[cl-net-snmp-cvs] r53 - in trunk: asn.1 mibs

Author: ctian Date: Mon Sep 24 14:47:30 2007 New Revision: 53

Added: trunk/mibs/AGENTX-MIB.txt trunk/mibs/BGP4-MIB.txt trunk/mibs/DISMAN-EVENT-MIB.txt trunk/mibs/DISMAN-SCHEDULE-MIB.txt trunk/mibs/DISMAN-SCRIPT-MIB.txt trunk/mibs/EtherLike-MIB.txt trunk/mibs/HCNUM-TC.txt trunk/mibs/HOST-RESOURCES-MIB.txt trunk/mibs/HOST-RESOURCES-TYPES.txt trunk/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt trunk/mibs/IANA-LANGUAGE-MIB.txt trunk/mibs/IANA-RTPROTO-MIB.txt trunk/mibs/IANAifType-MIB.txt trunk/mibs/IF-INVERTED-STACK-MIB.txt trunk/mibs/INET-ADDRESS-MIB.txt trunk/mibs/IP-FORWARD-MIB.txt trunk/mibs/IP-MIB.txt trunk/mibs/SNMP-FRAMEWORK-MIB.txt trunk/mibs/SNMP-TARGET-MIB.txt Modified: trunk/asn.1/asn.1-domain.lisp trunk/asn.1/asn.1.tab trunk/asn.1/asn.1.zb trunk/asn.1/mib-browse.lisp trunk/asn.1/mib.lisp trunk/asn.1/parse.lisp Log: More MIBS

Modified: trunk/asn.1/asn.1-domain.lisp ============================================================================== --- trunk/asn.1/asn.1-domain.lisp (original) +++ trunk/asn.1/asn.1-domain.lisp Mon Sep 24 14:47:30 2007 @@ -138,89 +138,109 @@ IDENTIFIER BODY)

-(DEFUN ASSIGNMENT*1074 (ASSIGNMENT ASSIGNMENT*) +(DEFUN ASSIGNMENT*1166 (ASSIGNMENT ASSIGNMENT*) (MAKE-KB-SEQUENCE :FIRST ASSIGNMENT :REST ASSIGNMENT*))

-(DEFUN SYMBOL*,1$1075 (SYMBOL |Rest-SYMBOL*,1$|) +(DEFUN SYMBOL*,1$1167 (SYMBOL |Rest-SYMBOL*,1$|) (MAKE-KB-SEQUENCE :FIRST SYMBOL :REST |Rest-SYMBOL*,1$|))

-(DEFUN |Rest-SYMBOL*,1$1076| (DUMMY SYMBOL |Rest-SYMBOL*,1$|) +(DEFUN |Rest-SYMBOL*,1$1168| (DUMMY SYMBOL |Rest-SYMBOL*,1$|) (DECLARE (IGNORE DUMMY)) (MAKE-KB-SEQUENCE :FIRST SYMBOL :REST |Rest-SYMBOL*,1$|))

-(DEFUN SYMBOLS-FROM-MODULE*1077 +(DEFUN SYMBOLS-FROM-MODULE*1169 (SYMBOLS-FROM-MODULE SYMBOLS-FROM-MODULE*) (MAKE-KB-SEQUENCE :FIRST SYMBOLS-FROM-MODULE :REST SYMBOLS-FROM-MODULE*))

-(DEFUN SYMBOL+,1$1078 (SYMBOL) (MAKE-KB-SEQUENCE :FIRST SYMBOL)) +(DEFUN SYMBOL+,1$1170 (SYMBOL) (MAKE-KB-SEQUENCE :FIRST SYMBOL))

-(DEFUN SYMBOL+,1$1079 (SYMBOL DUMMY SYMBOL+,1$) +(DEFUN SYMBOL+,1$1171 (SYMBOL DUMMY SYMBOL+,1$) (DECLARE (IGNORE DUMMY)) (MAKE-KB-SEQUENCE :FIRST SYMBOL :REST SYMBOL+,1$))

-(DEFUN GARBAGE+1080 (GARBAGE) (MAKE-KB-SEQUENCE :FIRST GARBAGE)) +(DEFUN GARBAGE+1172 (GARBAGE) (MAKE-KB-SEQUENCE :FIRST GARBAGE))

-(DEFUN GARBAGE+1081 (GARBAGE GARBAGE+) +(DEFUN GARBAGE+1173 (GARBAGE GARBAGE+) (MAKE-KB-SEQUENCE :FIRST GARBAGE :REST GARBAGE+))

-(DEFUN MODULE-REVISION*1082 (MODULE-REVISION MODULE-REVISION*) +(DEFUN MODULE-REVISION*1174 (MODULE-REVISION MODULE-REVISION*) (MAKE-KB-SEQUENCE :FIRST MODULE-REVISION :REST MODULE-REVISION*))

-(DEFUN IDENTIFIER+,1$1083 (IDENTIFIER) +(DEFUN IDENTIFIER+,1$1175 (IDENTIFIER) (MAKE-KB-SEQUENCE :FIRST IDENTIFIER))

-(DEFUN IDENTIFIER+,1$1084 (IDENTIFIER DUMMY IDENTIFIER+,1$) +(DEFUN IDENTIFIER+,1$1176 (IDENTIFIER DUMMY IDENTIFIER+,1$) (DECLARE (IGNORE DUMMY)) (MAKE-KB-SEQUENCE :FIRST IDENTIFIER :REST IDENTIFIER+,1$))

-(DEFUN MODULE-COMPLIANCE-GROUP*1085 - (MODULE-COMPLIANCE-GROUP MODULE-COMPLIANCE-GROUP*) +(DEFUN MODULE-COMPLIANCE-BODY*1177 + (MODULE-COMPLIANCE-BODY MODULE-COMPLIANCE-BODY*) (MAKE-KB-SEQUENCE :FIRST - MODULE-COMPLIANCE-GROUP + MODULE-COMPLIANCE-BODY :REST - MODULE-COMPLIANCE-GROUP*)) + MODULE-COMPLIANCE-BODY*))

-(DEFUN MODULE-COMPLIANCE-OBJECT*1086 - (MODULE-COMPLIANCE-OBJECT MODULE-COMPLIANCE-OBJECT*) +(DEFUN OBJECT-TYPE-INDEX-VALUE+,1$1178 (OBJECT-TYPE-INDEX-VALUE) + (MAKE-KB-SEQUENCE :FIRST OBJECT-TYPE-INDEX-VALUE)) + +(DEFUN OBJECT-TYPE-INDEX-VALUE+,1$1179 + (OBJECT-TYPE-INDEX-VALUE DUMMY OBJECT-TYPE-INDEX-VALUE+,1$) + (DECLARE (IGNORE DUMMY)) (MAKE-KB-SEQUENCE :FIRST - MODULE-COMPLIANCE-OBJECT + OBJECT-TYPE-INDEX-VALUE :REST - MODULE-COMPLIANCE-OBJECT*)) + OBJECT-TYPE-INDEX-VALUE+,1$)) + +(DEFUN IDENTIFIER*,1$1180 (IDENTIFIER |Rest-IDENTIFIER*,1$|) + (MAKE-KB-SEQUENCE :FIRST IDENTIFIER :REST |Rest-IDENTIFIER*,1$|))

-(DEFUN OBJ-ID-COMPONENT+1087 (OBJ-ID-COMPONENT) +(DEFUN |Rest-IDENTIFIER*,1$1181| + (DUMMY IDENTIFIER |Rest-IDENTIFIER*,1$|) + (DECLARE (IGNORE DUMMY)) + (MAKE-KB-SEQUENCE :FIRST IDENTIFIER :REST |Rest-IDENTIFIER*,1$|)) + +(DEFUN OBJ-ID-COMPONENT+1182 (OBJ-ID-COMPONENT) (MAKE-KB-SEQUENCE :FIRST OBJ-ID-COMPONENT))

-(DEFUN OBJ-ID-COMPONENT+1088 (OBJ-ID-COMPONENT OBJ-ID-COMPONENT+) +(DEFUN OBJ-ID-COMPONENT+1183 (OBJ-ID-COMPONENT OBJ-ID-COMPONENT+) (MAKE-KB-SEQUENCE :FIRST OBJ-ID-COMPONENT :REST OBJ-ID-COMPONENT+))

-(DEFUN NAMED-NUMBER+,1$1089 (NAMED-NUMBER) +(DEFUN SPLITED-NUMBERS+|1$1184 (SPLITED-NUMBERS) + (MAKE-KB-SEQUENCE :FIRST SPLITED-NUMBERS)) + +(DEFUN SPLITED-NUMBERS+|1$1185 + (SPLITED-NUMBERS DUMMY SPLITED-NUMBERS+|1$) + (DECLARE (IGNORE DUMMY)) + (MAKE-KB-SEQUENCE :FIRST SPLITED-NUMBERS :REST SPLITED-NUMBERS+|1$)) + +(DEFUN NAMED-NUMBER+,1$1186 (NAMED-NUMBER) (MAKE-KB-SEQUENCE :FIRST NAMED-NUMBER))

-(DEFUN NAMED-NUMBER+,1$1090 (NAMED-NUMBER DUMMY NAMED-NUMBER+,1$) +(DEFUN NAMED-NUMBER+,1$1187 (NAMED-NUMBER DUMMY NAMED-NUMBER+,1$) (DECLARE (IGNORE DUMMY)) (MAKE-KB-SEQUENCE :FIRST NAMED-NUMBER :REST NAMED-NUMBER+,1$))

-(DEFUN GARBAGE*1091 (GARBAGE GARBAGE*) +(DEFUN GARBAGE*1188 (GARBAGE GARBAGE*) (MAKE-KB-SEQUENCE :FIRST GARBAGE :REST GARBAGE*))

-(DEFUN NAME-AND-NUMBER-FORM1092 (IDENTIFIER DUMMY NUMBER-FORM DUMMY1) +(DEFUN NAME-AND-NUMBER-FORM1189 (IDENTIFIER DUMMY NUMBER-FORM DUMMY1) (DECLARE (IGNORE DUMMY1 DUMMY)) (MAKE-OBJ-ID-COMPONENT :NAME IDENTIFIER :VALUE NUMBER-FORM))

-(DEFUN OBJECT-IDENTIFIER-VALUE1093 (DUMMY OBJ-ID-COMPONENT+ DUMMY1) +(DEFUN OBJECT-IDENTIFIER-VALUE1190 (DUMMY OBJ-ID-COMPONENT+ DUMMY1) (DECLARE (IGNORE DUMMY1 DUMMY)) (MAKE-OBJECT-IDENTIFIER-VALUE :VALUE OBJ-ID-COMPONENT+))

-(DEFUN VALUE-ASSIGNMENT1094 (IDENTIFIER TYPE DUMMY VALUE) +(DEFUN VALUE-ASSIGNMENT1191 (IDENTIFIER TYPE DUMMY VALUE) (DECLARE (IGNORE DUMMY)) (MAKE-VALUE-ASSIGNMENT :NAME IDENTIFIER :TYPE TYPE :VALUE VALUE))

-(DEFUN VALUE-ASSIGNMENT1095 - (IDENTIFIER DUMMY DUMMY1 STATUS DUMMY2 DESCRIPTION DUMMY3 - OBJECT-IDENTIFIER-VALUE) +(DEFUN VALUE-ASSIGNMENT1192 + (IDENTIFIER DUMMY DUMMY1 STATUS DUMMY2 DESCRIPTION + OBJECT-IDENTITY-REFERENCE DUMMY3 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY3 DUMMY2 DUMMY1 DUMMY)) (MAKE-VALUE-ASSIGNMENT :NAME IDENTIFIER @@ -229,7 +249,7 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1096 +(DEFUN VALUE-ASSIGNMENT1193 (IDENTIFIER DUMMY DUMMY1 LAST-UPDATED DUMMY2 ORGANIZATION DUMMY3 CONTACT-INFO DUMMY4 DESCRIPTION MODULE-REVISION* DUMMY5 OBJECT-IDENTIFIER-VALUE) @@ -241,10 +261,11 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1097 - (IDENTIFIER DUMMY DUMMY1 TYPE DUMMY2 MAX-ACCESS DUMMY3 STATUS - DUMMY4 DESCRIPTION OBJECT-TYPE-INDEX OBJECT-TYPE-AUGMENTS - OBJECT-TYPE-DEFVAL DUMMY5 OBJECT-IDENTIFIER-VALUE) +(DEFUN VALUE-ASSIGNMENT1194 + (IDENTIFIER DUMMY DUMMY1 TYPE OBJECT-TYPE-UNITS DUMMY2 + MAX-ACCESS DUMMY3 STATUS DUMMY4 DESCRIPTION OBJECT-TYPE-INDEX + OBJECT-TYPE-AUGMENTS OBJECT-TYPE-REFERENCE OBJECT-TYPE-DEFVAL + DUMMY5 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY5 DUMMY4 DUMMY3 DUMMY2 DUMMY1 DUMMY)) (MAKE-VALUE-ASSIGNMENT :NAME IDENTIFIER @@ -253,7 +274,7 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1098 +(DEFUN VALUE-ASSIGNMENT1195 (IDENTIFIER DUMMY NOTIFICATION-TYPE-OBJECTS DUMMY1 STATUS DUMMY2 DESCRIPTION DUMMY3 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY3 DUMMY2 DUMMY1 DUMMY)) @@ -264,7 +285,7 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1099 +(DEFUN VALUE-ASSIGNMENT1196 (IDENTIFIER DUMMY DUMMY1 DUMMY2 IDENTIFIER+,1$ DUMMY3 DUMMY4 STATUS DUMMY5 DESCRIPTION DUMMY6 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY6 DUMMY5 DUMMY4 DUMMY3 DUMMY2 DUMMY1 DUMMY)) @@ -275,10 +296,10 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1100 +(DEFUN VALUE-ASSIGNMENT1197 (IDENTIFIER DUMMY DUMMY1 STATUS DUMMY2 DESCRIPTION DUMMY3 DUMMY4 - DUMMY5 IDENTIFIER+,1$ DUMMY6 MODULE-COMPLIANCE-GROUP* - MODULE-COMPLIANCE-OBJECT* DUMMY7 OBJECT-IDENTIFIER-VALUE) + DUMMY5 IDENTIFIER+,1$ DUMMY6 MODULE-COMPLIANCE-BODY* + MODULE-COMPLIANCE-OTHER DUMMY7 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY7 DUMMY6 @@ -295,7 +316,7 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN VALUE-ASSIGNMENT1101 +(DEFUN VALUE-ASSIGNMENT1198 (IDENTIFIER DUMMY DUMMY1 DUMMY2 IDENTIFIER+,1$ DUMMY3 DUMMY4 STATUS DUMMY5 DESCRIPTION DUMMY6 OBJECT-IDENTIFIER-VALUE) (DECLARE (IGNORE DUMMY6 DUMMY5 DUMMY4 DUMMY3 DUMMY2 DUMMY1 DUMMY)) @@ -306,13 +327,13 @@ :VALUE OBJECT-IDENTIFIER-VALUE))

-(DEFUN ASSIGNMENT1102 (TYPE-ASSIGNMENT) +(DEFUN ASSIGNMENT1199 (TYPE-ASSIGNMENT) (MAKE-ASSIGNMENT :TYPE :TYPE :VALUE TYPE-ASSIGNMENT))

-(DEFUN ASSIGNMENT1103 (VALUE-ASSIGNMENT) +(DEFUN ASSIGNMENT1200 (VALUE-ASSIGNMENT) (MAKE-ASSIGNMENT :TYPE :VALUE :VALUE VALUE-ASSIGNMENT))

-(DEFUN SYMBOLS-FROM-MODULE1104 +(DEFUN SYMBOLS-FROM-MODULE1201 (SYMBOL+,1$ DUMMY GLOBAL-MODULE-REFERENCE) (DECLARE (IGNORE DUMMY)) (MAKE-SYMBOLS-FROM-MODULE :SYMBOLS @@ -320,19 +341,19 @@ :GLOBAL-MODULE-REFERENCE GLOBAL-MODULE-REFERENCE))

-(DEFUN IMPORTS1105 (DUMMY SYMBOLS-FROM-MODULE* DUMMY1) +(DEFUN IMPORTS1202 (DUMMY SYMBOLS-FROM-MODULE* DUMMY1) (DECLARE (IGNORE DUMMY1 DUMMY)) (MAKE-IMPORTS :VALID T :LIST SYMBOLS-FROM-MODULE*))

-(DEFUN EXPORTS1106 (DUMMY SYMBOL*,1$ DUMMY1) +(DEFUN EXPORTS1203 (DUMMY SYMBOL*,1$ DUMMY1) (DECLARE (IGNORE DUMMY1 DUMMY)) (MAKE-EXPORTS :LIST SYMBOL*,1$))

-(DEFUN EXPORTS1107 (DUMMY DUMMY1 DUMMY2) +(DEFUN EXPORTS1204 (DUMMY DUMMY1 DUMMY2) (DECLARE (IGNORE DUMMY2 DUMMY1 DUMMY)) (MAKE-EXPORTS :ALL-EXPORTS T))

-(DEFUN MODULE-BODY1108 (EXPORTS IMPORTS ASSIGNMENT*) +(DEFUN MODULE-BODY1205 (EXPORTS IMPORTS ASSIGNMENT*) (MAKE-MODULE-BODY :ASSIGNMENT-LIST ASSIGNMENT* :EXPORTS @@ -340,7 +361,7 @@ :IMPORTS IMPORTS))

-(DEFUN MODULE-DEFINITION1109 +(DEFUN MODULE-DEFINITION1206 (MODULE-IDENTIFIER DUMMY DUMMY1 DUMMY2 MODULE-BODY DUMMY3) (DECLARE (IGNORE DUMMY3 DUMMY2 DUMMY1 DUMMY)) (MAKE-MODULE-DEFINITION :IDENTIFIER @@ -486,3 +507,50 @@ ZEBU::INDEX) (RETURN-FROM ZEBU::FINAL-RETURN T))))))))) (SECOND (SVREF ZEBU::*REGEX-GROUPS* 0)))) + +(DEFUN HSTRING + (STRING &OPTIONAL (ZEBU::START 0) (ZEBU::END (LENGTH STRING))) + (WHEN (PROGN + (SETF ZEBU::*REGEX-GROUPINGS* 1) + (BLOCK ZEBU::FINAL-RETURN + (BLOCK ZEBU::COMPARE + (LET ((ZEBU::INDEX ZEBU::START) (LENGTH ZEBU::END)) + (SETF (SVREF ZEBU::*REGEX-GROUPS* 0) + (LIST ZEBU::INDEX NIL)) + (IF (AND (< ZEBU::INDEX LENGTH) + (EQL (CHAR STRING ZEBU::INDEX) #')) + (INCF ZEBU::INDEX) + (RETURN-FROM ZEBU::COMPARE NIL)) + (LET ((ZEBU::OINDEX ZEBU::INDEX)) + (BLOCK ZEBU::COMPARE + (DO () + (NIL) + (LET ((ZEBU::RANGE + #*0000000000000000000000000000000000000000000000001111111111000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000)) + (IF (>= ZEBU::INDEX LENGTH) + (RETURN-FROM ZEBU::COMPARE NIL)) + (IF (= 1 + (SBIT + ZEBU::RANGE + (CHAR-CODE (CHAR STRING ZEBU::INDEX)))) + (INCF ZEBU::INDEX) + (RETURN-FROM ZEBU::COMPARE NIL))))) + (DO ((ZEBU::START ZEBU::INDEX (1- ZEBU::START))) + ((< ZEBU::START ZEBU::OINDEX) NIL) + (LET ((ZEBU::INDEX ZEBU::START)) + (BLOCK ZEBU::COMPARE + (LET ((ZEBU::NEW-INDEX (+ ZEBU::INDEX 2))) + (IF (< LENGTH ZEBU::NEW-INDEX) + (RETURN-FROM ZEBU::COMPARE NIL)) + (IF (STRING= STRING + "'H" + :START1 + ZEBU::INDEX + :END1 + ZEBU::NEW-INDEX) + (INCF ZEBU::INDEX 2) + (RETURN-FROM ZEBU::COMPARE NIL))) + (SETF (CADR (SVREF ZEBU::*REGEX-GROUPS* 0)) + ZEBU::INDEX) + (RETURN-FROM ZEBU::FINAL-RETURN T))))))))) + (SECOND (SVREF ZEBU::*REGEX-GROUPS* 0))))

Modified: trunk/asn.1/asn.1.tab ============================================================================== --- trunk/asn.1/asn.1.tab (original) +++ trunk/asn.1/asn.1.tab Mon Sep 24 14:47:30 2007 @@ -1,303 +1,347 @@

-(:FILE "/home/binghe/cl-net-snmp/asn.1/asn.1.zb" :NAME "ASN.1" :DOMAIN-FILE "asn.1-domain.lisp" :PACKAGE "ASN.1" :GRAMMAR "zebu-mg" :IDENTIFIER-START-CHARS "abcdefghijklmnopqrstuvwxyz" :IDENTIFIER-CONTINUE-CHARS "-abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890" :CASE-SENSITIVE T :LEX-CATS ((TYPE-REFERENCE "[A-Z][a-zA-Z0-9-]*") (SIGNED-NUMBER "-?[0-9]+") (ANYTHING "[^ ]+")) :DOMAIN (KB-DOMAIN :SUBTYPE (OBJ-ID-COMPONENT :SLOTS (NAME VALUE)) :SUBTYPE (OBJECT-IDENTIFIER-VALUE :SLOTS (VALUE)) :SUBTYPE (VALUE-ASSIGNMENT :SLOTS (NAME TYPE VALUE)) :SUBTYPE (ASSIGNMENT :SLOTS (TYPE VALUE)) :SUBTYPE (SYMBOLS-FROM-MODULE :SLOTS (SYMBOLS GLOBAL-MODULE-REFERENCE)) :SUBTYPE (IMPORTS :SLOTS ((LIST KB-SEQUENCE) VALID)) :SUBTYPE (EXPORTS :SLOTS ((LIST KB-SEQUENCE) ALL-EXPORTS)) :SUBTYPE (MODULE-BODY :SLOTS (EXPORTS IMPORTS (ASSIGNMENT-LIST KB-SEQUENCE))) :SUBTYPE (MODULE-DEFINITION :SLOTS (IDENTIFIER BODY))) :DOMAIN-FILE "/home/binghe/cl-net-snmp/asn.1/asn.1-domain.lisp") -#139(ZEBU::THE-EMPTY-STRING ZEBU::AUGMENTED-START ZEBU::THE-END-G-SYMBOL MODULE-DEFINITION MODULE-IDENTIFIER "DEFINITIONS" "::=" "BEGIN" MODULE-BODY "END" MODULE-REFERENCE TYPE-REFERENCE EXPORTS IMPORTS ASSIGNMENT* "EXPORTS" SYMBOL*,1$ ";" "ALL" SYMBOL REFERENCE "IMPORTS" SYMBOLS-FROM-MODULE* SYMBOLS-FROM-MODULE SYMBOL+,1$ "FROM" GLOBAL-MODULE-REFERENCE IDENTIFIER ASSIGNMENT TYPE-ASSIGNMENT VALUE-ASSIGNMENT TYPE "MACRO" GARBAGE+ GARBAGE ANYTHING VALUE "OBJECT-IDENTITY" "STATUS" STATUS "DESCRIPTION" DESCRIPTION OBJECT-IDENTIFIER-VALUE "MODULE-IDENTITY" "LAST-UPDATED" LAST-UPDATED "ORGANIZATION" ORGANIZATION "CONTACT-INFO" CONTACT-INFO MODULE-REVISION* "OBJECT-TYPE" "SYNTAX" "MAX-ACCESS" MAX-ACCESS OBJECT-TYPE-INDEX OBJECT-TYPE-AUGMENTS OBJECT-TYPE-DEFVAL "NOTIFICATION-TYPE" NOTIFICATION-TYPE-OBJECTS "NOTIFICATION-GROUP" "NOTIFICATIONS" "{" IDENTIFIER+,1$ "}" "MODULE-COMPLIANCE" "MODULE" "MANDATORY-GROUPS" MODULE-COMPLIANCE-GROUP* MODULE-COMPLIANCE-OBJECT* "OBJECT-GROUP" "OBJECTS" MIN-ACCESS STRING MODULE-REVISION "REVISION" "INDEX" "AUGMENTS" "DEFVAL" MODULE-COMPLIANCE-GROUP "GROUP" MODULE-COMPLIANCE-OBJECT "OBJECT" MODULE-COMPLIANCE-OBJECT-SYNTAX "MIN-ACCESS" BUILTIN-TYPE NAMED-TYPE OBJECT-IDENTIFIER-TYPE CHOICE-TYPE STRING-TYPE INTEGER-TYPE SEQUENCE-OF-TYPE SEQUENCE-TYPE TEXTUAL-CONVENTION-TYPE TAGGED-TYPE "TEXTUAL-CONVENTION" TEXTUAL-CONVENTION-DISPLAY-HINT TEXTUAL-CONVENTION-REFERENCE "DISPLAY-HINT" "REFERENCE" "IDENTIFIER" BUILTIN-VALUE OBJ-ID-COMPONENT+ OBJ-ID-COMPONENT NAME-AND-NUMBER-FORM NAME-FORM NUMBER-FORM "(" ")" NUMBER "CHOICE" "OCTET" "STRING" STRING-OPTIONS "DisplayString" "SIZE" NUMBERS SIGNED-NUMBER "|" ".." "INTEGER" NAMED-NUMBER+,1$ "Integer32" NAMED-NUMBER "SEQUENCE" GARBAGE* "OF" TAG "IMPLICIT" "EXPLICIT" "[" CLASS CLASS-NUMBER "]" "UNIVERSAL" "APPLICATION" "PRIVATE" "," |Rest-SYMBOL*,1$| ) +(:FILE "/home/binghe/cl-net-snmp/asn.1/asn.1.zb" :NAME "ASN.1" :DOMAIN-FILE "asn.1-domain.lisp" :PACKAGE "ASN.1" :GRAMMAR "zebu-mg" :IDENTIFIER-START-CHARS "abcdefghijklmnopqrstuvwxyz" :IDENTIFIER-CONTINUE-CHARS "-abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890" :CASE-SENSITIVE T :LEX-CATS ((TYPE-REFERENCE "[A-Z][a-zA-Z0-9-]*") (SIGNED-NUMBER "-?[0-9]+") (ANYTHING "[^ ]+") (HSTRING "'[0-9]*'H")) :DOMAIN (KB-DOMAIN :SUBTYPE (OBJ-ID-COMPONENT :SLOTS (NAME VALUE)) :SUBTYPE (OBJECT-IDENTIFIER-VALUE :SLOTS (VALUE)) :SUBTYPE (VALUE-ASSIGNMENT :SLOTS (NAME TYPE VALUE)) :SUBTYPE (ASSIGNMENT :SLOTS (TYPE VALUE)) :SUBTYPE (SYMBOLS-FROM-MODULE :SLOTS (SYMBOLS GLOBAL-MODULE-REFERENCE)) :SUBTYPE (IMPORTS :SLOTS ((LIST KB-SEQUENCE) VALID)) :SUBTYPE (EXPORTS :SLOTS ((LIST KB-SEQUENCE) ALL-EXPORTS)) :SUBTYPE (MODULE-BODY :SLOTS (EXPORTS IMPORTS (ASSIGNMENT-LIST KB-SEQUENCE))) :SUBTYPE (MODULE-DEFINITION :SLOTS (IDENTIFIER BODY))) :DOMAIN-FILE "/home/binghe/cl-net-snmp/asn.1/asn.1-domain.lisp") +#166(ZEBU::THE-EMPTY-STRING ZEBU::AUGMENTED-START ZEBU::THE-END-G-SYMBOL MODULE-DEFINITION MODULE-IDENTIFIER "DEFINITIONS" "::=" "BEGIN" MODULE-BODY "END" MODULE-REFERENCE TYPE-REFERENCE EXPORTS IMPORTS ASSIGNMENT* "EXPORTS" SYMBOL*,1$ ";" "ALL" SYMBOL REFERENCE "IMPORTS" SYMBOLS-FROM-MODULE* SYMBOLS-FROM-MODULE SYMBOL+,1$ "FROM" GLOBAL-MODULE-REFERENCE IDENTIFIER ASSIGNMENT TYPE-ASSIGNMENT VALUE-ASSIGNMENT TYPE "MACRO" GARBAGE+ GARBAGE ANYTHING VALUE "OBJECT-IDENTITY" "STATUS" STATUS "DESCRIPTION" DESCRIPTION OBJECT-IDENTITY-REFERENCE OBJECT-IDENTIFIER-VALUE "MODULE-IDENTITY" "LAST-UPDATED" LAST-UPDATED "ORGANIZATION" ORGANIZATION "CONTACT-INFO" CONTACT-INFO MODULE-REVISION* "OBJECT-TYPE" "SYNTAX" OBJECT-TYPE-UNITS "MAX-ACCESS" MAX-ACCESS OBJECT-TYPE-INDEX OBJECT-TYPE-AUGMENTS OBJECT-TYPE-REFERENCE OBJECT-TYPE-DEFVAL "NOTIFICATION-TYPE" NOTIFICATION-TYPE-OBJECTS "NOTIFICATION-GROUP" "NOTIFICATIONS" "{" IDENTIFIER+,1$ "}" "MODULE-COMPLIANCE" "MODULE" "MANDATORY-GROUPS" MODULE-COMPLIANCE-BODY* MODULE-COMPLIANCE-OTHER "OBJECT-GROUP" "OBJECTS" MIN-ACCESS STRING MODULE-REVISION "REVISION" "REFERENCE" "INDEX" OBJECT-TYPE-INDEX-VALUE+,1$ OBJECT-TYPE-INDEX-VALUE "IMPLIED" "AUGMENTS" "DEFVAL" OBJECT-TYPE-DEFVAL-VALUE HSTRING OBJ-ID-COMPONENT IDENTIFIER*,1$ "UNITS" MODULE-COMPLIANCE-BODY MODULE-COMPLIANCE-GROUP MODULE-COMPLIANCE-OBJECT "GROUP" "OBJECT" MODULE-COMPLIANCE-OBJECT-SYNTAX MODULE-COMPLIANCE-OBJECT-WRITE-SYNTAX MODULE-COMPLIANCE-OBJECT-ACCESS "WRITE-SYNTAX" "MIN-ACCESS" BUILTIN-TYPE NAMED-TYPE OBJECT-IDENTIFIER-TYPE CHOICE-TYPE STRING-TYPE INTEGER-TYPE SEQUENCE-OF-TYPE SEQUENCE-TYPE TEXTUAL-CONVENTION-TYPE TAGGED-TYPE "TEXTUAL-CONVENTION" TEXTUAL-CONVENTION-DISPLAY-HINT TEXTUAL-CONVENTION-REFERENCE "DISPLAY-HINT" "IDENTIFIER" BUILTIN-VALUE OBJ-ID-COMPONENT+ NAME-AND-NUMBER-FORM NAME-FORM NUMBER-FORM "(" ")" NUMBER "CHOICE" STRING-TYPE-NAME STRING-OPTIONS "OCTET" "STRING" "DisplayString" "PhysAddress" "SnmpAdminString" "DateAndTime" "InternationalDisplayString" "SIZE" NUMBERS SIGNED-NUMBER "|" ".." INTEGER-TYPE-NAME SPLITED-NUMBERS+|1$ NAMED-NUMBER+,1$ "INTEGER" "Integer32" "Unsigned32" "RowStatus" "SnmpSecurityModel" "BITS" SPLITED-NUMBERS NAMED-NUMBER "SEQUENCE" GARBAGE* "OF" TAG "IMPLICIT" "EXPLICIT" "[" CLASS CLASS-NUMBER "]" "UNIVERSAL" "APPLICATION" "PRIVATE" "," |Rest-IDENTIFIER*,1$| |Rest-SYMBOL*,1$| )

-#68(5 6 7 9 11 15 17 18 21 25 27 32 35 37 38 40 43 44 46 48 51 52 53 58 60 61 62 64 65 66 67 70 71 73 75 76 77 78 80 82 84 95 98 99 100 107 108 109 110 111 112 114 115 117 118 119 120 122 124 126 128 129 130 133 134 135 136 137 ) +#80(5 6 7 9 11 15 17 18 21 25 27 32 35 37 38 40 44 45 47 49 52 53 55 61 63 64 65 67 68 69 70 73 74 76 78 79 80 83 84 85 87 90 94 95 99 100 111 114 115 121 122 123 124 127 128 129 130 131 132 133 134 136 137 138 142 143 144 145 146 147 150 152 154 155 156 159 160 161 162 163 )

-#125((1 . 1)(3 . 6)(4 . 1)(10 . 1)(8 . 3)(8 . 0)(12 . 3)(12 . 3)(12 . 0)(19 . 1)(13 . 3)(13 . 0)(23 . 3)(26 . 1)(20 . 1)(20 . 1)(28 . 1)(28 . 1)(29 . 3)(29 . 6)(34 . 1)(30 . 4)(30 . 8)(30 . 13)(30 . 15)(30 . 9)(30 . 12)(30 . 15)(30 . 12)(39 . 1)(54 . 1)(72 . 1)(41 . 1)(45 . 1)(47 . 1)(49 . 1)(74 . 4)(55 . 4)(55 . 0)(56 . 4)(56 . 0)(57 . 4)(57 . 0)(79 . 4)(81 . 7)(83 . 2)(83 . 0)(59 . 4)(59 . 0)(31 . 1)(31 . 1)(85 . 1)(85 . 1)(85 . 1)(85 . 1)(85 . 1)(85 . 1)(85 . 1)(85 . 1)(86 . 1)(93 . 9)(96 . 2)(96 . 0)(97 . 2)(97 . 0)(87 . 2)(36 . 1)(101 . 1)(42 . 3)(103 . 1)(103 . 1)(103 . 1)(104 . 4)(105 . 1)(106 . 1)(88 . 4)(89 . 3)(89 . 2)(113 . 6)(113 . 0)(116 . 3)(116 . 3)(116 . 1)(90 . 6)(90 . 4)(90 . 6)(90 . 1)(123 . 4)(92 . 4)(91 . 3)(94 . 2)(94 . 3)(94 . 3)(127 . 4)(132 . 1)(131 . 1)(131 . 1)(131 . 1)(131 . 0)(125 . 0)(125 . 2)(121 . 1)(121 . 3)(102 . 1)(102 . 2)(69 . 0)(69 . 2)(68 . 0)(68 . 2)(63 . 1)(63 . 3)(50 . 0)(50 . 2)(33 . 1)(33 . 2)(24 . 1)(24 . 3)(22 . 0)(22 . 2)(138 . 0)(138 . 3)(16 . 0)(16 . 2)(14 . 0)(14 . 2)) +#163((1 . 1)(3 . 6)(4 . 1)(10 . 1)(8 . 3)(8 . 0)(12 . 3)(12 . 3)(12 . 0)(19 . 1)(13 . 3)(13 . 0)(23 . 3)(26 . 1)(20 . 1)(20 . 1)(28 . 1)(28 . 1)(29 . 3)(29 . 6)(34 . 1)(30 . 4)(30 . 9)(30 . 13)(30 . 17)(30 . 9)(30 . 12)(30 . 15)(30 . 12)(39 . 1)(56 . 1)(75 . 1)(41 . 1)(46 . 1)(48 . 1)(50 . 1)(77 . 4)(42 . 2)(42 . 0)(57 . 4)(57 . 0)(82 . 2)(82 . 1)(58 . 4)(58 . 0)(60 . 4)(60 . 0)(86 . 1)(86 . 1)(86 . 1)(86 . 3)(54 . 2)(54 . 0)(59 . 2)(59 . 0)(91 . 1)(91 . 1)(72 . 6)(72 . 0)(92 . 4)(93 . 7)(96 . 2)(96 . 0)(97 . 2)(97 . 0)(98 . 2)(98 . 0)(62 . 4)(62 . 0)(31 . 1)(31 . 1)(101 . 1)(101 . 1)(101 . 1)(101 . 1)(101 . 1)(101 . 1)(101 . 1)(101 . 1)(102 . 1)(109 . 9)(112 . 2)(112 . 0)(113 . 2)(113 . 0)(103 . 2)(36 . 1)(116 . 1)(43 . 3)(88 . 1)(88 . 1)(88 . 1)(118 . 4)(119 . 1)(120 . 1)(104 . 4)(105 . 2)(125 . 2)(125 . 1)(125 . 1)(125 . 1)(125 . 1)(125 . 1)(126 . 6)(126 . 0)(135 . 3)(135 . 3)(135 . 1)(106 . 4)(106 . 4)(106 . 1)(139 . 1)(139 . 1)(139 . 1)(139 . 1)(139 . 1)(139 . 1)(148 . 1)(148 . 3)(149 . 4)(108 . 4)(107 . 3)(110 . 2)(110 . 3)(110 . 3)(153 . 4)(158 . 1)(157 . 1)(157 . 1)(157 . 1)(157 . 0)(151 . 0)(151 . 2)(141 . 1)(141 . 3)(140 . 1)(140 . 3)(117 . 1)(117 . 2)(164 . 0)(164 . 3)(89 . 0)(89 . 2)(81 . 1)(81 . 3)(71 . 0)(71 . 2)(66 . 1)(66 . 3)(51 . 0)(51 . 2)(33 . 1)(33 . 2)(24 . 1)(24 . 3)(22 . 0)(22 . 2)(165 . 0)(165 . 3)(16 . 0)(16 . 2)(14 . 0)(14 . 2))

-#288( +#332( ((11 :S 9)) ((2 :A 0)) ((5 :S 3)) ((6 :S 4)) ((7 :S 5)) -((9 :R 5) (11 :R 8) (15 :S 274) (21 :R 8) (27 :R 8)) +((9 :R 5) (11 :R 8) (15 :S 316) (21 :R 8) (27 :R 8)) ((9 :S 7)) ((2 :R 1)) ((5 :R 2)) ((5 :R 3) (11 :R 3) (17 :R 3) (27 :R 3)) ((9 :R 11) (11 :R 11) (21 :S 18) (27 :R 11)) -((9 :R 123) (11 :S 275) (27 :S 287)) +((9 :R 161) (11 :S 317) (27 :S 331)) ((9 :R 4)) ((17 :S 14)) ((9 :R 6) (11 :R 6) (21 :R 6) (27 :R 6)) ((17 :S 16)) ((9 :R 7) (11 :R 7) (21 :R 7) (27 :R 7)) -((17 :R 9) (25 :R 9) (137 :R 9)) -((11 :S 25) (17 :R 117) (27 :S 26)) +((17 :R 9) (25 :R 9) (163 :R 9)) +((11 :S 25) (17 :R 155) (27 :S 26)) ((17 :S 20)) ((9 :R 10) (11 :R 10) (27 :R 10)) ((25 :S 22)) ((11 :S 9)) ((11 :R 12) (17 :R 12) (27 :R 12)) ((11 :R 13) (17 :R 13) (27 :R 13)) -((17 :R 14) (25 :R 14) (137 :R 14)) -((17 :R 15) (25 :R 15) (137 :R 15)) +((17 :R 14) (25 :R 14) (163 :R 14)) +((17 :R 15) (25 :R 15) (163 :R 15)) ((9 :R 16) (11 :R 16) (27 :R 16)) ((9 :R 17) (11 :R 17) (27 :R 17)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) ((9 :R 18) (11 :R 18) (27 :R 18)) ((6 :S 32)) ((7 :S 33)) ((35 :S 36)) ((9 :S 35)) ((9 :R 19) (11 :R 19) (27 :R 19)) -((9 :R 20) (35 :R 20) (64 :R 20)) +((9 :R 20) (35 :R 20) (67 :R 20)) ((6 :S 38)) -((62 :S 185)) +((65 :S 215)) ((9 :R 21) (11 :R 21) (27 :R 21)) ((38 :S 41)) -((27 :S 117)) +((27 :S 120)) ((40 :S 43)) -((73 :S 120)) -((6 :S 45)) -((62 :S 185)) +((76 :S 123)) +((6 :R 38) (79 :S 131)) +((6 :S 46)) +((65 :S 215)) ((9 :R 22) (11 :R 22) (27 :R 22)) -((44 :S 48)) -((73 :S 121)) -((46 :S 50)) -((73 :S 122)) -((48 :S 52)) -((73 :S 123)) -((40 :S 54)) -((73 :S 120)) -((6 :R 111) (75 :S 124)) -((6 :S 57)) -((62 :S 185)) +((45 :S 49)) +((76 :S 124)) +((47 :S 51)) +((76 :S 125)) +((49 :S 53)) +((76 :S 126)) +((40 :S 55)) +((76 :S 123)) +((6 :R 149) (78 :S 127)) +((6 :S 58)) +((65 :S 215)) ((9 :R 23) (11 :R 23) (27 :R 23)) -((52 :S 60)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((53 :S 62)) -((27 :S 118)) -((38 :S 64)) -((27 :S 117)) -((40 :S 66)) -((73 :S 120)) -((6 :R 38) (76 :S 128) (77 :R 38) (78 :R 38)) -((6 :R 40) (77 :S 132) (78 :R 40)) -((6 :R 42) (78 :S 136)) -((6 :S 71)) -((62 :S 185)) +((53 :S 61)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((55 :R 52) (90 :S 154)) +((55 :S 64)) +((27 :S 121)) +((38 :S 66)) +((27 :S 120)) +((40 :S 68)) +((76 :S 123)) +((6 :R 40) (79 :R 40) (80 :S 133) (84 :R 40) (85 :R 40)) +((6 :R 44) (79 :R 44) (84 :S 140) (85 :R 44)) +((6 :R 54) (79 :S 156) (85 :R 54)) +((6 :R 46) (85 :S 144)) +((6 :S 74)) +((65 :S 215)) ((9 :R 24) (11 :R 24) (27 :R 24)) -((38 :R 48) (71 :S 153)) -((38 :S 75)) -((27 :S 117)) -((40 :S 77)) -((73 :S 120)) -((6 :S 79)) -((62 :S 185)) +((38 :R 68) (74 :S 183)) +((38 :S 78)) +((27 :S 120)) +((40 :S 80)) +((76 :S 123)) +((6 :S 82)) +((65 :S 215)) ((9 :R 25) (11 :R 25) (27 :R 25)) -((61 :S 82)) -((62 :S 83)) -((27 :S 282)) ((64 :S 85)) -((38 :S 86)) -((27 :S 117)) -((40 :S 88)) -((73 :S 120)) -((6 :S 90)) -((62 :S 185)) +((65 :S 86)) +((27 :S 325)) +((67 :S 88)) +((38 :S 89)) +((27 :S 120)) +((40 :S 91)) +((76 :S 123)) +((6 :S 93)) +((65 :S 215)) ((9 :R 26) (11 :R 26) (27 :R 26)) -((38 :S 93)) -((27 :S 117)) -((40 :S 95)) -((73 :S 120)) -((66 :S 97)) -((67 :S 98)) -((62 :S 99)) -((27 :S 282)) -((64 :S 101)) -((6 :R 107) (80 :S 140) (82 :R 107)) -((6 :R 105) (82 :S 144)) -((6 :S 104)) -((62 :S 185)) +((38 :S 96)) +((27 :S 120)) +((40 :S 98)) +((76 :S 123)) +((69 :S 100)) +((70 :S 101)) +((65 :S 102)) +((27 :S 325)) +((67 :S 104)) +((6 :R 145) (69 :R 145) (94 :S 166) (95 :S 170)) +((6 :R 58) (69 :S 160)) +((6 :S 107)) +((65 :S 215)) ((9 :R 27) (11 :R 27) (27 :R 27)) -((71 :S 107)) -((62 :S 108)) -((27 :S 282)) -((64 :S 110)) -((38 :S 111)) -((27 :S 117)) -((40 :S 113)) -((73 :S 120)) -((6 :S 115)) -((62 :S 185)) +((74 :S 110)) +((65 :S 111)) +((27 :S 325)) +((67 :S 113)) +((38 :S 114)) +((27 :S 120)) +((40 :S 116)) +((76 :S 123)) +((6 :S 118)) +((65 :S 215)) ((9 :R 28) (11 :R 28) (27 :R 28)) ((40 :R 29)) ((38 :R 30)) ((40 :R 31)) -((6 :R 32) (66 :R 32) (75 :R 32) (76 :R 32) (77 :R 32) (78 :R 32) (80 :R 32) (82 :R 32)) -((46 :R 33)) -((48 :R 34)) +((6 :R 32) (69 :R 32) (78 :R 32) (79 :R 32) (80 :R 32) (84 :R 32) (85 :R 32) (94 :R 32) (95 :R 32)) +((47 :R 33)) +((49 :R 34)) ((40 :R 35)) -((73 :S 125)) -((40 :S 126)) -((73 :S 127)) -((6 :R 36) (75 :R 36)) -((62 :S 129)) -((27 :S 282)) -((64 :S 131)) -((6 :R 37) (77 :R 37) (78 :R 37)) -((62 :S 133)) -((27 :S 134)) -((64 :S 135)) -((6 :R 39) (78 :R 39)) -((62 :S 137)) +((76 :S 128)) +((40 :S 129)) +((76 :S 130)) +((6 :R 36) (78 :R 36)) +((76 :S 132)) +((6 :R 37)) +((65 :S 134)) +((27 :S 139) (83 :S 137)) +((67 :S 136)) +((6 :R 39) (79 :R 39) (84 :R 39) (85 :R 39)) ((27 :S 138)) -((64 :S 139)) -((6 :R 41)) -((27 :S 141)) -((40 :S 142)) -((73 :S 120)) -((6 :R 43) (80 :R 43) (82 :R 43)) -((27 :S 145)) -((52 :S 151) (84 :R 46)) -((84 :S 147)) -((27 :S 119)) -((40 :S 149)) -((73 :S 120)) -((6 :R 44) (82 :R 44)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((84 :R 45)) -((62 :S 154)) -((27 :S 282)) -((64 :S 156)) -((38 :R 47)) -((6 :R 49) (9 :R 49) (11 :R 49) (27 :R 49) (53 :R 49) (84 :R 49)) -((6 :R 50) (9 :R 50) (11 :R 50) (27 :R 50) (53 :R 50) (84 :R 50)) -((6 :R 51) (9 :R 51) (11 :R 51) (27 :R 51) (53 :R 51) (84 :R 51)) -((6 :R 52) (9 :R 52) (11 :R 52) (27 :R 52) (53 :R 52) (84 :R 52)) -((6 :R 53) (9 :R 53) (11 :R 53) (27 :R 53) (53 :R 53) (84 :R 53)) -((6 :R 54) (9 :R 54) (11 :R 54) (27 :R 54) (53 :R 54) (84 :R 54)) -((6 :R 55) (9 :R 55) (11 :R 55) (27 :R 55) (53 :R 55) (84 :R 55)) -((6 :R 56) (9 :R 56) (11 :R 56) (27 :R 56) (53 :R 56) (84 :R 56)) -((6 :R 57) (9 :R 57) (11 :R 57) (27 :R 57) (53 :R 57) (84 :R 57)) -((6 :R 58) (9 :R 58) (11 :R 58) (27 :R 58) (53 :R 58) (84 :R 58)) -((6 :R 59) (9 :R 59) (11 :R 59) (27 :R 59) (53 :R 59) (84 :R 59)) -((38 :R 62) (98 :S 177)) -((38 :S 170)) +((67 :R 41) (163 :R 41)) +((67 :R 42) (163 :R 42)) +((65 :S 141)) +((27 :S 142)) +((67 :S 143)) +((6 :R 43) (79 :R 43) (85 :R 43)) +((65 :S 145)) +((27 :S 318) (65 :S 151) (76 :S 148) (87 :S 149) (123 :S 224)) +((67 :S 147)) +((6 :R 45)) +((67 :R 47)) +((67 :R 48)) +((67 :R 49)) +((27 :S 294) (67 :R 141)) +((67 :S 153)) +((67 :R 50)) +((76 :S 155)) +((55 :R 51)) +((76 :S 157)) +((6 :R 53) (85 :R 53)) +((6 :R 55) (69 :R 55) (94 :R 55) (95 :R 55)) +((6 :R 56) (69 :R 56) (94 :R 56) (95 :R 56)) +((11 :S 161)) +((70 :S 162)) +((65 :S 163)) +((27 :S 325)) +((67 :S 165)) +((6 :R 57)) +((27 :S 167)) +((40 :S 168)) +((76 :S 123)) +((6 :R 59) (69 :R 59) (94 :R 59) (95 :R 59)) ((27 :S 171)) -((40 :S 172)) -((73 :S 173)) -((52 :R 64) (99 :S 179)) -((52 :S 175)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((6 :R 60) (9 :R 60) (11 :R 60) (27 :R 60) (53 :R 60) (84 :R 60)) -((73 :S 178)) -((38 :R 61)) -((73 :S 180)) -((52 :R 63)) -((100 :S 182)) -((6 :R 65) (9 :R 65) (11 :R 65) (27 :R 65) (53 :R 65) (84 :R 65)) -((9 :R 66) (11 :R 66) (27 :R 66)) -((9 :R 67) (11 :R 67) (27 :R 67)) -((27 :S 276) (109 :S 194)) -((64 :S 187)) -((9 :R 68) (11 :R 68) (27 :R 68)) -((27 :R 69) (64 :R 69) (109 :R 69)) -((27 :R 70) (64 :R 70) (109 :R 70)) -((27 :R 71) (64 :R 71) (109 :R 71)) -((109 :S 194)) -((108 :S 193)) -((27 :R 72) (64 :R 72) (109 :R 72)) -((27 :R 74) (64 :R 74) (108 :R 74) (109 :R 74)) -((62 :S 196)) +((40 :R 62) (53 :S 177) (99 :R 62) (100 :R 62)) +((40 :R 64) (99 :S 179) (100 :R 64)) +((40 :R 66) (100 :S 181)) +((40 :S 175)) +((76 :S 123)) +((6 :R 60) (69 :R 60) (94 :R 60) (95 :R 60)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((40 :R 61) (99 :R 61) (100 :R 61)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((40 :R 63) (100 :R 63)) +((27 :S 122)) +((40 :R 65)) +((65 :S 184)) +((27 :S 325)) +((67 :S 186)) +((38 :R 67)) +((6 :R 69) (9 :R 69) (11 :R 69) (27 :R 69) (40 :R 69) (55 :R 69) (90 :R 69) (99 :R 69) (100 :R 69)) +((6 :R 70) (9 :R 70) (11 :R 70) (27 :R 70) (40 :R 70) (55 :R 70) (90 :R 70) (99 :R 70) (100 :R 70)) +((6 :R 71) (9 :R 71) (11 :R 71) (27 :R 71) (40 :R 71) (55 :R 71) (90 :R 71) (99 :R 71) (100 :R 71)) +((6 :R 72) (9 :R 72) (11 :R 72) (27 :R 72) (40 :R 72) (55 :R 72) (90 :R 72) (99 :R 72) (100 :R 72)) +((6 :R 73) (9 :R 73) (11 :R 73) (27 :R 73) (40 :R 73) (55 :R 73) (90 :R 73) (99 :R 73) (100 :R 73)) +((6 :R 74) (9 :R 74) (11 :R 74) (27 :R 74) (40 :R 74) (55 :R 74) (90 :R 74) (99 :R 74) (100 :R 74)) +((6 :R 75) (9 :R 75) (11 :R 75) (27 :R 75) (40 :R 75) (55 :R 75) (90 :R 75) (99 :R 75) (100 :R 75)) +((6 :R 76) (9 :R 76) (11 :R 76) (27 :R 76) (40 :R 76) (55 :R 76) (90 :R 76) (99 :R 76) (100 :R 76)) +((6 :R 77) (9 :R 77) (11 :R 77) (27 :R 77) (40 :R 77) (55 :R 77) (90 :R 77) (99 :R 77) (100 :R 77)) +((6 :R 78) (9 :R 78) (11 :R 78) (27 :R 78) (40 :R 78) (55 :R 78) (90 :R 78) (99 :R 78) (100 :R 78)) +((6 :R 79) (9 :R 79) (11 :R 79) (27 :R 79) (40 :R 79) (55 :R 79) (90 :R 79) (99 :R 79) (100 :R 79)) +((38 :R 82) (114 :S 207)) +((38 :S 200)) +((27 :S 201)) +((40 :S 202)) +((76 :S 203)) +((53 :R 84) (79 :S 209)) +((53 :S 205)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((6 :R 80) (9 :R 80) (11 :R 80) (27 :R 80) (40 :R 80) (55 :R 80) (90 :R 80) (99 :R 80) (100 :R 80)) +((76 :S 208)) +((38 :R 81)) +((76 :S 210)) +((53 :R 83)) +((115 :S 212)) +((6 :R 85) (9 :R 85) (11 :R 85) (27 :R 85) (40 :R 85) (55 :R 85) (90 :R 85) (99 :R 85) (100 :R 85)) +((9 :R 86) (11 :R 86) (27 :R 86)) +((9 :R 87) (11 :R 87) (27 :R 87)) +((27 :S 318) (123 :S 224)) +((67 :S 217)) +((9 :R 88) (11 :R 88) (27 :R 88)) +((27 :R 89) (67 :R 89) (123 :R 89)) +((27 :R 90) (67 :R 90) (123 :R 90)) +((27 :R 91) (67 :R 91) (123 :R 91)) +((123 :S 224)) +((122 :S 223)) +((27 :R 92) (67 :R 92) (123 :R 92)) +((27 :R 94) (67 :R 94) (122 :R 94) (123 :R 94)) +((65 :S 226)) ((35 :S 36)) -((64 :S 198)) -((6 :R 75) (9 :R 75) (11 :R 75) (27 :R 75) (53 :R 75) (84 :R 75)) -((112 :S 200)) -((6 :R 79) (9 :R 79) (11 :R 79) (27 :R 79) (53 :R 79) (84 :R 79) (107 :S 204)) -((6 :R 76) (9 :R 76) (11 :R 76) (27 :R 76) (53 :R 76) (84 :R 76)) -((6 :R 79) (9 :R 79) (11 :R 79) (27 :R 79) (53 :R 79) (84 :R 79) (107 :S 204)) -((6 :R 77) (9 :R 77) (11 :R 77) (27 :R 77) (53 :R 77) (84 :R 77)) -((115 :S 205)) -((107 :S 206)) -((117 :S 285)) -((108 :S 208)) -((108 :S 209)) -((6 :R 78) (9 :R 78) (11 :R 78) (27 :R 78) (53 :R 78) (84 :R 78)) -((117 :S 211)) -((108 :R 80)) -((117 :S 213)) -((108 :R 81)) -((117 :S 215)) -((119 :S 216)) -((117 :S 217)) -((108 :S 218)) -((6 :R 83) (9 :R 83) (11 :R 83) (27 :R 83) (53 :R 83) (84 :R 83)) -((27 :S 227)) -((64 :S 221)) -((6 :R 84) (9 :R 84) (11 :R 84) (27 :R 84) (53 :R 84) (84 :R 84)) -((117 :S 223)) -((119 :S 224)) -((117 :S 225)) -((108 :S 226)) -((6 :R 85) (9 :R 85) (11 :R 85) (27 :R 85) (53 :R 85) (84 :R 85)) -((107 :S 228)) -((117 :S 229)) -((108 :S 230)) -((64 :R 87) (137 :R 87)) -((35 :S 36) (64 :R 99)) -((64 :S 233)) -((6 :R 88) (9 :R 88) (11 :R 88) (27 :R 88) (53 :R 88) (84 :R 88)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((6 :R 89) (9 :R 89) (11 :R 89) (27 :R 89) (53 :R 89) (84 :R 89)) -((6 :R 90) (9 :R 90) (11 :R 90) (27 :R 90) (53 :R 90) (84 :R 90)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((6 :R 91) (9 :R 91) (11 :R 91) (27 :R 91) (53 :R 91) (84 :R 91)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241)) -((6 :R 92) (9 :R 92) (11 :R 92) (27 :R 92) (53 :R 92) (84 :R 92)) -((117 :R 98) (134 :S 246) (135 :S 247) (136 :S 248)) -((117 :S 245)) -((133 :S 244)) -((11 :R 93) (82 :R 93) (95 :R 93) (110 :R 93) (111 :R 93) (114 :R 93) (120 :R 93) (122 :R 93) (124 :R 93) (128 :R 93) (129 :R 93) (130 :R 93)) -((133 :R 94)) -((117 :R 95)) -((117 :R 96)) -((117 :R 97)) -((35 :S 36) (64 :R 99)) -((64 :R 100)) -((27 :S 227)) -((64 :R 102)) -((64 :R 104)) -((6 :R 105) (82 :S 144)) -((6 :R 106)) -((6 :R 107) (80 :S 140) (82 :R 107)) -((6 :R 108) (82 :R 108)) -((27 :S 282)) -((64 :R 110)) -((6 :R 111) (75 :S 124)) -((6 :R 112)) -((9 :R 114) (64 :R 114)) +((67 :S 228)) +((6 :R 95) (9 :R 95) (11 :R 95) (27 :R 95) (40 :R 95) (55 :R 95) (90 :R 95) (99 :R 95) (100 :R 95)) +((6 :R 104) (9 :R 104) (11 :R 104) (27 :R 104) (40 :R 104) (55 :R 104) (90 :R 104) (99 :R 104) (100 :R 104) (121 :S 238)) +((6 :R 96) (9 :R 96) (11 :R 96) (27 :R 96) (40 :R 96) (55 :R 96) (90 :R 96) (99 :R 96) (100 :R 96)) +((128 :S 232)) +((6 :R 97) (9 :R 97) (11 :R 97) (27 :R 97) (40 :R 97) (55 :R 97) (90 :R 97) (99 :R 97) (100 :R 97) (121 :R 97)) +((6 :R 98) (9 :R 98) (11 :R 98) (27 :R 98) (40 :R 98) (55 :R 98) (90 :R 98) (99 :R 98) (100 :R 98) (121 :R 98)) +((6 :R 99) (9 :R 99) (11 :R 99) (27 :R 99) (40 :R 99) (55 :R 99) (90 :R 99) (99 :R 99) (100 :R 99) (121 :R 99)) +((6 :R 100) (9 :R 100) (11 :R 100) (27 :R 100) (40 :R 100) (55 :R 100) (90 :R 100) (99 :R 100) (100 :R 100) (121 :R 100)) +((6 :R 101) (9 :R 101) (11 :R 101) (27 :R 101) (40 :R 101) (55 :R 101) (90 :R 101) (99 :R 101) (100 :R 101) (121 :R 101)) +((6 :R 102) (9 :R 102) (11 :R 102) (27 :R 102) (40 :R 102) (55 :R 102) (90 :R 102) (99 :R 102) (100 :R 102) (121 :R 102)) +((134 :S 239)) +((121 :S 240)) +((136 :S 328)) +((122 :S 242)) +((122 :S 243)) +((6 :R 103) (9 :R 103) (11 :R 103) (27 :R 103) (40 :R 103) (55 :R 103) (90 :R 103) (99 :R 103) (100 :R 103)) +((136 :S 245)) +((122 :R 105)) +((136 :S 247)) +((122 :R 106)) +((136 :S 319)) +((122 :S 250)) +((6 :R 108) (9 :R 108) (11 :R 108) (27 :R 108) (40 :R 108) (55 :R 108) (90 :R 108) (99 :R 108) (100 :R 108)) +((27 :S 262)) +((67 :S 253)) +((6 :R 109) (9 :R 109) (11 :R 109) (27 :R 109) (40 :R 109) (55 :R 109) (90 :R 109) (99 :R 109) (100 :R 109)) +((6 :R 111) (9 :R 111) (11 :R 111) (27 :R 111) (40 :R 111) (55 :R 111) (65 :R 111) (90 :R 111) (99 :R 111) (100 :R 111) (121 :R 111)) +((6 :R 112) (9 :R 112) (11 :R 112) (27 :R 112) (40 :R 112) (55 :R 112) (65 :R 112) (90 :R 112) (99 :R 112) (100 :R 112) (121 :R 112)) +((6 :R 113) (9 :R 113) (11 :R 113) (27 :R 113) (40 :R 113) (55 :R 113) (65 :R 113) (90 :R 113) (99 :R 113) (100 :R 113) (121 :R 113)) +((6 :R 114) (9 :R 114) (11 :R 114) (27 :R 114) (40 :R 114) (55 :R 114) (65 :R 114) (90 :R 114) (99 :R 114) (100 :R 114) (121 :R 114)) +((6 :R 115) (9 :R 115) (11 :R 115) (27 :R 115) (40 :R 115) (55 :R 115) (65 :R 115) (90 :R 115) (99 :R 115) (100 :R 115) (121 :R 115)) +((6 :R 116) (9 :R 116) (11 :R 116) (27 :R 116) (40 :R 116) (55 :R 116) (65 :R 116) (90 :R 116) (99 :R 116) (100 :R 116) (121 :R 116)) +((136 :S 261)) +((122 :R 118) (137 :R 118)) +((121 :S 263)) +((136 :S 264)) +((122 :S 265)) +((67 :R 119) (163 :R 119)) +((35 :S 36) (67 :R 131)) +((67 :S 268)) +((6 :R 120) (9 :R 120) (11 :R 120) (27 :R 120) (40 :R 120) (55 :R 120) (90 :R 120) (99 :R 120) (100 :R 120)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((6 :R 121) (9 :R 121) (11 :R 121) (27 :R 121) (40 :R 121) (55 :R 121) (90 :R 121) (99 :R 121) (100 :R 121)) +((6 :R 122) (9 :R 122) (11 :R 122) (27 :R 122) (40 :R 122) (55 :R 122) (90 :R 122) (99 :R 122) (100 :R 122)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((6 :R 123) (9 :R 123) (11 :R 123) (27 :R 123) (40 :R 123) (55 :R 123) (90 :R 123) (99 :R 123) (100 :R 123)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)) +((6 :R 124) (9 :R 124) (11 :R 124) (27 :R 124) (40 :R 124) (55 :R 124) (90 :R 124) (99 :R 124) (100 :R 124)) +((136 :R 130) (160 :S 281) (161 :S 282) (162 :S 283)) +((136 :S 280)) +((159 :S 279)) +((11 :R 125) (95 :R 125) (111 :R 125) (124 :R 125) (127 :R 125) (129 :R 125) (130 :R 125) (131 :R 125) (132 :R 125) (133 :R 125) (142 :R 125) (143 :R 125) (144 :R 125) (145 :R 125) (146 :R 125) (147 :R 125) (150 :R 125) (154 :R 125) (155 :R 125) (156 :R 125)) +((159 :R 126)) +((136 :R 127)) +((136 :R 128)) +((136 :R 129)) +((35 :S 36) (67 :R 131)) +((67 :R 132)) +((27 :S 262)) +((67 :R 134)) +((136 :S 319)) +((122 :R 136)) +((67 :R 138)) +((27 :S 292)) +((67 :R 139) (163 :S 291)) +((67 :R 140)) +((67 :R 139) (163 :S 291)) +((67 :R 142)) +((27 :S 139) (83 :S 137)) +((67 :R 144)) +((6 :R 145) (69 :R 145) (94 :S 166) (95 :S 170)) +((6 :R 146) (69 :R 146)) +((27 :S 325)) +((67 :R 148)) +((6 :R 149) (78 :S 127)) +((6 :R 150)) +((9 :R 152) (67 :R 152)) ((11 :S 25) (27 :S 26)) -((25 :R 116)) -((11 :S 25) (17 :R 117) (27 :S 26)) -((17 :R 118)) +((25 :R 154)) +((11 :S 25) (17 :R 155) (27 :S 26)) +((17 :R 156)) ((11 :S 25) (27 :S 26)) -((17 :R 119) (137 :S 267)) -((17 :R 120)) -((17 :R 119) (137 :S 267)) -((17 :R 122)) -((9 :R 123) (11 :S 275) (27 :S 287)) -((9 :R 124)) -((11 :S 25) (17 :R 121) (18 :S 15) (27 :S 26)) +((17 :R 157) (163 :S 309)) +((17 :R 158)) +((17 :R 157) (163 :S 309)) +((17 :R 160)) +((9 :R 161) (11 :S 317) (27 :S 331)) +((9 :R 162)) +((11 :S 25) (17 :R 159) (18 :S 15) (27 :S 26)) ((6 :S 29) (32 :S 31)) -((27 :R 73) (64 :R 73) (107 :S 191) (109 :R 73)) -((62 :S 219) (107 :S 214)) -((6 :R 86) (9 :R 86) (11 :R 86) (27 :R 86) (53 :R 86) (84 :R 86) (107 :S 222)) -((62 :S 231) (126 :S 234)) -((64 :R 101) (137 :S 251)) -((27 :S 276) (64 :R 103) (109 :S 194)) -((64 :R 109) (137 :S 258)) -((9 :R 113) (35 :S 36) (64 :R 113)) -((25 :R 115) (137 :S 263)) -((108 :R 82) (118 :S 210) (119 :S 212)) -((11 :S 167) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (128 :S 237) (129 :S 239) (130 :S 241)) -((11 :S 167) (37 :S 40) (43 :S 47) (51 :S 59) (58 :S 73) (60 :S 81) (65 :S 92) (70 :S 106) (82 :S 181) (95 :S 168) (110 :S 195) (111 :S 199) (114 :S 202) (120 :S 277) (122 :S 278) (124 :S 279) (130 :S 241))) +((27 :R 93) (67 :R 93) (121 :S 221) (123 :R 93)) +((122 :R 117) (137 :R 117) (138 :S 260)) +((65 :S 266) (152 :S 269)) +((67 :R 133) (163 :S 286)) +((122 :R 135) (137 :S 288)) +((27 :S 318) (67 :R 137) (123 :S 224)) +((67 :R 143) (163 :S 296)) +((67 :R 147) (163 :S 300)) +((9 :R 151) (35 :S 36) (67 :R 151)) +((25 :R 153) (163 :S 305)) +((122 :R 107) (137 :S 244) (138 :S 246)) +((6 :R 110) (9 :R 110) (11 :R 110) (27 :R 110) (40 :R 110) (55 :R 110) (65 :S 251) (90 :R 110) (99 :R 110) (100 :R 110) (121 :S 248)) +((11 :S 197) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (154 :S 272) (155 :S 274) (156 :S 276)) +((11 :S 197) (37 :S 40) (44 :S 48) (52 :S 60) (61 :S 76) (63 :S 84) (68 :S 95) (73 :S 109) (95 :S 211) (111 :S 198) (124 :S 225) (127 :S 231) (129 :S 233) (130 :S 234) (131 :S 235) (132 :S 236) (133 :S 237) (142 :S 254) (143 :S 255) (144 :S 256) (145 :S 257) (146 :S 258) (147 :S 259) (150 :S 320) (156 :S 276)))

-#288( +#332( ((3 . 1)(4 . 2)(10 . 8)) () () @@ -309,14 +353,14 @@ () () ((13 . 11)) -((14 . 12)(28 . 272)(29 . 27)(30 . 28)) +((14 . 12)(28 . 314)(29 . 27)(30 . 28)) () () () () () () -((19 . 284)(20 . 17)(22 . 19)(23 . 265)(24 . 21)) +((19 . 327)(20 . 17)(22 . 19)(23 . 307)(24 . 21)) () () () @@ -327,93 +371,131 @@ () () () -((31 . 30)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) +((31 . 30)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () () () -((33 . 34)(34 . 283)) +((33 . 34)(34 . 326)) () () () () -((36 . 39)(42 . 184)(101 . 183)) +((36 . 39)(43 . 214)(116 . 213)) () () ((39 . 42)) () ((41 . 44)) +((42 . 45)) () -((42 . 46)) +((43 . 47)) () () -((45 . 49)) +((46 . 50)) () -((47 . 51)) +((48 . 52)) () -((49 . 53)) +((50 . 54)) () -((41 . 55)) -((50 . 56)(74 . 260)) +((41 . 56)) +((51 . 57)(77 . 302)) () -((42 . 58)) +((43 . 59)) () () -((31 . 61)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) -() +((31 . 62)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) ((54 . 63)) () -((39 . 65)) +((56 . 65)) +() +((39 . 67)) () -((41 . 67)) -((55 . 68)) -((56 . 69)) +((41 . 69)) ((57 . 70)) +((58 . 71)) +((59 . 72)) +((60 . 73)) +() +((43 . 75)) +() +((62 . 77)) +() +((39 . 79)) +() +((41 . 81)) +() +((43 . 83)) +() +() +() +((66 . 87)) +() +() +((39 . 90)) +() +((41 . 92)) +() +((43 . 94)) +() +() +((39 . 97)) +() +((41 . 99)) +() +() +() +((66 . 103)) +() +((71 . 105)(91 . 298)(92 . 158)(93 . 159)) +((72 . 106)) +() +((43 . 108)) +() +() +() +((66 . 112)) +() +() +((39 . 115)) +() +((41 . 117)) +() +((43 . 119)) +() +() +() +() +() () -((42 . 72)) () -((59 . 74)) () -((39 . 76)) () -((41 . 78)) () -((42 . 80)) () () () -((63 . 84)) () () -((39 . 87)) +((81 . 135)(82 . 324)) () -((41 . 89)) () -((42 . 91)) () () -((39 . 94)) () -((41 . 96)) () () () -((63 . 100)) () -((68 . 102)(79 . 256)) -((69 . 103)(81 . 254)) () -((42 . 105)) +((86 . 146)(88 . 150)(118 . 218)(119 . 219)(120 . 220)) () () () -((63 . 109)) () () -((39 . 112)) +((89 . 152)) () -((41 . 114)) () -((42 . 116)) () () () @@ -423,91 +505,95 @@ () () () +((66 . 164)) () () () () -((63 . 130)) +((41 . 169)) () () +((96 . 172)) +((97 . 173)) +((98 . 174)) () +((41 . 176)) () +((31 . 178)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () +((31 . 180)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () +((75 . 182)) () () +((66 . 185)) () () () () -((41 . 143)) () () -((83 . 146)) () -((72 . 148)) () -((41 . 150)) () -((31 . 152)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) () () -((63 . 155)) () () +((112 . 199)) () () () () +((113 . 204)) () +((31 . 206)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () () () () () () -((96 . 169)) () () () +((88 . 323)(117 . 216)(118 . 218)(119 . 219)(120 . 220)) () -((97 . 174)) () -((31 . 176)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) () () () +((120 . 222)) () () () () +((33 . 227)(34 . 326)) () () -((102 . 186)(103 . 281)(104 . 188)(105 . 189)(106 . 190)) +((126 . 230)) () () () () () -((106 . 192)) () () () () -((33 . 197)(34 . 283)) () +((135 . 241)) () () -((113 . 201)) () -((113 . 203)) () () () -((116 . 207)) () +((140 . 249)(148 . 322)) () () +((141 . 252)(149 . 321)) () () () @@ -517,93 +603,95 @@ () () () -((121 . 220)(123 . 280)) () () () () () +((34 . 284)(151 . 267)) () () +((31 . 270)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () () +((31 . 273)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () +((31 . 275)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) () -((34 . 249)(125 . 232)) +((157 . 277)) +((158 . 278)) () () -((31 . 235)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) () () -((31 . 238)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) () -((31 . 240)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) () -((131 . 242)) -((132 . 243)) +((34 . 284)(151 . 285)) () +((141 . 287)(149 . 321)) () +((140 . 289)(148 . 322)) () () () +((164 . 293)) () -((34 . 249)(125 . 250)) +((164 . 295)) () -((121 . 252)(123 . 280)) +((81 . 297)(82 . 324)) () +((71 . 299)(91 . 298)(92 . 158)(93 . 159)) () -((69 . 255)(81 . 254)) +((66 . 301)) () -((68 . 257)(79 . 256)) +((51 . 303)(77 . 302)) () -((63 . 259)) () -((50 . 261)(74 . 260)) +((19 . 327)(20 . 17)(24 . 306)) () +((19 . 327)(20 . 17)(22 . 308)(23 . 307)(24 . 21)) () -((19 . 284)(20 . 17)(24 . 264)) +((19 . 310)(20 . 17)) +((165 . 311)) () -((19 . 284)(20 . 17)(22 . 266)(23 . 265)(24 . 21)) +((165 . 313)) () -((19 . 268)(20 . 17)) -((138 . 269)) +((14 . 315)(28 . 314)(29 . 27)(30 . 28)) () -((138 . 271)) +((16 . 13)(19 . 312)(20 . 17)) () -((14 . 273)(28 . 272)(29 . 27)(30 . 28)) () -((16 . 13)(19 . 270)(20 . 17)) () () () () +((88 . 323)(117 . 290)(118 . 218)(119 . 219)(120 . 220)) () () -((102 . 253)(103 . 281)(104 . 188)(105 . 189)(106 . 190)) +((33 . 304)(34 . 326)) () -((33 . 262)(34 . 283)) () () -((31 . 236)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286)) -((31 . 37)(85 . 157)(86 . 158)(87 . 159)(88 . 160)(89 . 161)(90 . 162)(91 . 163)(92 . 164)(93 . 165)(94 . 166)(127 . 286))) +((31 . 271)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330)) +((31 . 37)(101 . 187)(102 . 188)(103 . 189)(104 . 190)(105 . 191)(106 . 192)(107 . 193)(108 . 194)(109 . 195)(110 . 196)(125 . 229)(139 . 329)(153 . 330))) 0

2

-#68((MODULE-DEFINITION . #S(ZEBU::ZB-RULE :-NAME MODULE-DEFINITION :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-IDENTIFIER "DEFINITIONS" "::=" "BEGIN" MODULE-BODY "END") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE MODULE-DEFINITION :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL IDENTIFIER :-VALUE MODULE-IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL BODY :-VALUE MODULE-BODY))) :-BUILD-FN MODULE-DEFINITION1109)))) +#83((MODULE-DEFINITION . #S(ZEBU::ZB-RULE :-NAME MODULE-DEFINITION :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-IDENTIFIER "DEFINITIONS" "::=" "BEGIN" MODULE-BODY "END") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE MODULE-DEFINITION :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL IDENTIFIER :-VALUE MODULE-IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL BODY :-VALUE MODULE-BODY))) :-BUILD-FN MODULE-DEFINITION1206)))) (MODULE-IDENTIFIER . #S(ZEBU::ZB-RULE :-NAME MODULE-IDENTIFIER :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-REFERENCE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (MODULE-REFERENCE . #S(ZEBU::ZB-RULE :-NAME MODULE-REFERENCE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-REFERENCE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(MODULE-BODY . #S(ZEBU::ZB-RULE :-NAME MODULE-BODY :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (EXPORTS IMPORTS ASSIGNMENT*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE MODULE-BODY :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL ASSIGNMENT-LIST :-VALUE ASSIGNMENT*) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL EXPORTS :-VALUE EXPORTS) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL IMPORTS :-VALUE IMPORTS))) :-BUILD-FN MODULE-BODY1108) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(EXPORTS . #S(ZEBU::ZB-RULE :-NAME EXPORTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("EXPORTS" SYMBOL*,1$ ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE EXPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL LIST :-VALUE SYMBOL*,1$))) :-BUILD-FN EXPORTS1106) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("EXPORTS" "ALL" ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE EXPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL ALL-EXPORTS :-VALUE T))) :-BUILD-FN EXPORTS1107) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(MODULE-BODY . #S(ZEBU::ZB-RULE :-NAME MODULE-BODY :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (EXPORTS IMPORTS ASSIGNMENT*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE MODULE-BODY :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL ASSIGNMENT-LIST :-VALUE ASSIGNMENT*) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL EXPORTS :-VALUE EXPORTS) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL IMPORTS :-VALUE IMPORTS))) :-BUILD-FN MODULE-BODY1205) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(EXPORTS . #S(ZEBU::ZB-RULE :-NAME EXPORTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("EXPORTS" SYMBOL*,1$ ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE EXPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL LIST :-VALUE SYMBOL*,1$))) :-BUILD-FN EXPORTS1203) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("EXPORTS" "ALL" ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE EXPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL ALL-EXPORTS :-VALUE T))) :-BUILD-FN EXPORTS1204) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (SYMBOL . #S(ZEBU::ZB-RULE :-NAME SYMBOL :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (REFERENCE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(IMPORTS . #S(ZEBU::ZB-RULE :-NAME IMPORTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("IMPORTS" SYMBOLS-FROM-MODULE* ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE IMPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALID :-VALUE T) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL LIST :-VALUE SYMBOLS-FROM-MODULE*))) :-BUILD-FN IMPORTS1105) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(SYMBOLS-FROM-MODULE . #S(ZEBU::ZB-RULE :-NAME SYMBOLS-FROM-MODULE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL+,1$ "FROM" GLOBAL-MODULE-REFERENCE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE SYMBOLS-FROM-MODULE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL SYMBOLS :-VALUE SYMBOL+,1$) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL GLOBAL-MODULE-REFERENCE :-VALUE GLOBAL-MODULE-REFERENCE))) :-BUILD-FN SYMBOLS-FROM-MODULE1104)))) +(IMPORTS . #S(ZEBU::ZB-RULE :-NAME IMPORTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("IMPORTS" SYMBOLS-FROM-MODULE* ";") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE IMPORTS :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALID :-VALUE T) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL LIST :-VALUE SYMBOLS-FROM-MODULE*))) :-BUILD-FN IMPORTS1202) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(SYMBOLS-FROM-MODULE . #S(ZEBU::ZB-RULE :-NAME SYMBOLS-FROM-MODULE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL+,1$ "FROM" GLOBAL-MODULE-REFERENCE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE SYMBOLS-FROM-MODULE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL SYMBOLS :-VALUE SYMBOL+,1$) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL GLOBAL-MODULE-REFERENCE :-VALUE GLOBAL-MODULE-REFERENCE))) :-BUILD-FN SYMBOLS-FROM-MODULE1201)))) (GLOBAL-MODULE-REFERENCE . #S(ZEBU::ZB-RULE :-NAME GLOBAL-MODULE-REFERENCE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-REFERENCE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (REFERENCE . #S(ZEBU::ZB-RULE :-NAME REFERENCE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-REFERENCE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(ASSIGNMENT . #S(ZEBU::ZB-RULE :-NAME ASSIGNMENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-ASSIGNMENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE TYPE-ASSIGNMENT))) :-BUILD-FN ASSIGNMENT1102) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (VALUE-ASSIGNMENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :VALUE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE VALUE-ASSIGNMENT))) :-BUILD-FN ASSIGNMENT1103)))) +(ASSIGNMENT . #S(ZEBU::ZB-RULE :-NAME ASSIGNMENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-ASSIGNMENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE TYPE-ASSIGNMENT))) :-BUILD-FN ASSIGNMENT1199) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (VALUE-ASSIGNMENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :VALUE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE VALUE-ASSIGNMENT))) :-BUILD-FN ASSIGNMENT1200)))) (TYPE-ASSIGNMENT . #S(ZEBU::ZB-RULE :-NAME TYPE-ASSIGNMENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-REFERENCE "::=" TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (TYPE-REFERENCE "MACRO" "::=" "BEGIN" GARBAGE+ "END") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (GARBAGE . #S(ZEBU::ZB-RULE :-NAME GARBAGE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (ANYTHING) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(VALUE-ASSIGNMENT . #S(ZEBU::ZB-RULE :-NAME VALUE-ASSIGNMENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER TYPE "::=" VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1094) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-IDENTITY" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-IDENTITY) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1095) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "MODULE-IDENTITY" "LAST-UPDATED" LAST-UPDATED "ORGANIZATION" ORGANIZATION "CONTACT-INFO" CONTACT-INFO "DESCRIPTION" DESCRIPTION MODULE-REVISION* "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :MODULE-IDENTITY) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1096) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-TYPE" "SYNTAX" TYPE "MAX-ACCESS" MAX-ACCESS "STATUS" STATUS "DESCRIPTION" DESCRIPTION OBJECT-TYPE-INDEX OBJECT-TYPE-AUGMENTS OBJECT-TYPE-DEFVAL "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1097) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "NOTIFICATION-TYPE" NOTIFICATION-TYPE-OBJECTS "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :NOTIFICATION-TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1098) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "NOTIFICATION-GROUP" "NOTIFICATIONS" "{" IDENTIFIER+,1$ "}" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :NOTIFICATION-GROUP) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1099) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "MODULE-COMPLIANCE" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "MODULE" "MANDATORY-GROUPS" "{" IDENTIFIER+,1$ "}" MODULE-COMPLIANCE-GROUP* MODULE-COMPLIANCE-OBJECT* "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :MODULE-COMPLIANCE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1100) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-GROUP" "OBJECTS" "{" IDENTIFIER+,1$ "}" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-GROUP) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1101)))) +(VALUE-ASSIGNMENT . #S(ZEBU::ZB-RULE :-NAME VALUE-ASSIGNMENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER TYPE "::=" VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1191) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-IDENTITY" "STATUS" STATUS "DESCRIPTION" DESCRIPTION OBJECT-IDENTITY-REFERENCE "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-IDENTITY) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1192) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "MODULE-IDENTITY" "LAST-UPDATED" LAST-UPDATED "ORGANIZATION" ORGANIZATION "CONTACT-INFO" CONTACT-INFO "DESCRIPTION" DESCRIPTION MODULE-REVISION* "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :MODULE-IDENTITY) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1193) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-TYPE" "SYNTAX" TYPE OBJECT-TYPE-UNITS "MAX-ACCESS" MAX-ACCESS "STATUS" STATUS "DESCRIPTION" DESCRIPTION OBJECT-TYPE-INDEX OBJECT-TYPE-AUGMENTS OBJECT-TYPE-REFERENCE OBJECT-TYPE-DEFVAL "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1194) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "NOTIFICATION-TYPE" NOTIFICATION-TYPE-OBJECTS "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :NOTIFICATION-TYPE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1195) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "NOTIFICATION-GROUP" "NOTIFICATIONS" "{" IDENTIFIER+,1$ "}" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :NOTIFICATION-GROUP) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1196) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "MODULE-COMPLIANCE" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "MODULE" "MANDATORY-GROUPS" "{" IDENTIFIER+,1$ "}" MODULE-COMPLIANCE-BODY* MODULE-COMPLIANCE-OTHER "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :MODULE-COMPLIANCE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1197) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "OBJECT-GROUP" "OBJECTS" "{" IDENTIFIER+,1$ "}" "STATUS" STATUS "DESCRIPTION" DESCRIPTION "::=" OBJECT-IDENTIFIER-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE VALUE-ASSIGNMENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL TYPE :-VALUE :OBJECT-GROUP) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJECT-IDENTIFIER-VALUE))) :-BUILD-FN VALUE-ASSIGNMENT1198)))) (STATUS . #S(ZEBU::ZB-RULE :-NAME STATUS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (MAX-ACCESS . #S(ZEBU::ZB-RULE :-NAME MAX-ACCESS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (MIN-ACCESS . #S(ZEBU::ZB-RULE :-NAME MIN-ACCESS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) @@ -612,12 +700,21 @@ (ORGANIZATION . #S(ZEBU::ZB-RULE :-NAME ORGANIZATION :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (CONTACT-INFO . #S(ZEBU::ZB-RULE :-NAME CONTACT-INFO :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (MODULE-REVISION . #S(ZEBU::ZB-RULE :-NAME MODULE-REVISION :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("REVISION" STRING "DESCRIPTION" STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(OBJECT-TYPE-INDEX . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-INDEX :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("INDEX" "{" IDENTIFIER+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-IDENTITY-REFERENCE . #S(ZEBU::ZB-RULE :-NAME OBJECT-IDENTITY-REFERENCE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("REFERENCE" STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-INDEX . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-INDEX :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("INDEX" "{" OBJECT-TYPE-INDEX-VALUE+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-INDEX-VALUE . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-INDEX-VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("IMPLIED" IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (OBJECT-TYPE-AUGMENTS . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-AUGMENTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("AUGMENTS" "{" IDENTIFIER "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(OBJECT-TYPE-DEFVAL . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-DEFVAL :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("DEFVAL" "{" IDENTIFIER "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-DEFVAL . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-DEFVAL :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("DEFVAL" "{" OBJECT-TYPE-DEFVAL-VALUE "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-DEFVAL-VALUE . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-DEFVAL-VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (HSTRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJ-ID-COMPONENT) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("{" IDENTIFIER*,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-UNITS . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-UNITS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("UNITS" STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(OBJECT-TYPE-REFERENCE . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-REFERENCE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("REFERENCE" STRING) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(MODULE-COMPLIANCE-BODY . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-BODY :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-COMPLIANCE-GROUP) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-COMPLIANCE-OBJECT) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) +(MODULE-COMPLIANCE-OTHER . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OTHER :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("MODULE" TYPE-REFERENCE "MANDATORY-GROUPS" "{" IDENTIFIER+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (MODULE-COMPLIANCE-GROUP . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-GROUP :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("GROUP" IDENTIFIER "DESCRIPTION" DESCRIPTION) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(MODULE-COMPLIANCE-OBJECT . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OBJECT" IDENTIFIER MODULE-COMPLIANCE-OBJECT-SYNTAX "MIN-ACCESS" MIN-ACCESS "DESCRIPTION" DESCRIPTION) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(MODULE-COMPLIANCE-OBJECT . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OBJECT" IDENTIFIER MODULE-COMPLIANCE-OBJECT-SYNTAX MODULE-COMPLIANCE-OBJECT-WRITE-SYNTAX MODULE-COMPLIANCE-OBJECT-ACCESS "DESCRIPTION" DESCRIPTION) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (MODULE-COMPLIANCE-OBJECT-SYNTAX . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT-SYNTAX :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("SYNTAX" TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(MODULE-COMPLIANCE-OBJECT-WRITE-SYNTAX . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT-WRITE-SYNTAX :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("WRITE-SYNTAX" TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(MODULE-COMPLIANCE-OBJECT-ACCESS . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT-ACCESS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("MIN-ACCESS" MIN-ACCESS) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (NOTIFICATION-TYPE-OBJECTS . #S(ZEBU::ZB-RULE :-NAME NOTIFICATION-TYPE-OBJECTS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OBJECTS" "{" IDENTIFIER+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (TYPE . #S(ZEBU::ZB-RULE :-NAME TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (BUILTIN-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAMED-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (BUILTIN-TYPE . #S(ZEBU::ZB-RULE :-NAME BUILTIN-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJECT-IDENTIFIER-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (CHOICE-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (STRING-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (INTEGER-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SEQUENCE-OF-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SEQUENCE-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (TEXTUAL-CONVENTION-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (TAGGED-TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) @@ -628,16 +725,19 @@ (OBJECT-IDENTIFIER-TYPE . #S(ZEBU::ZB-RULE :-NAME OBJECT-IDENTIFIER-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OBJECT" "IDENTIFIER") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (VALUE . #S(ZEBU::ZB-RULE :-NAME VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (BUILTIN-VALUE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (BUILTIN-VALUE . #S(ZEBU::ZB-RULE :-NAME BUILTIN-VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJECT-IDENTIFIER-VALUE) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(OBJECT-IDENTIFIER-VALUE . #S(ZEBU::ZB-RULE :-NAME OBJECT-IDENTIFIER-VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("{" OBJ-ID-COMPONENT+ "}") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE OBJECT-IDENTIFIER-VALUE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJ-ID-COMPONENT+))) :-BUILD-FN OBJECT-IDENTIFIER-VALUE1093)))) +(OBJECT-IDENTIFIER-VALUE . #S(ZEBU::ZB-RULE :-NAME OBJECT-IDENTIFIER-VALUE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("{" OBJ-ID-COMPONENT+ "}") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE OBJECT-IDENTIFIER-VALUE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE OBJ-ID-COMPONENT+))) :-BUILD-FN OBJECT-IDENTIFIER-VALUE1190)))) (OBJ-ID-COMPONENT . #S(ZEBU::ZB-RULE :-NAME OBJ-ID-COMPONENT :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAME-AND-NUMBER-FORM) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAME-FORM) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (NUMBER-FORM) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(NAME-AND-NUMBER-FORM . #S(ZEBU::ZB-RULE :-NAME NAME-AND-NUMBER-FORM :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "(" NUMBER-FORM ")") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE OBJ-ID-COMPONENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE NUMBER-FORM))) :-BUILD-FN NAME-AND-NUMBER-FORM1092)))) +(NAME-AND-NUMBER-FORM . #S(ZEBU::ZB-RULE :-NAME NAME-AND-NUMBER-FORM :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "(" NUMBER-FORM ")") :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE OBJ-ID-COMPONENT :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL NAME :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL VALUE :-VALUE NUMBER-FORM))) :-BUILD-FN NAME-AND-NUMBER-FORM1189)))) (NAME-FORM . #S(ZEBU::ZB-RULE :-NAME NAME-FORM :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (NUMBER-FORM . #S(ZEBU::ZB-RULE :-NAME NUMBER-FORM :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (CHOICE-TYPE . #S(ZEBU::ZB-RULE :-NAME CHOICE-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("CHOICE" "{" GARBAGE+ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(STRING-TYPE . #S(ZEBU::ZB-RULE :-NAME STRING-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OCTET" "STRING" STRING-OPTIONS) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("DisplayString" STRING-OPTIONS) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(STRING-TYPE . #S(ZEBU::ZB-RULE :-NAME STRING-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (STRING-TYPE-NAME STRING-OPTIONS) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) +(STRING-TYPE-NAME . #S(ZEBU::ZB-RULE :-NAME STRING-TYPE-NAME :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("OCTET" "STRING") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("DisplayString") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("PhysAddress") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("SnmpAdminString") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("DateAndTime") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("InternationalDisplayString") :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (STRING-OPTIONS . #S(ZEBU::ZB-RULE :-NAME STRING-OPTIONS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("(" "SIZE" "(" NUMBERS ")" ")") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (NUMBERS . #S(ZEBU::ZB-RULE :-NAME NUMBERS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER "|" SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER ".." SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) -(INTEGER-TYPE . #S(ZEBU::ZB-RULE :-NAME INTEGER-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("INTEGER" "(" SIGNED-NUMBER ".." SIGNED-NUMBER ")") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("INTEGER" "{" NAMED-NUMBER+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("Integer32" "(" SIGNED-NUMBER ".." SIGNED-NUMBER ")") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("Integer32") :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) +(INTEGER-TYPE . #S(ZEBU::ZB-RULE :-NAME INTEGER-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (INTEGER-TYPE-NAME "(" SPLITED-NUMBERS+|1$ ")") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (INTEGER-TYPE-NAME "{" NAMED-NUMBER+,1$ "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (INTEGER-TYPE-NAME) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) +(INTEGER-TYPE-NAME . #S(ZEBU::ZB-RULE :-NAME INTEGER-TYPE-NAME :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("INTEGER") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("Integer32") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("Unsigned32") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("RowStatus") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("SnmpSecurityModel") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("BITS") :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) +(SPLITED-NUMBERS . #S(ZEBU::ZB-RULE :-NAME SPLITED-NUMBERS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER ".." SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (NAMED-NUMBER . #S(ZEBU::ZB-RULE :-NAME NAMED-NUMBER :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "(" SIGNED-NUMBER ")") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (SEQUENCE-TYPE . #S(ZEBU::ZB-RULE :-NAME SEQUENCE-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("SEQUENCE" "{" GARBAGE* "}") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (SEQUENCE-OF-TYPE . #S(ZEBU::ZB-RULE :-NAME SEQUENCE-OF-TYPE :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("SEQUENCE" "OF" TYPE) :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) @@ -645,17 +745,20 @@ (TAG . #S(ZEBU::ZB-RULE :-NAME TAG :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("[" CLASS CLASS-NUMBER "]") :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) (CLASS-NUMBER . #S(ZEBU::ZB-RULE :-NAME CLASS-NUMBER :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SIGNED-NUMBER) :-SEMANTICS NIL :-BUILD-FN IDENTITY)))) (CLASS . #S(ZEBU::ZB-RULE :-NAME CLASS :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX ("UNIVERSAL") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("APPLICATION") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("PRIVATE") :-SEMANTICS NIL :-BUILD-FN IDENTITY) #S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*)))) -(GARBAGE* . #S(ZEBU::ZB-RULE :-NAME GARBAGE* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE GARBAGE*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE GARBAGE*))) :-BUILD-FN GARBAGE*1091)))) -(NAMED-NUMBER+,1$ . #S(ZEBU::ZB-RULE :-NAME NAMED-NUMBER+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAMED-NUMBER) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE NAMED-NUMBER))) :-BUILD-FN NAMED-NUMBER+,1$1089) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAMED-NUMBER "," NAMED-NUMBER+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE NAMED-NUMBER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE NAMED-NUMBER+,1$))) :-BUILD-FN NAMED-NUMBER+,1$1090)))) -(OBJ-ID-COMPONENT+ . #S(ZEBU::ZB-RULE :-NAME OBJ-ID-COMPONENT+ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJ-ID-COMPONENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJ-ID-COMPONENT))) :-BUILD-FN OBJ-ID-COMPONENT+1087) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJ-ID-COMPONENT OBJ-ID-COMPONENT+) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJ-ID-COMPONENT) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE OBJ-ID-COMPONENT+))) :-BUILD-FN OBJ-ID-COMPONENT+1088)))) -(MODULE-COMPLIANCE-OBJECT* . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-OBJECT* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-COMPLIANCE-OBJECT MODULE-COMPLIANCE-OBJECT*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE MODULE-COMPLIANCE-OBJECT) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE MODULE-COMPLIANCE-OBJECT*))) :-BUILD-FN MODULE-COMPLIANCE-OBJECT*1086)))) -(MODULE-COMPLIANCE-GROUP* . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-GROUP* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-COMPLIANCE-GROUP MODULE-COMPLIANCE-GROUP*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE MODULE-COMPLIANCE-GROUP) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE MODULE-COMPLIANCE-GROUP*))) :-BUILD-FN MODULE-COMPLIANCE-GROUP*1085)))) -(IDENTIFIER+,1$ . #S(ZEBU::ZB-RULE :-NAME IDENTIFIER+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER))) :-BUILD-FN IDENTIFIER+,1$1083) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "," IDENTIFIER+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE IDENTIFIER+,1$))) :-BUILD-FN IDENTIFIER+,1$1084)))) -(MODULE-REVISION* . #S(ZEBU::ZB-RULE :-NAME MODULE-REVISION* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-REVISION MODULE-REVISION*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE MODULE-REVISION) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE MODULE-REVISION*))) :-BUILD-FN MODULE-REVISION*1082)))) -(GARBAGE+ . #S(ZEBU::ZB-RULE :-NAME GARBAGE+ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE))) :-BUILD-FN GARBAGE+1080) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE GARBAGE+) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE GARBAGE+))) :-BUILD-FN GARBAGE+1081)))) -(SYMBOL+,1$ . #S(ZEBU::ZB-RULE :-NAME SYMBOL+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL))) :-BUILD-FN SYMBOL+,1$1078) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL "," SYMBOL+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE SYMBOL+,1$))) :-BUILD-FN SYMBOL+,1$1079)))) -(SYMBOLS-FROM-MODULE* . #S(ZEBU::ZB-RULE :-NAME SYMBOLS-FROM-MODULE* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOLS-FROM-MODULE SYMBOLS-FROM-MODULE*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOLS-FROM-MODULE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE SYMBOLS-FROM-MODULE*))) :-BUILD-FN SYMBOLS-FROM-MODULE*1077)))) -(|Rest-SYMBOL*,1$| . #S(ZEBU::ZB-RULE :-NAME |Rest-SYMBOL*,1$| :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("," SYMBOL |Rest-SYMBOL*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-SYMBOL*,1$|))) :-BUILD-FN |Rest-SYMBOL*,1$1076|)))) -(SYMBOL*,1$ . #S(ZEBU::ZB-RULE :-NAME SYMBOL*,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL |Rest-SYMBOL*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-SYMBOL*,1$|))) :-BUILD-FN SYMBOL*,1$1075)))) -(ASSIGNMENT* . #S(ZEBU::ZB-RULE :-NAME ASSIGNMENT* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (ASSIGNMENT ASSIGNMENT*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE ASSIGNMENT) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE ASSIGNMENT*))) :-BUILD-FN ASSIGNMENT*1074)))) +(GARBAGE* . #S(ZEBU::ZB-RULE :-NAME GARBAGE* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE GARBAGE*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE GARBAGE*))) :-BUILD-FN GARBAGE*1188)))) +(NAMED-NUMBER+,1$ . #S(ZEBU::ZB-RULE :-NAME NAMED-NUMBER+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAMED-NUMBER) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE NAMED-NUMBER))) :-BUILD-FN NAMED-NUMBER+,1$1186) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (NAMED-NUMBER "," NAMED-NUMBER+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE NAMED-NUMBER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE NAMED-NUMBER+,1$))) :-BUILD-FN NAMED-NUMBER+,1$1187)))) +(SPLITED-NUMBERS+|1$ . #S(ZEBU::ZB-RULE :-NAME SPLITED-NUMBERS+|1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SPLITED-NUMBERS) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SPLITED-NUMBERS))) :-BUILD-FN SPLITED-NUMBERS+|1$1184) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SPLITED-NUMBERS "|" SPLITED-NUMBERS+|1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SPLITED-NUMBERS) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE SPLITED-NUMBERS+|1$))) :-BUILD-FN SPLITED-NUMBERS+|1$1185)))) +(OBJ-ID-COMPONENT+ . #S(ZEBU::ZB-RULE :-NAME OBJ-ID-COMPONENT+ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJ-ID-COMPONENT) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJ-ID-COMPONENT))) :-BUILD-FN OBJ-ID-COMPONENT+1182) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJ-ID-COMPONENT OBJ-ID-COMPONENT+) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJ-ID-COMPONENT) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE OBJ-ID-COMPONENT+))) :-BUILD-FN OBJ-ID-COMPONENT+1183)))) +(|Rest-IDENTIFIER*,1$| . #S(ZEBU::ZB-RULE :-NAME |Rest-IDENTIFIER*,1$| :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("," IDENTIFIER |Rest-IDENTIFIER*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-IDENTIFIER*,1$|))) :-BUILD-FN |Rest-IDENTIFIER*,1$1181|)))) +(IDENTIFIER*,1$ . #S(ZEBU::ZB-RULE :-NAME IDENTIFIER*,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER |Rest-IDENTIFIER*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-IDENTIFIER*,1$|))) :-BUILD-FN IDENTIFIER*,1$1180)))) +(OBJECT-TYPE-INDEX-VALUE+,1$ . #S(ZEBU::ZB-RULE :-NAME OBJECT-TYPE-INDEX-VALUE+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJECT-TYPE-INDEX-VALUE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJECT-TYPE-INDEX-VALUE))) :-BUILD-FN OBJECT-TYPE-INDEX-VALUE+,1$1178) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (OBJECT-TYPE-INDEX-VALUE "," OBJECT-TYPE-INDEX-VALUE+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE OBJECT-TYPE-INDEX-VALUE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE OBJECT-TYPE-INDEX-VALUE+,1$))) :-BUILD-FN OBJECT-TYPE-INDEX-VALUE+,1$1179)))) +(MODULE-COMPLIANCE-BODY* . #S(ZEBU::ZB-RULE :-NAME MODULE-COMPLIANCE-BODY* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-COMPLIANCE-BODY MODULE-COMPLIANCE-BODY*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE MODULE-COMPLIANCE-BODY) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE MODULE-COMPLIANCE-BODY*))) :-BUILD-FN MODULE-COMPLIANCE-BODY*1177)))) +(IDENTIFIER+,1$ . #S(ZEBU::ZB-RULE :-NAME IDENTIFIER+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER))) :-BUILD-FN IDENTIFIER+,1$1175) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (IDENTIFIER "," IDENTIFIER+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE IDENTIFIER) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE IDENTIFIER+,1$))) :-BUILD-FN IDENTIFIER+,1$1176)))) +(MODULE-REVISION* . #S(ZEBU::ZB-RULE :-NAME MODULE-REVISION* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (MODULE-REVISION MODULE-REVISION*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE MODULE-REVISION) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE MODULE-REVISION*))) :-BUILD-FN MODULE-REVISION*1174)))) +(GARBAGE+ . #S(ZEBU::ZB-RULE :-NAME GARBAGE+ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE))) :-BUILD-FN GARBAGE+1172) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (GARBAGE GARBAGE+) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE GARBAGE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE GARBAGE+))) :-BUILD-FN GARBAGE+1173)))) +(SYMBOL+,1$ . #S(ZEBU::ZB-RULE :-NAME SYMBOL+,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL))) :-BUILD-FN SYMBOL+,1$1170) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL "," SYMBOL+,1$) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE SYMBOL+,1$))) :-BUILD-FN SYMBOL+,1$1171)))) +(SYMBOLS-FROM-MODULE* . #S(ZEBU::ZB-RULE :-NAME SYMBOLS-FROM-MODULE* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOLS-FROM-MODULE SYMBOLS-FROM-MODULE*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOLS-FROM-MODULE) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE SYMBOLS-FROM-MODULE*))) :-BUILD-FN SYMBOLS-FROM-MODULE*1169)))) +(|Rest-SYMBOL*,1$| . #S(ZEBU::ZB-RULE :-NAME |Rest-SYMBOL*,1$| :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX ("," SYMBOL |Rest-SYMBOL*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-SYMBOL*,1$|))) :-BUILD-FN |Rest-SYMBOL*,1$1168|)))) +(SYMBOL*,1$ . #S(ZEBU::ZB-RULE :-NAME SYMBOL*,1$ :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (SYMBOL |Rest-SYMBOL*,1$|) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE SYMBOL) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE |Rest-SYMBOL*,1$|))) :-BUILD-FN SYMBOL*,1$1167)))) +(ASSIGNMENT* . #S(ZEBU::ZB-RULE :-NAME ASSIGNMENT* :-PRODUCTIONS (#S(ZEBU::PRODUCTION-RHS :-SYNTAX NIL :-SEMANTICS NIL :-BUILD-FN IDENTITY*) #S(ZEBU::PRODUCTION-RHS :-SYNTAX (ASSIGNMENT ASSIGNMENT*) :-SEMANTICS #S(ZEBU::FEAT-TERM :-TYPE KB-SEQUENCE :-SLOTS (#S(ZEBU::LABEL-VALUE-PAIR :-LABEL FIRST :-VALUE ASSIGNMENT) #S(ZEBU::LABEL-VALUE-PAIR :-LABEL REST :-VALUE ASSIGNMENT*))) :-BUILD-FN ASSIGNMENT*1166)))) ) \ No newline at end of file

Modified: trunk/asn.1/asn.1.zb ============================================================================== --- trunk/asn.1/asn.1.zb (original) +++ trunk/asn.1/asn.1.zb Mon Sep 24 14:47:30 2007 @@ -11,7 +11,8 @@ :case-sensitive t :lex-cats ((Type-Reference "[A-Z][a-zA-Z0-9-]*") (Signed-Number "-?[0-9]+") - (Anything "[^ ]+"))) + (Anything "[^ ]+") + (HString "'[0-9]*'H")))

;; Domain Definitions

@@ -76,6 +77,7 @@ | Identifier "OBJECT-IDENTITY" "STATUS" Status "DESCRIPTION" Description + Object-Identity-Reference "::=" Object-Identifier-Value { Value-Assignment:[(name Identifier) (type :object-identity) @@ -94,11 +96,13 @@

| Identifier "OBJECT-TYPE" "SYNTAX" Type + Object-Type-Units "MAX-ACCESS" Max-Access "STATUS" Status "DESCRIPTION" Description Object-Type-Index Object-Type-Augments + Object-Type-Reference Object-Type-Defval "::=" Object-Identifier-Value { Value-Assignment:[(name Identifier) @@ -127,8 +131,8 @@ "STATUS" Status "DESCRIPTION" Description "MODULE" "MANDATORY-GROUPS" "{" Identifier+ "," "}" - Module-Compliance-Group* " " - Module-Compliance-Object* " " + Module-Compliance-Body* " " + Module-Compliance-Other "::=" Object-Identifier-Value { Value-Assignment:[(name Identifier) (type :module-compliance) @@ -142,7 +146,6 @@ { Value-Assignment:[(name Identifier) (type :object-group) (value Object-Identifier-Value)] } - ;

Status --> Identifier; @@ -153,15 +156,33 @@ Organization --> String; Contact-Info --> String; Module-Revision --> "REVISION" String "DESCRIPTION" String; -Object-Type-Index --> "INDEX" "{" Identifier+ "," "}" |; +Object-Identity-Reference --> "REFERENCE" String |; +Object-Type-Index --> "INDEX" "{" Object-Type-Index-Value+ "," "}" |; +Object-Type-Index-Value --> "IMPLIED" Identifier | Identifier; Object-Type-Augments --> "AUGMENTS" "{" Identifier "}" |; -Object-Type-Defval --> "DEFVAL" "{" Identifier "}" |; +Object-Type-Defval --> "DEFVAL" "{" Object-Type-Defval-Value "}" |; +Object-Type-Defval-Value --> String + | HString + | Obj-Id-Component + | "{" Identifier* "," "}"; + +Object-Type-Units --> "UNITS" String |; +Object-Type-Reference --> "REFERENCE" String |; +Module-Compliance-Body --> Module-Compliance-Group | Module-Compliance-Object; + +Module-Compliance-Other --> "MODULE" Type-Reference + "MANDATORY-GROUPS" "{" Identifier+ "," "}" + | ; + Module-Compliance-Group --> "GROUP" Identifier "DESCRIPTION" Description; Module-Compliance-Object --> "OBJECT" Identifier Module-Compliance-Object-Syntax - "MIN-ACCESS" Min-Access + Module-Compliance-Object-Write-Syntax + Module-Compliance-Object-Access "DESCRIPTION" Description; Module-Compliance-Object-Syntax --> "SYNTAX" Type |; +Module-Compliance-Object-Write-Syntax --> "WRITE-SYNTAX" Type |; +Module-Compliance-Object-Access --> "MIN-ACCESS" Min-Access |;

Notification-Type-Objects --> "OBJECTS" "{" Identifier+ "," "}" |;

@@ -178,15 +199,6 @@

Named-Type --> Type-Reference ;

-;; "TimeTicks" -;; | "TimeStamp" -;; | "SysOREntry" -;; | "Counter32" -;; | "TestAndIncr" -;; | "IANAifType" -;; | "IfEntry" -;; ; - Textual-Convention-Type --> "TEXTUAL-CONVENTION" Textual-Convention-Display-Hint "STATUS" Identifier @@ -214,8 +226,14 @@ Number-Form --> Number;

Choice-Type --> "CHOICE" "{" Garbage+ " " "}"; -String-Type --> "OCTET" "STRING" String-Options - | "DisplayString" String-Options; +String-Type --> String-Type-Name String-Options; + +String-Type-Name --> "OCTET" "STRING" + | "DisplayString" + | "PhysAddress" + | "SnmpAdminString" + | "DateAndTime" + | "InternationalDisplayString" ;

String-Options --> "(" "SIZE" "(" Numbers ")" ")" |;

@@ -223,15 +241,21 @@ | Signed-Number ".." Signed-Number | Signed-Number;

-Integer-Type --> "INTEGER" "(" Signed-Number ".." Signed-Number ")" - | "INTEGER" "{" Named-Number+ "," "}" - | "Integer32" "(" Signed-Number ".." Signed-Number ")" - | "Integer32" ; +Integer-Type --> Integer-Type-Name "(" Splited-Numbers+ "|" ")" + | Integer-Type-Name "{" Named-Number+ "," "}" + | Integer-Type-Name; + +Integer-Type-Name --> "INTEGER" + | "Integer32" + | "Unsigned32" + | "RowStatus" + | "SnmpSecurityModel" + | "BITS" ;

+Splited-Numbers --> Signed-Number | Signed-Number ".." Signed-Number; Named-Number --> Identifier "(" Signed-Number ")";

Sequence-Type --> "SEQUENCE" "{" Garbage* " " "}"; - Sequence-Of-Type --> "SEQUENCE" "OF" Type;

Tagged-Type --> Tag Type | Tag "IMPLICIT" Type | Tag "EXPLICIT" Type;

Modified: trunk/asn.1/mib-browse.lisp ============================================================================== --- trunk/asn.1/mib-browse.lisp (original) +++ trunk/asn.1/mib-browse.lisp Mon Sep 24 14:47:30 2007 @@ -10,18 +10,6 @@ (id (car (tree-id x)))) (format nil "~A(~D)" name id))))

-(defun display-graph-selection (self data) - (let ((name (reverse (tree-name data))) - (oid (reverse (tree-id data)))) - (with-slots (display-pane-name display-pane-oid) self - (setf (capi:display-pane-text display-pane-name) - (format nil "~A~{.~A~}" (car name) (cdr name)) - (capi:display-pane-text display-pane-oid) - (format nil "~A~{.~A~}" (car oid) (cdr oid)))))) - -(defun mib-browser () - (capi:display (make-instance 'mib-browser))) - (capi:define-interface mib-browser () () (:panes @@ -32,7 +20,6 @@ :print-function 'print-child :reader graph-reader :roots (tree-nodes *mib-tree*) - :do-cache t :callback-type :interface-data :selection-callback 'display-graph-selection) (title-pane-name @@ -56,7 +43,20 @@ '(title-pane-name display-pane-name title-pane-oid display-pane-oid) :y-adjust :center)) (:default-initargs - :layout 'main-layout :best-height 768 :best-width 1024 + :layout 'main-layout :title "MIB Browser")) + +(defun display-graph-selection (self data) + (let ((name (reverse (tree-name data))) + (oid (reverse (tree-id data)))) + (with-slots (display-pane-name display-pane-oid) self + (setf (capi:display-pane-text display-pane-name) + (format nil "~A~{.~A~}" (car name) (cdr name)) + (capi:display-pane-text display-pane-oid) + (format nil "~A~{.~A~}" (car oid) (cdr oid)))))) + +(defun mbrowse () + (capi:display (make-instance 'mib-browser))) +

Modified: trunk/asn.1/mib.lisp ============================================================================== --- trunk/asn.1/mib.lisp (original) +++ trunk/asn.1/mib.lisp Mon Sep 24 14:47:30 2007 @@ -19,8 +19,8 @@ ;;; Tree-Name -> ( string . Tree-Name ) ;;; Tree-Object -> Object-ID [ ID-List Name-List ]

-(defvar *mib-tree* '((() () ())) "MIB Tree") ;; empty tree -(defvar *mib-index* (make-hash-table :test #'equal) "MIB Name Hash") +(defvar *mib-tree*) ;; empty tree +(defvar *mib-index*)

(defun tree-data (node) (car node)) (defun tree-nodes (node) (cdr node)) @@ -116,10 +116,11 @@ (asdf:component-pathname (asdf:find-system :net-snmp)))))

(defun reset-mib-tree () - (progn - (setf *mib-tree* '((() () ()))) - (clrhash *mib-index*) - (insert-node *mib-tree* 0 "zero") - (insert-node *mib-tree* 1 "iso") - (values *mib-tree* *mib-index*))) + (setf *mib-tree* (list (list nil nil nil))) + (setf *mib-index* (make-hash-table :test #'equal)) + (insert-node *mib-tree* 0 "zero") + (insert-node *mib-tree* 1 "iso") + (values *mib-tree* *mib-index*))

+(eval-when (:load-toplevel :execute) + (reset-mib-tree))

Modified: trunk/asn.1/parse.lisp ============================================================================== --- trunk/asn.1/parse.lisp (original) +++ trunk/asn.1/parse.lisp Mon Sep 24 14:47:30 2007 @@ -1,12 +1,34 @@ (in-package :asn.1)

+(defparameter *mib-list* + '("SNMPv2-SMI" + "SNMPv2-MIB" + "IF-MIB" + "IP-MIB" ;; one char patch: string not close + "AGENTX-MIB" + "BGP4-MIB" + "SNMP-TARGET-MIB" + "SNMP-FRAMEWORK-MIB" + "DISMAN-EVENT-MIB" + "DISMAN-SCHEDULE-MIB" + "DISMAN-SCRIPT-MIB" + "EtherLike-MIB" + "HCNUM-TC" + "HOST-RESOURCES-MIB" + "HOST-RESOURCES-TYPES" + "IANA-ADDRESS-FAMILY-NUMBERS-MIB" + "IANAifType-MIB" + "IANA-LANGUAGE-MIB" + "IANA-RTPROTO-MIB" + "IF-INVERTED-STACK-MIB" + "INET-ADDRESS-MIB" + "IP-FORWARD-MIB")) + (defparameter *mib-pathname-base* (merge-pathnames (make-pathname :directory '(:relative "mibs")) (asdf:component-pathname (asdf:find-system :net-snmp))))

-;; (defvar *mib-pathname-base* #p"/usr/share/snmp/mibs/") - (defun mib-pathname (name &optional (base *mib-pathname-base*)) (merge-pathnames (make-pathname :name name :type "txt") base)) @@ -14,10 +36,6 @@ (defun test-syntax-2 (name) (parse-mib (mib-pathname name)))

-(defparameter *mibs-list* - '("SNMPv2-SMI" - "SNMPV2-MIB")) - (defun parse-value-assignments (syntax-tree) "Parse all value assignments into a list" (let ((module (car syntax-tree))) @@ -58,3 +76,9 @@ (defun parse% (name) (mapcar #'parse-value-assignment (parse-value-assignments (parse-mib (mib-pathname name))))) + +(defun build-mib-tree () + (dolist (i *mib-list* t) + (format t "Parsing ~A" i) + (parse i) + (format t ".~%")))

Added: trunk/mibs/AGENTX-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/AGENTX-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,527 @@ +AGENTX-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, mib-2 + FROM SNMPv2-SMI + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + TEXTUAL-CONVENTION, TimeStamp, TruthValue, TDomain + FROM SNMPv2-TC; +agentxMIB MODULE-IDENTITY + LAST-UPDATED "200001100000Z" -- Midnight 10 January 2000 + ORGANIZATION "AgentX Working Group" + CONTACT-INFO "WG-email: agentx@dorothy.bmc.com + Subscribe: agentx-request@dorothy.bmc.com + WG-email Archive: ftp://ftp.peer.com/pub/agentx/archives + FTP repository: ftp://ftp.peer.com/pub/agentx + http://www.ietf.org/html.charters/agentx-charter.html + + Chair: Bob Natale + ACE*COMM Corporation + Email: bnatale@acecomm.com + + WG editor: Mark Ellison + Ellison Software Consulting, Inc. + Email: ellison@world.std.com + + Co-author: Lauren Heintz + Cisco Systems, + EMail: lheintz@cisco.com + + Co-author: Smitha Gudur + Independent Consultant + Email: sgudur@hotmail.com + " + DESCRIPTION "This is the MIB module for the SNMP Agent Extensibility + Protocol (AgentX). This MIB module will be implemented by + the master agent. + " + + REVISION "200001100000Z" -- Midnight 10 January 2000 + DESCRIPTION + "Initial version published as RFC 2742." + ::= { mib-2 74 } + + -- Textual Conventions + + AgentxTAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Denotes a transport service address. This is identical to + the TAddress textual convention (SNMPv2-SMI) except that + zero-length values are permitted. + " + SYNTAX OCTET STRING (SIZE (0..255)) + + -- Administrative assignments + + agentxObjects OBJECT IDENTIFIER ::= { agentxMIB 1 } + agentxGeneral OBJECT IDENTIFIER ::= { agentxObjects 1 } + agentxConnection OBJECT IDENTIFIER ::= { agentxObjects 2 } + agentxSession OBJECT IDENTIFIER ::= { agentxObjects 3 } + agentxRegistration OBJECT IDENTIFIER ::= { agentxObjects 4 } + + agentxDefaultTimeout OBJECT-TYPE + SYNTAX INTEGER (0..255) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The default length of time, in seconds, that the master + agent should allow to elapse after dispatching a message + to a session before it regards the subagent as not + responding. This is a system-wide value that may + override the timeout value associated with a particular + session (agentxSessionTimeout) or a particular registered + MIB region (agentxRegTimeout). If the associated value of + agentxSessionTimeout and agentxRegTimeout are zero, or + impractical in accordance with implementation-specific + procedure of the master agent, the value represented by + this object will be the effective timeout value for the + + master agent to await a response to a dispatch from a + given subagent. + " + DEFVAL { 5 } + ::= { agentxGeneral 1 } + + agentxMasterAgentXVer OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AgentX protocol version supported by this master agent. + The current protocol version is 1. Note that the master agent + must also allow interaction with earlier version subagents. + " + ::= { agentxGeneral 2 } + + -- The AgentX Subagent Connection Group + + agentxConnTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last row creation or deletion + occurred in the agentxConnectionTable. + " + ::= { agentxConnection 1 } + + agentxConnectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentxConnectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The agentxConnectionTable tracks all current AgentX transport + connections. There may be zero, one, or more AgentX sessions + carried on a given AgentX connection. + " + ::= { agentxConnection 2 } + + agentxConnectionEntry OBJECT-TYPE + SYNTAX AgentxConnectionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An agentxConnectionEntry contains information describing a + single AgentX transport connection. A connection may be + + used to support zero or more AgentX sessions. An entry is + created when a new transport connection is established, + and is destroyed when the transport connection is terminated. + " + INDEX { agentxConnIndex } + ::= { agentxConnectionTable 1 } + + AgentxConnectionEntry ::= SEQUENCE { + agentxConnIndex Unsigned32, + agentxConnOpenTime TimeStamp, + agentxConnTransportDomain TDomain, + agentxConnTransportAddress AgentxTAddress } + + agentxConnIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "agentxConnIndex contains the value that uniquely identifies + an open transport connection used by this master agent + to provide AgentX service. Values of this index should + not be re-used. The value assigned to a given transport + connection is constant for the lifetime of that connection. + " + ::= { agentxConnectionEntry 1 } + + agentxConnOpenTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this connection was established + and, therefore, its value when this entry was added to the table. + " + ::= { agentxConnectionEntry 2 } + + agentxConnTransportDomain OBJECT-TYPE + SYNTAX TDomain + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transport protocol in use for this connection to the + subagent. + " + ::= { agentxConnectionEntry 3 } + + agentxConnTransportAddress OBJECT-TYPE + SYNTAX AgentxTAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transport address of the remote (subagent) end of this + connection to the master agent. This object may be zero-length + for unix-domain sockets (and possibly other types of transport + addresses) since the subagent need not bind a filename to its + local socket. + " + ::= { agentxConnectionEntry 4 } + + -- The AgentX Subagent Session Group + + agentxSessionTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last row creation or deletion + occurred in the agentxSessionTable. + " + ::= { agentxSession 1 } + + agentxSessionTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentxSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of AgentX subagent sessions currently in effect. + " + ::= { agentxSession 2 } + + agentxSessionEntry OBJECT-TYPE + SYNTAX AgentxSessionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single open session between the AgentX + master agent and a subagent is contained in this entry. An + entry is created when a new session is successfully established + and is destroyed either when the subagent transport connection + has terminated or when the subagent session is closed. + " + INDEX { agentxConnIndex, agentxSessionIndex } + ::= { agentxSessionTable 1 } + + AgentxSessionEntry ::= SEQUENCE { + agentxSessionIndex Unsigned32, + agentxSessionObjectID OBJECT IDENTIFIER, + agentxSessionDescr SnmpAdminString, + agentxSessionAdminStatus INTEGER, + agentxSessionOpenTime TimeStamp, + agentxSessionAgentXVer INTEGER, + agentxSessionTimeout INTEGER + } + + agentxSessionIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A unique index for the subagent session. It is the same as + h.sessionID defined in the agentx header. Note that if + a subagent's session with the master agent is closed for + any reason its index should not be re-used. + A value of zero(0) is specifically allowed in order + to be compatible with the definition of h.sessionId. + " + ::= { agentxSessionEntry 1 } + + agentxSessionObjectID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is taken from the o.id field of the agentx-Open-PDU. + This attribute will report a value of '0.0' for subagents + not supporting the notion of an AgentX session object + identifier. + " + ::= { agentxSessionEntry 2 } + + agentxSessionDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of the session. This is analogous to + sysDescr defined in the SNMPv2-MIB in RFC 1907 [19] and is + taken from the o.descr field of the agentx-Open-PDU. + This attribute will report a zero-length string value for + subagents not supporting the notion of a session description. + " + ::= { agentxSessionEntry 3 } + + agentxSessionAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative (desired) status of the session. Setting + the value to 'down(2)' closes the subagent session (with c.reason + set to 'reasonByManager'). + " + ::= { agentxSessionEntry 4 } + + agentxSessionOpenTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when this session was opened and, + therefore, its value when this entry was added to the table. + " + ::= { agentxSessionEntry 5 } + + agentxSessionAgentXVer OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the AgentX protocol supported by the + session. This must be less than or equal to the value of + agentxMasterAgentXVer. + " + ::= { agentxSessionEntry 6 } + + agentxSessionTimeout OBJECT-TYPE + SYNTAX INTEGER (0..255) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The length of time, in seconds, that a master agent should + allow to elapse after dispatching a message to this session + before it regards the subagent as not responding. This value + is taken from the o.timeout field of the agentx-Open-PDU. + This is a session-specific value that may be overridden by + values associated with the specific registered MIB regions + (see agentxRegTimeout). A value of zero(0) indicates that + the master agent's default timeout value should be used + + (see agentxDefaultTimeout). + " + ::= { agentxSessionEntry 7 } + + -- The AgentX Registration Group + + agentxRegistrationTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the last row creation or deletion + occurred in the agentxRegistrationTable. + " + ::= { agentxRegistration 1 } + + agentxRegistrationTable OBJECT-TYPE + SYNTAX SEQUENCE OF AgentxRegistrationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of registered regions. + " + ::= { agentxRegistration 2 } + + agentxRegistrationEntry OBJECT-TYPE + SYNTAX AgentxRegistrationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Contains information for a single registered region. An + entry is created when a session successfully registers a + region and is destroyed for any of three reasons: this region + is unregistered by the session, the session is closed, + or the subagent connection is closed. + " + INDEX { agentxConnIndex, agentxSessionIndex, agentxRegIndex } + ::= { agentxRegistrationTable 1 } + + AgentxRegistrationEntry ::= SEQUENCE { + agentxRegIndex Unsigned32, + agentxRegContext OCTET STRING, + agentxRegStart OBJECT IDENTIFIER, + agentxRegRangeSubId Unsigned32, + agentxRegUpperBound Unsigned32, + agentxRegPriority Unsigned32, + agentxRegTimeout INTEGER, + agentxRegInstance TruthValue } + + agentxRegIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "agentxRegIndex uniquely identifies a registration entry. + This value is constant for the lifetime of an entry. + " + ::= { agentxRegistrationEntry 1 } + + agentxRegContext OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The context in which the session supports the objects in this + region. A zero-length context indicates the default context. + " + ::= { agentxRegistrationEntry 2 } + + agentxRegStart OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The starting OBJECT IDENTIFIER of this registration entry. The + session identified by agentxSessionIndex implements objects + starting at this value (inclusive). Note that this value could + identify an object type, an object instance, or a partial object + instance. + " + ::= { agentxRegistrationEntry 3 } + + agentxRegRangeSubId OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "agentxRegRangeSubId is used to specify the range. This is + taken from r.region_subid in the registration PDU. If the value + of this object is zero, no range is specified. If it is non-zero, + it identifies the `nth' sub-identifier in r.region for which + this entry's agentxRegUpperBound value is substituted in the + OID for purposes of defining the region's upper bound. + " + ::= { agentxRegistrationEntry 4 } + + agentxRegUpperBound OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "agentxRegUpperBound represents the upper-bound sub-identifier in + a registration. This is taken from the r.upper_bound in the + registration PDU. If agentxRegRangeSubid (r.region_subid) is + zero, this value is also zero and is not used to define an upper + bound for this registration. + " + ::= { agentxRegistrationEntry 5 } + + agentxRegPriority OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The registration priority. Lower values have higher priority. + This value is taken from r.priority in the register PDU. + Sessions should use the value of 127 for r.priority if a + default value is desired. + " + ::= { agentxRegistrationEntry 6 } + + agentxRegTimeout OBJECT-TYPE + SYNTAX INTEGER (0..255) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The timeout value, in seconds, for responses to + requests associated with this registered MIB region. + A value of zero(0) indicates the default value (indicated + by by agentxSessionTimeout or agentxDefaultTimeout) is to + be used. This value is taken from the r.timeout field of + the agentx-Register-PDU. + " + ::= { agentxRegistrationEntry 7 } + + agentxRegInstance OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of agentxRegInstance is `true' for + registrations for which the INSTANCE_REGISTRATION + was set, and is `false' for all other registrations. + " + ::= { agentxRegistrationEntry 8 } + + -- Conformance Statements for AgentX + + agentxConformance OBJECT IDENTIFIER ::= { agentxMIB 2 } + agentxMIBGroups OBJECT IDENTIFIER ::= { agentxConformance 1 } + agentxMIBCompliances OBJECT IDENTIFIER ::= { agentxConformance 2 } + + -- Compliance Statements for AgentX + + agentxMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities that implement the + AgentX protocol. Note that a compliant agent can implement all + objects in this MIB module as read-only. + " + MODULE -- this module + MANDATORY-GROUPS { agentxMIBGroup } + + OBJECT agentxSessionAdminStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required. + " + ::= { agentxMIBCompliances 1 } + + agentxMIBGroup OBJECT-GROUP + OBJECTS { + agentxDefaultTimeout, + agentxMasterAgentXVer, + agentxConnTableLastChange, + agentxConnOpenTime, + agentxConnTransportDomain, + agentxConnTransportAddress, + agentxSessionTableLastChange, + agentxSessionTimeout, + agentxSessionObjectID, + agentxSessionDescr, + agentxSessionAdminStatus, + agentxSessionOpenTime, + agentxSessionAgentXVer, + agentxRegistrationTableLastChange, + agentxRegContext, + agentxRegStart, + agentxRegRangeSubId, + agentxRegUpperBound, + agentxRegPriority, + agentxRegTimeout, + agentxRegInstance + } + STATUS current + DESCRIPTION + "All accessible objects in the AgentX MIB. + " + ::= { agentxMIBGroups 1 } + + END

Added: trunk/mibs/BGP4-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/BGP4-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,929 @@ + BGP4-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + IpAddress, Integer32, Counter32, Gauge32, mib-2 + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF; + + bgp MODULE-IDENTITY + LAST-UPDATED "9902100000Z" + ORGANIZATION "IETF IDR Working Group" + CONTACT-INFO "E-mail: idr@merit.net + + Susan Hares (Editor) + Merit Network + 4251 Plymouth Road + Suite C + Ann Arbor, MI 48105-2785 + Tel: +1 734 936 2095 + Fax: +1 734 647 3185 + E-mail: skh@merit.edu + + Jeff Johnson (Editor) + RedBack Networks, Inc. + 1389 Moffett Park Drive + Sunnyvale, CA 94089-1134 + Tel: +1 408 548 3516 + Fax: +1 408 548 3599 + E-mail: jeff@redback.com" + DESCRIPTION + "The MIB module for BGP-4." + REVISION "9902100000Z" + DESCRIPTION + "Corrected duplicate OBJECT IDENTIFIER + assignment in the conformance information." + REVISION "9601080000Z" + DESCRIPTION + "1) Fixed the definitions of the traps to + make them equivalent to their initial + definition in RFC 1269. + 2) Added compliance and conformance info." + ::= { mib-2 15 } + + bgpVersion OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Vector of supported BGP protocol version + numbers. Each peer negotiates the version + from this vector. Versions are identified + via the string of bits contained within this + object. The first octet contains bits 0 to + 7, the second octet contains bits 8 to 15, + and so on, with the most significant bit + referring to the lowest bit number in the + octet (e.g., the MSB of the first octet + refers to bit 0). If a bit, i, is present + and set, then the version (i+1) of the BGP + is supported." + ::= { bgp 1 } + + bgpLocalAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local autonomous system number." + ::= { bgp 2 } + + + + -- BGP Peer table. This table contains, one entry per BGP + -- peer, information about the BGP peer. + + bgpPeerTable OBJECT-TYPE + SYNTAX SEQUENCE OF BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "BGP peer table. This table contains, + one entry per BGP peer, information about the + connections with BGP peers." + ::= { bgp 3 } + + bgpPeerEntry OBJECT-TYPE + SYNTAX BgpPeerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry containing information about the + connection with a BGP peer." + INDEX { bgpPeerRemoteAddr } + ::= { bgpPeerTable 1 } + + BgpPeerEntry ::= SEQUENCE { + bgpPeerIdentifier + IpAddress, + bgpPeerState + INTEGER, + bgpPeerAdminStatus + INTEGER, + bgpPeerNegotiatedVersion + Integer32, + bgpPeerLocalAddr + IpAddress, + bgpPeerLocalPort + INTEGER, + bgpPeerRemoteAddr + IpAddress, + bgpPeerRemotePort + INTEGER, + bgpPeerRemoteAs + INTEGER, + bgpPeerInUpdates + Counter32, + bgpPeerOutUpdates + Counter32, + bgpPeerInTotalMessages + Counter32, + bgpPeerOutTotalMessages + Counter32, + bgpPeerLastError + OCTET STRING, + bgpPeerFsmEstablishedTransitions + Counter32, + bgpPeerFsmEstablishedTime + Gauge32, + bgpPeerConnectRetryInterval + INTEGER, + bgpPeerHoldTime + INTEGER, + bgpPeerKeepAlive + INTEGER, + bgpPeerHoldTimeConfigured + INTEGER, + bgpPeerKeepAliveConfigured + INTEGER, + bgpPeerMinASOriginationInterval + INTEGER, + bgpPeerMinRouteAdvertisementInterval + INTEGER, + bgpPeerInUpdateElapsedTime + Gauge32 + } + + bgpPeerIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of this entry's BGP peer." + ::= { bgpPeerEntry 1 } + + bgpPeerState OBJECT-TYPE + SYNTAX INTEGER { + idle(1), + connect(2), + active(3), + opensent(4), + openconfirm(5), + established(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP peer connection state." + ::= { bgpPeerEntry 2 } + + bgpPeerAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + stop(1), + start(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of the BGP connection. A + transition from 'stop' to 'start' will cause + the BGP Start Event to be generated. A + transition from 'start' to 'stop' will cause + the BGP Stop Event to be generated. This + parameter can be used to restart BGP peer + connections. Care should be used in providing + write access to this object without adequate + authentication." + ::= { bgpPeerEntry 3 } + + bgpPeerNegotiatedVersion OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The negotiated version of BGP running between + the two peers." + ::= { bgpPeerEntry 4 } + + bgpPeerLocalAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local IP address of this entry's BGP + connection." + ::= { bgpPeerEntry 5 } + + bgpPeerLocalPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local port for the TCP connection between + the BGP peers." + ::= { bgpPeerEntry 6 } + + bgpPeerRemoteAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote IP address of this entry's BGP + peer." + ::= { bgpPeerEntry 7 } + + bgpPeerRemotePort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote port for the TCP connection between + the BGP peers. Note that the objects + bgpPeerLocalAddr, bgpPeerLocalPort, + bgpPeerRemoteAddr and bgpPeerRemotePort + provide the appropriate reference to the + standard MIB TCP connection table." + ::= { bgpPeerEntry 8 } + + bgpPeerRemoteAs OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remote autonomous system number." + ::= { bgpPeerEntry 9 } + + bgpPeerInUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages received on + this connection. This object should be + initialized to zero (0) when the connection is + established." + ::= { bgpPeerEntry 10 } + + bgpPeerOutUpdates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of BGP UPDATE messages transmitted + on this connection. This object should be + initialized to zero (0) when the connection is + established." + ::= { bgpPeerEntry 11 } + + bgpPeerInTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages received from the + remote peer on this connection. This object + should be initialized to zero when the + connection is established." + ::= { bgpPeerEntry 12 } + + bgpPeerOutTotalMessages OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of messages transmitted to + the remote peer on this connection. This object + should be initialized to zero when the + connection is established." + ::= { bgpPeerEntry 13 } + + bgpPeerLastError OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last error code and subcode seen by this + peer on this connection. If no error has + occurred, this field is zero. Otherwise, the + first byte of this two byte OCTET STRING + contains the error code, and the second byte + contains the subcode." + ::= { bgpPeerEntry 14 } + + bgpPeerFsmEstablishedTransitions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of times the BGP FSM + transitioned into the established state." + ::= { bgpPeerEntry 15 } + + bgpPeerFsmEstablishedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This timer indicates how long (in seconds) this + peer has been in the Established state or how long + since this peer was last in the Established state. + It is set to zero when a new peer is configured or + the router is booted." + ::= { bgpPeerEntry 16 } + + bgpPeerConnectRetryInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the ConnectRetry + timer. The suggested value for this timer is + 120 seconds." + ::= { bgpPeerEntry 17 } + + bgpPeerHoldTime OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold Timer + established with the peer. The value of this + object is calculated by this BGP speaker by + using the smaller of the value in + bgpPeerHoldTimeConfigured and the Hold Time + received in the OPEN message. This value + must be at lease three seconds if it is not + zero (0) in which case the Hold Timer has + not been established with the peer, or, the + value of bgpPeerHoldTimeConfigured is zero (0)." + ::= { bgpPeerEntry 18 } + + bgpPeerKeepAlive OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time interval in seconds for the KeepAlive + timer established with the peer. The value of + this object is calculated by this BGP speaker + such that, when compared with bgpPeerHoldTime, + it has the same proportion as what + bgpPeerKeepAliveConfigured has when compared + with bgpPeerHoldTimeConfigured. If the value + of this object is zero (0), it indicates that + the KeepAlive timer has not been established + with the peer, or, the value of + bgpPeerKeepAliveConfigured is zero (0)." + ::= { bgpPeerEntry 19 } + + bgpPeerHoldTimeConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 3..65535 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the Hold Time + configured for this BGP speaker with this peer. + This value is placed in an OPEN message sent to + this peer by this BGP speaker, and is compared + with the Hold Time field in an OPEN message + received from the peer when determining the Hold + Time (bgpPeerHoldTime) with the peer. This value + must not be less than three seconds if it is not + zero (0) in which case the Hold Time is NOT to be + established with the peer. The suggested value for + this timer is 90 seconds." + ::= { bgpPeerEntry 20 } + + bgpPeerKeepAliveConfigured OBJECT-TYPE + SYNTAX INTEGER ( 0 | 1..21845 ) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the KeepAlive timer + configured for this BGP speaker with this peer. + The value of this object will only determine the + KEEPALIVE messages' frequency relative to the value + specified in bgpPeerHoldTimeConfigured; the actual + time interval for the KEEPALIVE messages is + indicated by bgpPeerKeepAlive. A reasonable + maximum value for this timer would be configured to + be one third of that of bgpPeerHoldTimeConfigured. + If the value of this object is zero (0), no + periodical KEEPALIVE messages are sent to the peer + after the BGP connection has been established. The + suggested value for this timer is 30 seconds." + ::= { bgpPeerEntry 21 } + + bgpPeerMinASOriginationInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinASOriginationInterval timer. + The suggested value for this timer is 15 seconds." + ::= { bgpPeerEntry 22 } + + bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Time interval in seconds for the + MinRouteAdvertisementInterval timer. + The suggested value for this timer is 30 seconds." + ::= { bgpPeerEntry 23 } + + bgpPeerInUpdateElapsedTime OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Elapsed time in seconds since the last BGP + UPDATE message was received from the peer. + Each time bgpPeerInUpdates is incremented, + the value of this object is set to zero (0)." + ::= { bgpPeerEntry 24 } + + + + bgpIdentifier OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The BGP Identifier of local system." + ::= { bgp 4 } + + + + -- Received Path Attribute Table. This table contains, + -- one entry per path to a network, path attributes + -- received from all peers running BGP version 3 or less. + -- This table is obsolete, having been replaced in + -- functionality with the bgp4PathAttrTable. + + bgpRcvdPathAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF BgpPathAttrEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "The BGP Received Path Attribute Table contains + information about paths to destination networks + received from all peers running BGP version 3 or + less." + ::= { bgp 5 } + + bgpPathAttrEntry OBJECT-TYPE + SYNTAX BgpPathAttrEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "Information about a path to a network." + INDEX { bgpPathAttrDestNetwork, + bgpPathAttrPeer } + ::= { bgpRcvdPathAttrTable 1 } + + BgpPathAttrEntry ::= SEQUENCE { + bgpPathAttrPeer + IpAddress, + bgpPathAttrDestNetwork + IpAddress, + bgpPathAttrOrigin + INTEGER, + bgpPathAttrASPath + OCTET STRING, + bgpPathAttrNextHop + IpAddress, + bgpPathAttrInterASMetric + Integer32 + } + + bgpPathAttrPeer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The IP address of the peer where the path + information was learned." + ::= { bgpPathAttrEntry 1 } + + bgpPathAttrDestNetwork OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The address of the destination network." + ::= { bgpPathAttrEntry 2 } + + bgpPathAttrOrigin OBJECT-TYPE + SYNTAX INTEGER { + igp(1),-- networks are interior + egp(2),-- networks learned via EGP + incomplete(3) -- undetermined + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The ultimate origin of the path information." + ::= { bgpPathAttrEntry 3 } + + bgpPathAttrASPath OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The set of ASs that must be traversed to reach + the network. This object is probably best + represented as SEQUENCE OF INTEGER. For SMI + compatibility, though, it is represented as + OCTET STRING. Each AS is represented as a pair + of octets according to the following algorithm: + + first-byte-of-pair = ASNumber / 256; + second-byte-of-pair = ASNumber & 255;" + ::= { bgpPathAttrEntry 4 } + + bgpPathAttrNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The address of the border router that should + be used for the destination network." + ::= { bgpPathAttrEntry 5 } + + bgpPathAttrInterASMetric OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The optional inter-AS metric. If this + attribute has not been provided for this route, + the value for this object is 0." + ::= { bgpPathAttrEntry 6 } + + + + -- BGP-4 Received Path Attribute Table. This table contains, + -- one entry per path to a network, path attributes + -- received from all peers running BGP-4. + + bgp4PathAttrTable OBJECT-TYPE + SYNTAX SEQUENCE OF Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The BGP-4 Received Path Attribute Table contains + information about paths to destination networks + received from all BGP4 peers." + ::= { bgp 6 } + + bgp4PathAttrEntry OBJECT-TYPE + SYNTAX Bgp4PathAttrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a path to a network." + INDEX { bgp4PathAttrIpAddrPrefix, + bgp4PathAttrIpAddrPrefixLen, + bgp4PathAttrPeer } + ::= { bgp4PathAttrTable 1 } + + Bgp4PathAttrEntry ::= SEQUENCE { + bgp4PathAttrPeer + IpAddress, + bgp4PathAttrIpAddrPrefixLen + INTEGER, + bgp4PathAttrIpAddrPrefix + IpAddress, + bgp4PathAttrOrigin + INTEGER, + bgp4PathAttrASPathSegment + OCTET STRING, + bgp4PathAttrNextHop + IpAddress, + bgp4PathAttrMultiExitDisc + INTEGER, + bgp4PathAttrLocalPref + INTEGER, + bgp4PathAttrAtomicAggregate + INTEGER, + bgp4PathAttrAggregatorAS + INTEGER, + bgp4PathAttrAggregatorAddr + IpAddress, + bgp4PathAttrCalcLocalPref + INTEGER, + bgp4PathAttrBest + INTEGER, + bgp4PathAttrUnknown + OCTET STRING + } + + bgp4PathAttrPeer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the peer where the path + information was learned." + ::= { bgp4PathAttrEntry 1 } + bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE + SYNTAX INTEGER (0..32) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Length in bits of the IP address prefix in the + Network Layer Reachability Information field." + ::= { bgp4PathAttrEntry 2 } + + bgp4PathAttrIpAddrPrefix OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An IP address prefix in the Network Layer + Reachability Information field. This object + is an IP address containing the prefix with + length specified by bgp4PathAttrIpAddrPrefixLen. + Any bits beyond the length specified by + bgp4PathAttrIpAddrPrefixLen are zeroed." + ::= { bgp4PathAttrEntry 3 } + + bgp4PathAttrOrigin OBJECT-TYPE + SYNTAX INTEGER { + igp(1),-- networks are interior + egp(2),-- networks learned via EGP + incomplete(3) -- undetermined + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ultimate origin of the path information." + ::= { bgp4PathAttrEntry 4 } + + bgp4PathAttrASPathSegment OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (2..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence of AS path segments. Each AS + path segment is represented by a triple + <type, length, value>. + + The type is a 1-octet field which has two + possible values: + 1 AS_SET: unordered set of ASs a + route in the UPDATE message + has traversed + 2 AS_SEQUENCE: ordered set of ASs + a route in the UPDATE message + has traversed. + + The length is a 1-octet field containing the + number of ASs in the value field. + + The value field contains one or more AS + numbers, each AS is represented in the octet + string as a pair of octets according to the + following algorithm: + + first-byte-of-pair = ASNumber / 256; + second-byte-of-pair = ASNumber & 255;" + ::= { bgp4PathAttrEntry 5 } + + bgp4PathAttrNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The address of the border router that should + be used for the destination network." + ::= { bgp4PathAttrEntry 6 } + + bgp4PathAttrMultiExitDisc OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This metric is used to discriminate between + multiple exit points to an adjacent autonomous + system. A value of -1 indicates the absence of + this attribute." + ::= { bgp4PathAttrEntry 7 } + + bgp4PathAttrLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The originating BGP4 speaker's degree of + preference for an advertised route. A value of + -1 indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 8 } + + bgp4PathAttrAtomicAggregate OBJECT-TYPE + SYNTAX INTEGER { + lessSpecificRrouteNotSelected(1), + lessSpecificRouteSelected(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Whether or not a system has selected + a less specific route without selecting a + more specific route." + ::= { bgp4PathAttrEntry 9 } + + bgp4PathAttrAggregatorAS OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The AS number of the last BGP4 speaker that + performed route aggregation. A value of zero (0) + indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 10 } + + bgp4PathAttrAggregatorAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of the last BGP4 speaker that + performed route aggregation. A value of + 0.0.0.0 indicates the absence of this attribute." + ::= { bgp4PathAttrEntry 11 } + + bgp4PathAttrCalcLocalPref OBJECT-TYPE + SYNTAX INTEGER (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The degree of preference calculated by the + receiving BGP4 speaker for an advertised route. + A value of -1 indicates the absence of this + attribute." + ::= { bgp4PathAttrEntry 12 } + + bgp4PathAttrBest OBJECT-TYPE + SYNTAX INTEGER { + false(1),-- not chosen as best route + true(2) -- chosen as best route + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of whether or not this route + was chosen as the best BGP4 route." + ::= { bgp4PathAttrEntry 13 } + + bgp4PathAttrUnknown OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..255)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "One or more path attributes not understood + by this BGP4 speaker. Size zero (0) indicates + the absence of such attribute(s). Octets + beyond the maximum size, if any, are not + recorded by this object." + ::= { bgp4PathAttrEntry 14 } + + + -- Traps. + + -- note that in RFC 1657, bgpTraps was incorrectly + -- assigned a value of { bgp 7 }, and each of the + -- traps had the bgpPeerRemoteAddr object inappropriately + -- removed from their OBJECTS clause. The following + -- definitions restore the semantics of the traps as + -- they were initially defined in RFC 1269. + + -- { bgp 7 } is unused + + bgpTraps OBJECT IDENTIFIER ::= { bgp 0 } + + bgpEstablished NOTIFICATION-TYPE + OBJECTS { bgpPeerRemoteAddr, + bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGP Established event is generated when + the BGP FSM enters the ESTABLISHED state." + ::= { bgpTraps 1 } + + bgpBackwardTransition NOTIFICATION-TYPE + OBJECTS { bgpPeerRemoteAddr, + bgpPeerLastError, + bgpPeerState } + STATUS current + DESCRIPTION + "The BGPBackwardTransition Event is generated + when the BGP FSM moves from a higher numbered + state to a lower numbered state." + ::= { bgpTraps 2 } + + -- conformance information + + bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 } + bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 } + bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 } + + -- compliance statements + + bgpMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which + implement the BGP4 mib." + MODULE -- this module + MANDATORY-GROUPS { bgp4MIBGlobalsGroup, + bgp4MIBPeerGroup, + bgp4MIBPathAttrGroup, + bgp4MIBNotificationGroup } + ::= { bgpMIBCompliances 1 } + + -- units of conformance + + bgp4MIBGlobalsGroup OBJECT-GROUP + OBJECTS { bgpVersion, + bgpLocalAs, + bgpIdentifier } + STATUS current + DESCRIPTION + "A collection of objects providing information + on global BGP state." + ::= { bgpMIBGroups 1 } + + bgp4MIBPeerGroup OBJECT-GROUP + OBJECTS { bgpPeerIdentifier, + bgpPeerState, + bgpPeerAdminStatus, + bgpPeerNegotiatedVersion, + bgpPeerLocalAddr, + bgpPeerLocalPort, + bgpPeerRemoteAddr, + bgpPeerRemotePort, + bgpPeerRemoteAs, + bgpPeerInUpdates, + bgpPeerOutUpdates, + bgpPeerInTotalMessages, + bgpPeerOutTotalMessages, + bgpPeerLastError, + bgpPeerFsmEstablishedTransitions, + bgpPeerFsmEstablishedTime, + bgpPeerConnectRetryInterval, + bgpPeerHoldTime, + bgpPeerKeepAlive, + bgpPeerHoldTimeConfigured, + bgpPeerKeepAliveConfigured, + bgpPeerMinASOriginationInterval, + bgpPeerMinRouteAdvertisementInterval, + bgpPeerInUpdateElapsedTime } + STATUS current + DESCRIPTION + "A collection of objects for managing + BGP peers." + ::= { bgpMIBGroups 2 } + + bgp4MIBRcvdPathAttrGroup OBJECT-GROUP + OBJECTS { bgpPathAttrPeer, + bgpPathAttrDestNetwork, + bgpPathAttrOrigin, + bgpPathAttrASPath, + bgpPathAttrNextHop, + bgpPathAttrInterASMetric } + STATUS obsolete + DESCRIPTION + "A collection of objects for managing BGP + path entries. + + This conformance group is obsolete, + replaced by bgp4MIBPathAttrGroup." + ::= { bgpMIBGroups 3 } + + bgp4MIBPathAttrGroup OBJECT-GROUP + OBJECTS { bgp4PathAttrPeer, + bgp4PathAttrIpAddrPrefixLen, + bgp4PathAttrIpAddrPrefix, + bgp4PathAttrOrigin, + bgp4PathAttrASPathSegment, + bgp4PathAttrNextHop, + bgp4PathAttrMultiExitDisc, + bgp4PathAttrLocalPref, + bgp4PathAttrAtomicAggregate, + bgp4PathAttrAggregatorAS, + bgp4PathAttrAggregatorAddr, + bgp4PathAttrCalcLocalPref, + bgp4PathAttrBest, + bgp4PathAttrUnknown } + STATUS current + DESCRIPTION + "A collection of objects for managing + BGP path entries." + ::= { bgpMIBGroups 4 } + + bgp4MIBNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { bgpEstablished, + bgpBackwardTransition } + STATUS current + DESCRIPTION + "A collection of notifications for signaling + changes in BGP peer relationships." + ::= { bgpMIBGroups 5 } + + END

Added: trunk/mibs/DISMAN-EVENT-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/DISMAN-EVENT-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,1955 @@ +DISMAN-EVENT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Unsigned32, + NOTIFICATION-TYPE, Counter32, + Gauge32, mib-2, zeroDotZero FROM SNMPv2-SMI + TEXTUAL-CONVENTION, RowStatus, + TruthValue FROM SNMPv2-TC + + + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + sysUpTime FROM SNMPv2-MIB + SnmpTagValue FROM SNMP-TARGET-MIB + SnmpAdminString FROM SNMP-FRAMEWORK-MIB; + +dismanEventMIB MODULE-IDENTITY + LAST-UPDATED "200010160000Z" -- 16 October 2000 + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO "Ramanathan Kavasseri + Cisco Systems, Inc. + 170 West Tasman Drive, + San Jose CA 95134-1706. + Phone: +1 408 526 4527 + Email: ramk@cisco.com" + DESCRIPTION + "The MIB module for defining event triggers and actions + for network management purposes." +-- Revision History + + REVISION "200010160000Z" -- 16 October 2000 + DESCRIPTION "This is the initial version of this MIB. + Published as RFC 2981" + ::= { mib-2 88 } + +dismanEventMIBObjects OBJECT IDENTIFIER ::= { dismanEventMIB 1 } + +-- Management Triggered Event (MTE) objects + +mteResource OBJECT IDENTIFIER ::= { dismanEventMIBObjects 1 } +mteTrigger OBJECT IDENTIFIER ::= { dismanEventMIBObjects 2 } +mteObjects OBJECT IDENTIFIER ::= { dismanEventMIBObjects 3 } +mteEvent OBJECT IDENTIFIER ::= { dismanEventMIBObjects 4 } + +-- +-- Textual Conventions +-- + +FailureReason ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Reasons for failures in an attempt to perform a management + request. + + The first group of errors, numbered less than 0, are related + to problems in sending the request. The existence of a + particular error code here does not imply that all + implementations are capable of sensing that error and + + + returning that code. + + The second group, numbered greater than 0, are copied + directly from SNMP protocol operations and are intended to + carry exactly the meanings defined for the protocol as returned + in an SNMP response. + + localResourceLack some local resource such as memory + lacking or + mteResourceSampleInstanceMaximum + exceeded + badDestination unrecognized domain name or otherwise + invalid destination address + destinationUnreachable can't get to destination address + noResponse no response to SNMP request + badType the data syntax of a retrieved object + as not as expected + sampleOverrun another sample attempt occurred before + the previous one completed" + + SYNTAX INTEGER { localResourceLack(-1), + badDestination(-2), + destinationUnreachable(-3), + noResponse(-4), + badType(-5), + sampleOverrun(-6), + + noError(0), + + tooBig(1), + noSuchName(2), + badValue(3), + readOnly(4), + genErr(5), + noAccess(6), + wrongType(7), + wrongLength(8), + wrongEncoding(9), + wrongValue(10), + noCreation(11), + inconsistentValue(12), + resourceUnavailable(13), + commitFailed(14), + undoFailed(15), + authorizationError(16), + notWritable(17), + inconsistentName(18) } +-- + + +-- Resource Control Section +-- + +mteResourceSampleMinimum OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum mteTriggerFrequency this system will + accept. A system may use the larger values of this minimum to + lessen the impact of constant sampling. For larger + sampling intervals the system samples less often and + suffers less overhead. This object provides a way to enforce + such lower overhead for all triggers created after it is + set. + + Unless explicitly resource limited, a system's value for + this object SHOULD be 1, allowing as small as a 1 second + interval for ongoing trigger sampling. + + Changing this value will not invalidate an existing setting + of mteTriggerFrequency." + ::= { mteResource 1 } + +mteResourceSampleInstanceMaximum OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "instances" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of instance entries this system will + support for sampling. + + These are the entries that maintain state, one for each + instance of each sampled object as selected by + mteTriggerValueID. Note that wildcarded objects result + in multiple instances of this state. + + A value of 0 indicates no preset limit, that is, the limit + is dynamic based on system operation and resources. + + Unless explicitly resource limited, a system's value for + this object SHOULD be 0. + + Changing this value will not eliminate or inhibit existing + sample state but could prevent allocation of additional state + information." + + + ::= { mteResource 2 } + +mteResourceSampleInstances OBJECT-TYPE + SYNTAX Gauge32 + UNITS "instances" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of currently active instance entries as + defined for mteResourceSampleInstanceMaximum." + ::= { mteResource 3 } + +mteResourceSampleInstancesHigh OBJECT-TYPE + SYNTAX Gauge32 + UNITS "instances" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The highest value of mteResourceSampleInstances that has + occurred since initialization of the management system." + ::= { mteResource 4 } + +mteResourceSampleInstanceLacks OBJECT-TYPE + SYNTAX Counter32 + UNITS "instances" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this system could not take a new sample + because that allocation would have exceeded the limit set by + mteResourceSampleInstanceMaximum." + ::= { mteResource 5 } + +-- +-- Trigger Section +-- + +-- Counters + +mteTriggerFailures OBJECT-TYPE + SYNTAX Counter32 + UNITS "failures" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times an attempt to check for a trigger + condition has failed. This counts individually for each + attempt in a group of targets or each attempt for a + + + wildcarded object." + ::= { mteTrigger 1 } + +-- +-- Trigger Table +-- + +mteTriggerTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteTriggerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event trigger information." + ::= { mteTrigger 2 } + +mteTriggerEntry OBJECT-TYPE + SYNTAX MteTriggerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single trigger. Applications create and + delete entries using mteTriggerEntryStatus." + INDEX { mteOwner, IMPLIED mteTriggerName } + ::= { mteTriggerTable 1 } + +MteTriggerEntry ::= SEQUENCE { + mteOwner SnmpAdminString, + mteTriggerName SnmpAdminString, + mteTriggerComment SnmpAdminString, + mteTriggerTest BITS, + mteTriggerSampleType INTEGER, + mteTriggerValueID OBJECT IDENTIFIER, + mteTriggerValueIDWildcard TruthValue, + mteTriggerTargetTag SnmpTagValue, + mteTriggerContextName SnmpAdminString, + mteTriggerContextNameWildcard TruthValue, + mteTriggerFrequency Unsigned32, + mteTriggerObjectsOwner SnmpAdminString, + mteTriggerObjects SnmpAdminString, + mteTriggerEnabled TruthValue, + mteTriggerEntryStatus RowStatus +} + +mteOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + + "The owner of this entry. The exact semantics of this + string are subject to the security policy defined by the + security administrator." + ::= { mteTriggerEntry 1 } + +mteTriggerName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A locally-unique, administratively assigned name for the + trigger within the scope of mteOwner." + ::= { mteTriggerEntry 2 } + +mteTriggerComment OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A description of the trigger's function and use." + DEFVAL { ''H } + ::= { mteTriggerEntry 3 } + +mteTriggerTest OBJECT-TYPE + SYNTAX BITS { existence(0), boolean(1), threshold(2) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of trigger test to perform. For 'boolean' and + 'threshold' tests, the object at mteTriggerValueID MUST + evaluate to an integer, that is, anything that ends up encoded + for transmission (that is, in BER, not ASN.1) as an integer. + + For 'existence', the specific test is as selected by + mteTriggerExistenceTest. When an object appears, vanishes + or changes value, the trigger fires. If the object's + appearance caused the trigger firing, the object MUST + vanish before the trigger can be fired again for it, and + vice versa. If the trigger fired due to a change in the + object's value, it will be fired again on every successive + value change for that object. + + For 'boolean', the specific test is as selected by + mteTriggerBooleanTest. If the test result is true the trigger + fires. The trigger will not fire again until the value has + become false and come back to true. + + For 'threshold' the test works as described below for + + + mteTriggerThresholdStartup, mteTriggerThresholdRising, and + mteTriggerThresholdFalling. + + Note that combining 'boolean' and 'threshold' tests on the + same object may be somewhat redundant." + DEFVAL { { boolean } } + ::= { mteTriggerEntry 4 } + +mteTriggerSampleType OBJECT-TYPE + SYNTAX INTEGER { absoluteValue(1), deltaValue(2) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of sampling to perform. + + An 'absoluteValue' sample requires only a single sample to be + meaningful, and is exactly the value of the object at + mteTriggerValueID at the sample time. + + A 'deltaValue' requires two samples to be meaningful and is + thus not available for testing until the second and subsequent + samples after the object at mteTriggerValueID is first found + to exist. It is the difference between the two samples. For + unsigned values it is always positive, based on unsigned + arithmetic. For signed values it can be positive or negative. + + For SNMP counters to be meaningful they should be sampled as a + 'deltaValue'. + + For 'deltaValue' mteTriggerDeltaTable contains further + parameters. + + If only 'existence' is set in mteTriggerTest this object has + no meaning." + DEFVAL { absoluteValue } + ::= { mteTriggerEntry 5 } + +mteTriggerValueID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object identifier of the MIB object to sample to see + if the trigger should fire. + + This may be wildcarded by truncating all or part of the + instance portion, in which case the value is obtained + as if with a GetNext function, checking multiple values + + + if they exist. If such wildcarding is applied, + mteTriggerValueIDWildcard must be 'true' and if not it must + be 'false'. + + Bad object identifiers or a mismatch between truncating the + identifier and the value of mteTriggerValueIDWildcard result + in operation as one would expect when providing the wrong + identifier to a Get or GetNext operation. The Get will fail + or get the wrong object. The GetNext will indeed get whatever + is next, proceeding until it runs past the initial part of the + identifier and perhaps many unintended objects for confusing + results. If the value syntax of those objects is not usable, + that results in a 'badType' error that terminates the scan. + + Each instance that fills the wildcard is independent of any + additional instances, that is, wildcarded objects operate + as if there were a separate table entry for each instance + that fills the wildcard without having to actually predict + all possible instances ahead of time." + DEFVAL { zeroDotZero } + ::= { mteTriggerEntry 6 } + +mteTriggerValueIDWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Control for whether mteTriggerValueID is to be treated as + fully-specified or wildcarded, with 'true' indicating wildcard." + DEFVAL { false } + ::= { mteTriggerEntry 7 } + +mteTriggerTargetTag OBJECT-TYPE + SYNTAX SnmpTagValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The tag for the target(s) from which to obtain the condition + for a trigger check. + + A length of 0 indicates the local system. In this case, + access to the objects indicated by mteTriggerValueID is under + the security credentials of the requester that set + mteTriggerEntryStatus to 'active'. Those credentials are the + input parameters for isAccessAllowed from the Architecture for + Describing SNMP Management Frameworks. + + Otherwise access rights are checked according to the security + + + parameters resulting from the tag." + DEFVAL { ''H } + ::= { mteTriggerEntry 8 } + +mteTriggerContextName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The management context from which to obtain mteTriggerValueID. + + This may be wildcarded by leaving characters off the end. For + example use 'Repeater' to wildcard to 'Repeater1', + 'Repeater2', 'Repeater-999.87b', and so on. To indicate such + wildcarding is intended, mteTriggerContextNameWildcard must + be 'true'. + + Each instance that fills the wildcard is independent of any + additional instances, that is, wildcarded objects operate + as if there were a separate table entry for each instance + that fills the wildcard without having to actually predict + all possible instances ahead of time. + + Operation of this feature assumes that the local system has a + list of available contexts against which to apply the + wildcard. If the objects are being read from the local + system, this is clearly the system's own list of contexts. + For a remote system a local version of such a list is not + defined by any current standard and may not be available, so + this function MAY not be supported." + DEFVAL { ''H } + ::= { mteTriggerEntry 9 } + +mteTriggerContextNameWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Control for whether mteTriggerContextName is to be treated as + fully-specified or wildcarded, with 'true' indicating wildcard." + DEFVAL { false } + ::= { mteTriggerEntry 10 } + +mteTriggerFrequency OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + + + DESCRIPTION + "The number of seconds to wait between trigger samples. To + encourage consistency in sampling, the interval is measured + from the beginning of one check to the beginning of the next + and the timer is restarted immediately when it expires, not + when the check completes. + + If the next sample begins before the previous one completed the + system may either attempt to make the check or treat this as an + error condition with the error 'sampleOverrun'. + + A frequency of 0 indicates instantaneous recognition of the + condition. This is not possible in many cases, but may + be supported in cases where it makes sense and the system is + able to do so. This feature allows the MIB to be used in + implementations where such interrupt-driven behavior is + possible and is not likely to be supported for all MIB objects + even then since such sampling generally has to be tightly + integrated into low-level code. + + Systems that can support this SHOULD document those cases + where it can be used. In cases where it can not, setting this + object to 0 should be disallowed." + DEFVAL { 600 } + ::= { mteTriggerEntry 11 } + +mteTriggerObjectsOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "To go with mteTriggerObjects, the mteOwner of a group of + objects from mteObjectsTable." + DEFVAL { ''H } + ::= { mteTriggerEntry 12 } + +mteTriggerObjects OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mteObjectsName of a group of objects from + mteObjectsTable. These objects are to be added to any + Notification resulting from the firing of this trigger. + + A list of objects may also be added based on the event or on + the value of mteTriggerTest. + + + + A length of 0 indicates no additional objects." + DEFVAL { ''H } + ::= { mteTriggerEntry 13 } + +mteTriggerEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control to allow a trigger to be configured but not used. + When the value is 'false' the trigger is not sampled." + DEFVAL { false } + ::= { mteTriggerEntry 14 } + +mteTriggerEntryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The control that allows creation and deletion of entries. + Once made active an entry may not be modified except to + delete it." + ::= { mteTriggerEntry 15 } + +-- +-- Trigger Delta Table +-- + +mteTriggerDeltaTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteTriggerDeltaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event trigger information for delta + sampling." + ::= { mteTrigger 3 } + +mteTriggerDeltaEntry OBJECT-TYPE + SYNTAX MteTriggerDeltaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single trigger's delta sampling. Entries + automatically exist in this this table for each mteTriggerEntry + that has mteTriggerSampleType set to 'deltaValue'." + INDEX { mteOwner, IMPLIED mteTriggerName } + ::= { mteTriggerDeltaTable 1 } + + + +MteTriggerDeltaEntry ::= SEQUENCE { + mteTriggerDeltaDiscontinuityID OBJECT IDENTIFIER, + mteTriggerDeltaDiscontinuityIDWildcard TruthValue, + mteTriggerDeltaDiscontinuityIDType INTEGER +} + +sysUpTimeInstance OBJECT IDENTIFIER ::= { sysUpTime 0 } + +mteTriggerDeltaDiscontinuityID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The OBJECT IDENTIFIER (OID) of a TimeTicks, TimeStamp, or + DateAndTime object that indicates a discontinuity in the value + at mteTriggerValueID. + + The OID may be for a leaf object (e.g. sysUpTime.0) or may + be wildcarded to match mteTriggerValueID. + + This object supports normal checking for a discontinuity in a + counter. Note that if this object does not point to sysUpTime + discontinuity checking MUST still check sysUpTime for an overall + discontinuity. + + If the object identified is not accessible the sample attempt + is in error, with the error code as from an SNMP request. + + Bad object identifiers or a mismatch between truncating the + identifier and the value of mteDeltaDiscontinuityIDWildcard + result in operation as one would expect when providing the + wrong identifier to a Get operation. The Get will fail or get + the wrong object. If the value syntax of those objects is not + usable, that results in an error that terminates the sample + with a 'badType' error code." + DEFVAL { sysUpTimeInstance } + ::= { mteTriggerDeltaEntry 1 } + +mteTriggerDeltaDiscontinuityIDWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for whether mteTriggerDeltaDiscontinuityID is to be + treated as fully-specified or wildcarded, with 'true' + indicating wildcard. Note that the value of this object will + be the same as that of the corresponding instance of + mteTriggerValueIDWildcard when the corresponding + + + mteTriggerSampleType is 'deltaValue'." + DEFVAL { false } + ::= { mteTriggerDeltaEntry 2 } + +mteTriggerDeltaDiscontinuityIDType OBJECT-TYPE + SYNTAX INTEGER { timeTicks(1), timeStamp(2), dateAndTime(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value 'timeTicks' indicates the + mteTriggerDeltaDiscontinuityID of this row is of syntax + TimeTicks. The value 'timeStamp' indicates syntax TimeStamp. + The value 'dateAndTime' indicates syntax DateAndTime." + DEFVAL { timeTicks } + ::= { mteTriggerDeltaEntry 3 } + +-- +-- Trigger Existence Table +-- + +mteTriggerExistenceTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteTriggerExistenceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event trigger information for existence + triggers." + ::= { mteTrigger 4 } + +mteTriggerExistenceEntry OBJECT-TYPE + SYNTAX MteTriggerExistenceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single existence trigger. Entries + automatically exist in this this table for each mteTriggerEntry + that has 'existence' set in mteTriggerTest." + INDEX { mteOwner, IMPLIED mteTriggerName } + ::= { mteTriggerExistenceTable 1 } + +MteTriggerExistenceEntry ::= SEQUENCE { + mteTriggerExistenceTest BITS, + mteTriggerExistenceStartup BITS, + mteTriggerExistenceObjectsOwner SnmpAdminString, + mteTriggerExistenceObjects SnmpAdminString, + mteTriggerExistenceEventOwner SnmpAdminString, + mteTriggerExistenceEvent SnmpAdminString +} + + +mteTriggerExistenceTest OBJECT-TYPE + SYNTAX BITS { present(0), absent(1), changed(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of existence test to perform. The trigger fires + when the object at mteTriggerValueID is seen to go from + present to absent, from absent to present, or to have it's + value changed, depending on which tests are selected: + + present(0) - when this test is selected, the trigger fires + when the mteTriggerValueID object goes from absent to present. + + absent(1) - when this test is selected, the trigger fires + when the mteTriggerValueID object goes from present to absent. + changed(2) - when this test is selected, the trigger fires + the mteTriggerValueID object value changes. + + Once the trigger has fired for either presence or absence it + will not fire again for that state until the object has been + to the other state. " + DEFVAL { { present, absent } } + ::= { mteTriggerExistenceEntry 1 } + +mteTriggerExistenceStartup OBJECT-TYPE + SYNTAX BITS { present(0), absent(1) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for whether an event may be triggered when this entry + is first set to 'active' and the test specified by + mteTriggerExistenceTest is true. Setting an option causes + that trigger to fire when its test is true." + DEFVAL { { present, absent } } + ::= { mteTriggerExistenceEntry 2 } + +mteTriggerExistenceObjectsOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerExistenceObjects, the mteOwner of a + group of objects from mteObjectsTable." + DEFVAL { ''H } + ::= { mteTriggerExistenceEntry 3 } + +mteTriggerExistenceObjects OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + + + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteObjectsName of a group of objects from + mteObjectsTable. These objects are to be added to any + Notification resulting from the firing of this trigger for + this test. + + A list of objects may also be added based on the overall + trigger, the event or other settings in mteTriggerTest. + + A length of 0 indicates no additional objects." + DEFVAL { ''H } + ::= { mteTriggerExistenceEntry 4 } + +mteTriggerExistenceEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerExistenceEvent, the mteOwner of an event + entry from the mteEventTable." + DEFVAL { ''H } + ::= { mteTriggerExistenceEntry 5 } + +mteTriggerExistenceEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'existence' and this trigger fires. A length of 0 indicates no + event." + DEFVAL { ''H } + ::= { mteTriggerExistenceEntry 6 } + +-- +-- Trigger Boolean Table +-- + +mteTriggerBooleanTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteTriggerBooleanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event trigger information for boolean + triggers." + ::= { mteTrigger 5 } + + +mteTriggerBooleanEntry OBJECT-TYPE + SYNTAX MteTriggerBooleanEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single boolean trigger. Entries + automatically exist in this this table for each mteTriggerEntry + that has 'boolean' set in mteTriggerTest." + INDEX { mteOwner, IMPLIED mteTriggerName } + ::= { mteTriggerBooleanTable 1 } + +MteTriggerBooleanEntry ::= SEQUENCE { + mteTriggerBooleanComparison INTEGER, + mteTriggerBooleanValue Integer32, + mteTriggerBooleanStartup TruthValue, + mteTriggerBooleanObjectsOwner SnmpAdminString, + mteTriggerBooleanObjects SnmpAdminString, + mteTriggerBooleanEventOwner SnmpAdminString, + mteTriggerBooleanEvent SnmpAdminString +} + +mteTriggerBooleanComparison OBJECT-TYPE + SYNTAX INTEGER { unequal(1), equal(2), + less(3), lessOrEqual(4), + greater(5), greaterOrEqual(6) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The type of boolean comparison to perform. + + The value at mteTriggerValueID is compared to + mteTriggerBooleanValue, so for example if + mteTriggerBooleanComparison is 'less' the result would be true + if the value at mteTriggerValueID is less than the value of + mteTriggerBooleanValue." + DEFVAL { unequal } + ::= { mteTriggerBooleanEntry 1 } + +mteTriggerBooleanValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value to use for the test specified by + mteTriggerBooleanTest." + DEFVAL { 0 } + ::= { mteTriggerBooleanEntry 2 } + + + +mteTriggerBooleanStartup OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for whether an event may be triggered when this entry + is first set to 'active' or a new instance of the object at + mteTriggerValueID is found and the test specified by + mteTriggerBooleanComparison is true. In that case an event is + triggered if mteTriggerBooleanStartup is 'true'." + DEFVAL { true } + ::= { mteTriggerBooleanEntry 3 } + +mteTriggerBooleanObjectsOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerBooleanObjects, the mteOwner of a group + of objects from mteObjectsTable." + DEFVAL { ''H } + ::= { mteTriggerBooleanEntry 4 } + +mteTriggerBooleanObjects OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteObjectsName of a group of objects from + mteObjectsTable. These objects are to be added to any + Notification resulting from the firing of this trigger for + this test. + + A list of objects may also be added based on the overall + trigger, the event or other settings in mteTriggerTest. + + A length of 0 indicates no additional objects." + DEFVAL { ''H } + ::= { mteTriggerBooleanEntry 5 } + +mteTriggerBooleanEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerBooleanEvent, the mteOwner of an event + entry from mteEventTable." + DEFVAL { ''H } + + + ::= { mteTriggerBooleanEntry 6 } + +mteTriggerBooleanEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'boolean' and this trigger fires. A length of 0 indicates no + event." + DEFVAL { ''H } + ::= { mteTriggerBooleanEntry 7 } + +-- +-- Trigger Threshold Table +-- + +mteTriggerThresholdTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteTriggerThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event trigger information for threshold + triggers." + ::= { mteTrigger 6 } + +mteTriggerThresholdEntry OBJECT-TYPE + SYNTAX MteTriggerThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single threshold trigger. Entries + automatically exist in this table for each mteTriggerEntry + that has 'threshold' set in mteTriggerTest." + INDEX { mteOwner, IMPLIED mteTriggerName } + ::= { mteTriggerThresholdTable 1 } + +MteTriggerThresholdEntry ::= SEQUENCE { + mteTriggerThresholdStartup INTEGER, + mteTriggerThresholdRising Integer32, + mteTriggerThresholdFalling Integer32, + mteTriggerThresholdDeltaRising Integer32, + mteTriggerThresholdDeltaFalling Integer32, + mteTriggerThresholdObjectsOwner SnmpAdminString, + mteTriggerThresholdObjects SnmpAdminString, + mteTriggerThresholdRisingEventOwner SnmpAdminString, + mteTriggerThresholdRisingEvent SnmpAdminString, + mteTriggerThresholdFallingEventOwner SnmpAdminString, + + + mteTriggerThresholdFallingEvent SnmpAdminString, + mteTriggerThresholdDeltaRisingEventOwner SnmpAdminString, + mteTriggerThresholdDeltaRisingEvent SnmpAdminString, + mteTriggerThresholdDeltaFallingEventOwner SnmpAdminString, + mteTriggerThresholdDeltaFallingEvent SnmpAdminString +} + +mteTriggerThresholdStartup OBJECT-TYPE + SYNTAX INTEGER { rising(1), falling(2), risingOrFalling(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The event that may be triggered when this entry is first + set to 'active' and a new instance of the object at + mteTriggerValueID is found. If the first sample after this + instance becomes active is greater than or equal to + mteTriggerThresholdRising and mteTriggerThresholdStartup is + equal to 'rising' or 'risingOrFalling', then one + mteTriggerThresholdRisingEvent is triggered for that instance. + If the first sample after this entry becomes active is less + than or equal to mteTriggerThresholdFalling and + mteTriggerThresholdStartup is equal to 'falling' or + 'risingOrFalling', then one mteTriggerThresholdRisingEvent is + triggered for that instance." + DEFVAL { risingOrFalling } + ::= { mteTriggerThresholdEntry 1 } + +mteTriggerThresholdRising OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A threshold value to check against if mteTriggerType is + 'threshold'. + + When the current sampled value is greater than or equal to + this threshold, and the value at the last sampling interval + was less than this threshold, one + mteTriggerThresholdRisingEvent is triggered. That event is + also triggered if the first sample after this entry becomes + active is greater than or equal to this threshold and + mteTriggerThresholdStartup is equal to 'rising' or + 'risingOrFalling'. + + After a rising event is generated, another such event is not + triggered until the sampled value falls below this threshold + and reaches mteTriggerThresholdFalling." + DEFVAL { 0 } + + + ::= { mteTriggerThresholdEntry 2 } + +mteTriggerThresholdFalling OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A threshold value to check against if mteTriggerType is + 'threshold'. + + When the current sampled value is less than or equal to this + threshold, and the value at the last sampling interval was + greater than this threshold, one + mteTriggerThresholdFallingEvent is triggered. That event is + also triggered if the first sample after this entry becomes + active is less than or equal to this threshold and + mteTriggerThresholdStartup is equal to 'falling' or + 'risingOrFalling'. + + After a falling event is generated, another such event is not + triggered until the sampled value rises above this threshold + and reaches mteTriggerThresholdRising." + DEFVAL { 0 } + ::= { mteTriggerThresholdEntry 3 } + +mteTriggerThresholdDeltaRising OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A threshold value to check against if mteTriggerType is + 'threshold'. + + When the delta value (difference) between the current sampled + value (value(n)) and the previous sampled value (value(n-1)) + is greater than or equal to this threshold, + and the delta value calculated at the last sampling interval + (i.e. value(n-1) - value(n-2)) was less than this threshold, + one mteTriggerThresholdDeltaRisingEvent is triggered. That event + is also triggered if the first delta value calculated after this + entry becomes active, i.e. value(2) - value(1), where value(1) + is the first sample taken of that instance, is greater than or + equal to this threshold. + + After a rising event is generated, another such event is not + triggered until the delta value falls below this threshold and + reaches mteTriggerThresholdDeltaFalling." + DEFVAL { 0 } + + + ::= { mteTriggerThresholdEntry 4 } + +mteTriggerThresholdDeltaFalling OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A threshold value to check against if mteTriggerType is + 'threshold'. + + When the delta value (difference) between the current sampled + value (value(n)) and the previous sampled value (value(n-1)) + is less than or equal to this threshold, + and the delta value calculated at the last sampling interval + (i.e. value(n-1) - value(n-2)) was greater than this threshold, + one mteTriggerThresholdDeltaFallingEvent is triggered. That event + is also triggered if the first delta value calculated after this + entry becomes active, i.e. value(2) - value(1), where value(1) + is the first sample taken of that instance, is less than or + equal to this threshold. + + After a falling event is generated, another such event is not + triggered until the delta value falls below this threshold and + reaches mteTriggerThresholdDeltaRising." + DEFVAL { 0 } + ::= { mteTriggerThresholdEntry 5 } + +mteTriggerThresholdObjectsOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerThresholdObjects, the mteOwner of a group + of objects from mteObjectsTable." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 6 } + +mteTriggerThresholdObjects OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteObjectsName of a group of objects from + mteObjectsTable. These objects are to be added to any + Notification resulting from the firing of this trigger for + this test. + + A list of objects may also be added based on the overall + + + trigger, the event or other settings in mteTriggerTest. + + A length of 0 indicates no additional objects." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 7 } + +mteTriggerThresholdRisingEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerThresholdRisingEvent, the mteOwner of an + event entry from mteEventTable." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 8 } + +mteTriggerThresholdRisingEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'threshold' and this trigger fires based on + mteTriggerThresholdRising. A length of 0 indicates no event." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 9 } + +mteTriggerThresholdFallingEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerThresholdFallingEvent, the mteOwner of an + event entry from mteEventTable." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 10 } + +mteTriggerThresholdFallingEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'threshold' and this trigger fires based on + mteTriggerThresholdFalling. A length of 0 indicates no event." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 11 } + + + +mteTriggerThresholdDeltaRisingEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerThresholdDeltaRisingEvent, the mteOwner + of an event entry from mteEventTable." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 12 } + +mteTriggerThresholdDeltaRisingEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'threshold' and this trigger fires based on + mteTriggerThresholdDeltaRising. A length of 0 indicates + no event." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 13 } + +mteTriggerThresholdDeltaFallingEventOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteTriggerThresholdDeltaFallingEvent, the mteOwner + of an event entry from mteEventTable." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 14 } + +mteTriggerThresholdDeltaFallingEvent OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteEventName of the event to invoke when mteTriggerType is + 'threshold' and this trigger fires based on + mteTriggerThresholdDeltaFalling. A length of 0 indicates + no event." + DEFVAL { ''H } + ::= { mteTriggerThresholdEntry 15 } + +-- +-- Objects Table +-- + + + +mteObjectsTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteObjectsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of objects that can be added to notifications based + on the trigger, trigger test, or event, as pointed to by + entries in those tables." + ::= { mteObjects 1 } + +mteObjectsEntry OBJECT-TYPE + SYNTAX MteObjectsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A group of objects. Applications create and delete entries + using mteObjectsEntryStatus. + + When adding objects to a notification they are added in the + lexical order of their index in this table. Those associated + with a trigger come first, then trigger test, then event." + INDEX { mteOwner, mteObjectsName, mteObjectsIndex } + ::= { mteObjectsTable 1 } + +MteObjectsEntry ::= SEQUENCE { + mteObjectsName SnmpAdminString, + mteObjectsIndex Unsigned32, + mteObjectsID OBJECT IDENTIFIER, + mteObjectsIDWildcard TruthValue, + mteObjectsEntryStatus RowStatus + } + +mteObjectsName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A locally-unique, administratively assigned name for a group + of objects." + ::= { mteObjectsEntry 1 } + +mteObjectsIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An arbitrary integer for the purpose of identifying + individual objects within a mteObjectsName group. + + + Objects within a group are placed in the notification in the + numerical order of this index. + + Groups are placed in the notification in the order of the + selections for overall trigger, trigger test, and event. + Within trigger test they are in the same order as the + numerical values of the bits defined for mteTriggerTest. + + Bad object identifiers or a mismatch between truncating the + identifier and the value of mteDeltaDiscontinuityIDWildcard + result in operation as one would expect when providing the + wrong identifier to a Get operation. The Get will fail or get + the wrong object. If the object is not available it is omitted + from the notification." + ::= { mteObjectsEntry 2 } + +mteObjectsID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The object identifier of a MIB object to add to a + Notification that results from the firing of a trigger. + + This may be wildcarded by truncating all or part of the + instance portion, in which case the instance portion of the + OID for obtaining this object will be the same as that used + in obtaining the mteTriggerValueID that fired. If such + wildcarding is applied, mteObjectsIDWildcard must be + 'true' and if not it must be 'false'. + + Each instance that fills the wildcard is independent of any + additional instances, that is, wildcarded objects operate + as if there were a separate table entry for each instance + that fills the wildcard without having to actually predict + all possible instances ahead of time." + DEFVAL { zeroDotZero } + ::= { mteObjectsEntry 3 } + +mteObjectsIDWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Control for whether mteObjectsID is to be treated as + fully-specified or wildcarded, with 'true' indicating wildcard." + DEFVAL { false } + ::= { mteObjectsEntry 4 } + + +mteObjectsEntryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The control that allows creation and deletion of entries. + Once made active an entry MAY not be modified except to + delete it." + ::= { mteObjectsEntry 5 } + +-- +-- Event Section +-- + +-- Counters + +mteEventFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times an attempt to invoke an event + has failed. This counts individually for each + attempt in a group of targets or each attempt for a + wildcarded trigger object." + ::= { mteEvent 1 } + +-- +-- Event Table +-- + +mteEventTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteEventEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event action information." + ::= { mteEvent 2 } + +mteEventEntry OBJECT-TYPE + SYNTAX MteEventEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single event. Applications create and + delete entries using mteEventEntryStatus." + INDEX { mteOwner, IMPLIED mteEventName } + ::= { mteEventTable 1 } + + +MteEventEntry ::= SEQUENCE { + mteEventName SnmpAdminString, + mteEventComment SnmpAdminString, + mteEventActions BITS, + mteEventEnabled TruthValue, + mteEventEntryStatus RowStatus + } + +mteEventName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A locally-unique, administratively assigned name for the + event." + ::= { mteEventEntry 1 } + +mteEventComment OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A description of the event's function and use." + DEFVAL { ''H } + ::= { mteEventEntry 2 } + +mteEventActions OBJECT-TYPE + SYNTAX BITS { notification(0), set(1) } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The actions to perform when this event occurs. + + For 'notification', Traps and/or Informs are sent according + to the configuration in the SNMP Notification MIB. + + For 'set', an SNMP Set operation is performed according to + control values in this entry." + DEFVAL { {} } -- No bits set. + ::= { mteEventEntry 3 } + +mteEventEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control to allow an event to be configured but not used. + When the value is 'false' the event does not execute even if + + + triggered." + DEFVAL { false } + ::= { mteEventEntry 4 } + +mteEventEntryStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The control that allows creation and deletion of entries. + Once made active an entry MAY not be modified except to + delete it." + ::= { mteEventEntry 5 } + +-- +-- Event Notification Table +-- + +mteEventNotificationTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteEventNotificationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of information about notifications to be sent as a + consequence of management events." + ::= { mteEvent 3 } + +mteEventNotificationEntry OBJECT-TYPE + SYNTAX MteEventNotificationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single event's notification. Entries + automatically exist in this this table for each mteEventEntry + that has 'notification' set in mteEventActions." + INDEX { mteOwner, IMPLIED mteEventName } + ::= { mteEventNotificationTable 1 } + +MteEventNotificationEntry ::= SEQUENCE { + mteEventNotification OBJECT IDENTIFIER, + mteEventNotificationObjectsOwner SnmpAdminString, + mteEventNotificationObjects SnmpAdminString + } + +mteEventNotification OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-write + STATUS current + + + DESCRIPTION + "The object identifier from the NOTIFICATION-TYPE for the + notification to use if metEventActions has 'notification' set." + DEFVAL { zeroDotZero } + ::= { mteEventNotificationEntry 1 } + +mteEventNotificationObjectsOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To go with mteEventNotificationObjects, the mteOwner of a + group of objects from mteObjectsTable." + DEFVAL { ''H } + ::= { mteEventNotificationEntry 2 } + +mteEventNotificationObjects OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mteObjectsName of a group of objects from + mteObjectsTable if mteEventActions has 'notification' set. + These objects are to be added to any Notification generated by + this event. + + Objects may also be added based on the trigger that stimulated + the event. + + A length of 0 indicates no additional objects." + DEFVAL { ''H } + ::= { mteEventNotificationEntry 3 } + +-- +-- Event Set Table +-- + +mteEventSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF MteEventSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of management event action information." + ::= { mteEvent 4 } + +mteEventSetEntry OBJECT-TYPE + SYNTAX MteEventSetEntry + MAX-ACCESS not-accessible + + + STATUS current + DESCRIPTION + "Information about a single event's set option. Entries + automatically exist in this this table for each mteEventEntry + that has 'set' set in mteEventActions." + INDEX { mteOwner, IMPLIED mteEventName } + ::= { mteEventSetTable 1 } + +MteEventSetEntry ::= SEQUENCE { + mteEventSetObject OBJECT IDENTIFIER, + mteEventSetObjectWildcard TruthValue, + mteEventSetValue Integer32, + mteEventSetTargetTag SnmpTagValue, + mteEventSetContextName SnmpAdminString, + mteEventSetContextNameWildcard TruthValue + } + +mteEventSetObject OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object identifier from the MIB object to set if + mteEventActions has 'set' set. + + This object identifier may be wildcarded by leaving + sub-identifiers off the end, in which case + nteEventSetObjectWildCard must be 'true'. + + If mteEventSetObject is wildcarded the instance used to set the + object to which it points is the same as the instance from the + value of mteTriggerValueID that triggered the event. + + Each instance that fills the wildcard is independent of any + additional instances, that is, wildcarded objects operate + as if there were a separate table entry for each instance + that fills the wildcard without having to actually predict + all possible instances ahead of time. + + Bad object identifiers or a mismatch between truncating the + identifier and the value of mteSetObjectWildcard + result in operation as one would expect when providing the + wrong identifier to a Set operation. The Set will fail or set + the wrong object. If the value syntax of the destination + object is not correct, the Set fails with the normal SNMP + error code." + DEFVAL { zeroDotZero } + ::= { mteEventSetEntry 1 } + + +mteEventSetObjectWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control over whether mteEventSetObject is to be treated as + fully-specified or wildcarded, with 'true' indicating wildcard + if mteEventActions has 'set' set." + DEFVAL { false } + ::= { mteEventSetEntry 2 } + +mteEventSetValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value to which to set the object at mteEventSetObject + if mteEventActions has 'set' set." + DEFVAL { 0 } + ::= { mteEventSetEntry 3 } + +mteEventSetTargetTag OBJECT-TYPE + SYNTAX SnmpTagValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The tag for the target(s) at which to set the object at + mteEventSetObject to mteEventSetValue if mteEventActions + has 'set' set. + + Systems limited to self management MAY reject a non-zero + length for the value of this object. + + A length of 0 indicates the local system. In this case, + access to the objects indicated by mteEventSetObject is under + the security credentials of the requester that set + mteTriggerEntryStatus to 'active'. Those credentials are the + input parameters for isAccessAllowed from the Architecture for + Describing SNMP Management Frameworks. + + Otherwise access rights are checked according to the security + parameters resulting from the tag." + DEFVAL { ''H } + ::= { mteEventSetEntry 4 } + +mteEventSetContextName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-write + + + STATUS current + DESCRIPTION + "The management context in which to set mteEventObjectID. + if mteEventActions has 'set' set. + + This may be wildcarded by leaving characters off the end. To + indicate such wildcarding mteEventSetContextNameWildcard must + be 'true'. + + If this context name is wildcarded the value used to complete + the wildcarding of mteTriggerContextName will be appended." + DEFVAL { ''H } + ::= { mteEventSetEntry 5 } + +mteEventSetContextNameWildcard OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Control for whether mteEventSetContextName is to be treated as + fully-specified or wildcarded, with 'true' indicating wildcard + if mteEventActions has 'set' set." + DEFVAL { false } + ::= { mteEventSetEntry 6 } + +-- +-- Notifications +-- + +dismanEventMIBNotificationPrefix OBJECT IDENTIFIER ::= + { dismanEventMIB 2 } +dismanEventMIBNotifications OBJECT IDENTIFIER ::= + { dismanEventMIBNotificationPrefix 0 } +dismanEventMIBNotificationObjects OBJECT IDENTIFIER + ::= { dismanEventMIBNotificationPrefix 1 } + +-- +-- Notification Objects +-- + +mteHotTrigger OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The name of the trigger causing the notification." + ::= { dismanEventMIBNotificationObjects 1 } + + + +mteHotTargetName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The SNMP Target MIB's snmpTargetAddrName related to the + notification." + ::= { dismanEventMIBNotificationObjects 2 } + +mteHotContextName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The context name related to the notification. This MUST be as + fully-qualified as possible, including filling in wildcard + information determined in processing." + ::= { dismanEventMIBNotificationObjects 3 } + +mteHotOID OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The object identifier of the destination object related to the + notification. This MUST be as fully-qualified as possible, + including filling in wildcard information determined in + processing. + + For a trigger-related notification this is from + mteTriggerValueID. + + For a set failure this is from mteEventSetObject." + ::= { dismanEventMIBNotificationObjects 4 } + +mteHotValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of the object at mteTriggerValueID when a + trigger fired." + ::= { dismanEventMIBNotificationObjects 5 } + +mteFailedReason OBJECT-TYPE + SYNTAX FailureReason + MAX-ACCESS accessible-for-notify + STATUS current + + + DESCRIPTION + "The reason for the failure of an attempt to check for a + trigger condition or set an object in response to an event." + ::= { dismanEventMIBNotificationObjects 6 } + +-- +-- Notifications +-- + +mteTriggerFired NOTIFICATION-TYPE + OBJECTS { mteHotTrigger, + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteHotValue } + STATUS current + DESCRIPTION + "Notification that the trigger indicated by the object + instances has fired, for triggers with mteTriggerType + 'boolean' or 'existence'." + ::= { dismanEventMIBNotifications 1 } + +mteTriggerRising NOTIFICATION-TYPE + OBJECTS { mteHotTrigger, + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteHotValue } + STATUS current + DESCRIPTION + "Notification that the rising threshold was met for triggers + with mteTriggerType 'threshold'." + ::= { dismanEventMIBNotifications 2 } + +mteTriggerFalling NOTIFICATION-TYPE + OBJECTS { mteHotTrigger, + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteHotValue } + STATUS current + DESCRIPTION + "Notification that the falling threshold was met for triggers + with mteTriggerType 'threshold'." + ::= { dismanEventMIBNotifications 3 } + +mteTriggerFailure NOTIFICATION-TYPE + OBJECTS { mteHotTrigger, + + + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteFailedReason } + STATUS current + DESCRIPTION + "Notification that an attempt to check a trigger has failed. + + The network manager must enable this notification only with + a certain fear and trembling, as it can easily crowd out more + important information. It should be used only to help diagnose + a problem that has appeared in the error counters and can not + be found otherwise." + ::= { dismanEventMIBNotifications 4 } + +mteEventSetFailure NOTIFICATION-TYPE + OBJECTS { mteHotTrigger, + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteFailedReason } + STATUS current + DESCRIPTION + "Notification that an attempt to do a set in response to an + event has failed. + + The network manager must enable this notification only with + a certain fear and trembling, as it can easily crowd out more + important information. It should be used only to help diagnose + a problem that has appeared in the error counters and can not + be found otherwise." + ::= { dismanEventMIBNotifications 5 } + +-- +-- Conformance +-- + +dismanEventMIBConformance OBJECT IDENTIFIER ::= { dismanEventMIB 3 } +dismanEventMIBCompliances OBJECT IDENTIFIER ::= + { dismanEventMIBConformance 1 } +dismanEventMIBGroups OBJECT IDENTIFIER ::= + { dismanEventMIBConformance 2 } + +-- Compliance + +dismanEventMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + + + "The compliance statement for entities which implement + the Event MIB." + MODULE -- this module + MANDATORY-GROUPS { + dismanEventResourceGroup, + dismanEventTriggerGroup, + dismanEventObjectsGroup, + dismanEventEventGroup, + dismanEventNotificationObjectGroup, + dismanEventNotificationGroup + } + + OBJECT mteTriggerTargetTag + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, thus limiting + monitoring to the local system or pre-configured + remote systems." + + OBJECT mteEventSetTargetTag + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, thus limiting + setting to the local system or pre-configured + remote systems." + + OBJECT mteTriggerValueIDWildcard + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, thus allowing + the system not to implement wildcarding." + + OBJECT mteTriggerContextNameWildcard + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, thus allowing + the system not to implement wildcarding." + + + OBJECT mteObjectsIDWildcard + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required, thus allowing + the system not to implement wildcarding." + + OBJECT mteEventSetContextNameWildcard + MIN-ACCESS read-only + DESCRIPTION + + + "Write access is not required, thus allowing + the system not to implement wildcarding." + + ::= { dismanEventMIBCompliances 1 } + +-- Units of Conformance + +dismanEventResourceGroup OBJECT-GROUP + OBJECTS { + mteResourceSampleMinimum, + mteResourceSampleInstanceMaximum, + mteResourceSampleInstances, + mteResourceSampleInstancesHigh, + mteResourceSampleInstanceLacks + } + STATUS current + DESCRIPTION + "Event resource status and control objects." + ::= { dismanEventMIBGroups 1 } + +dismanEventTriggerGroup OBJECT-GROUP + OBJECTS { + mteTriggerFailures, + + mteTriggerComment, + mteTriggerTest, + mteTriggerSampleType, + mteTriggerValueID, + mteTriggerValueIDWildcard, + mteTriggerTargetTag, + mteTriggerContextName, + mteTriggerContextNameWildcard, + mteTriggerFrequency, + mteTriggerObjectsOwner, + mteTriggerObjects, + mteTriggerEnabled, + mteTriggerEntryStatus, + + mteTriggerDeltaDiscontinuityID, + mteTriggerDeltaDiscontinuityIDWildcard, + mteTriggerDeltaDiscontinuityIDType, + mteTriggerExistenceTest, + mteTriggerExistenceStartup, + mteTriggerExistenceObjectsOwner, + mteTriggerExistenceObjects, + mteTriggerExistenceEventOwner, + mteTriggerExistenceEvent, + + + + mteTriggerBooleanComparison, + mteTriggerBooleanValue, + mteTriggerBooleanStartup, + mteTriggerBooleanObjectsOwner, + mteTriggerBooleanObjects, + mteTriggerBooleanEventOwner, + mteTriggerBooleanEvent, + + mteTriggerThresholdStartup, + mteTriggerThresholdObjectsOwner, + mteTriggerThresholdObjects, + mteTriggerThresholdRising, + mteTriggerThresholdFalling, + mteTriggerThresholdDeltaRising, + mteTriggerThresholdDeltaFalling, + mteTriggerThresholdRisingEventOwner, + mteTriggerThresholdRisingEvent, + mteTriggerThresholdFallingEventOwner, + mteTriggerThresholdFallingEvent, + mteTriggerThresholdDeltaRisingEventOwner, + mteTriggerThresholdDeltaRisingEvent, + mteTriggerThresholdDeltaFallingEventOwner, + mteTriggerThresholdDeltaFallingEvent + } + STATUS current + DESCRIPTION + "Event triggers." + ::= { dismanEventMIBGroups 2 } + +dismanEventObjectsGroup OBJECT-GROUP + OBJECTS { + mteObjectsID, + mteObjectsIDWildcard, + mteObjectsEntryStatus + } + STATUS current + DESCRIPTION + "Supplemental objects." + ::= { dismanEventMIBGroups 3 } + +dismanEventEventGroup OBJECT-GROUP + OBJECTS { + mteEventFailures, + + mteEventComment, + mteEventActions, + mteEventEnabled, + mteEventEntryStatus, + + + mteEventNotification, + mteEventNotificationObjectsOwner, + mteEventNotificationObjects, + + mteEventSetObject, + mteEventSetObjectWildcard, + mteEventSetValue, + mteEventSetTargetTag, + mteEventSetContextName, + mteEventSetContextNameWildcard + } + STATUS current + DESCRIPTION + "Events." + ::= { dismanEventMIBGroups 4 } + +dismanEventNotificationObjectGroup OBJECT-GROUP + OBJECTS { + mteHotTrigger, + mteHotTargetName, + mteHotContextName, + mteHotOID, + mteHotValue, + mteFailedReason + } + STATUS current + DESCRIPTION + "Notification objects." + ::= { dismanEventMIBGroups 5 } + +dismanEventNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + mteTriggerFired, + mteTriggerRising, + mteTriggerFalling, + mteTriggerFailure, + mteEventSetFailure + } + STATUS current + DESCRIPTION + "Notifications." + ::= { dismanEventMIBGroups 6 } + +END

Added: trunk/mibs/DISMAN-SCHEDULE-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/DISMAN-SCHEDULE-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,699 @@ +DISMAN-SCHEDULE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, Counter32, mib-2, zeroDotZero + FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, + DateAndTime, RowStatus, StorageType, VariablePointer + FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +schedMIB MODULE-IDENTITY + LAST-UPDATED "200201070000Z" + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO + "WG EMail: disman@dorothy.bmc.com + Subscribe: disman-request@dorothy.bmc.com + + Chair: Randy Presuhn + BMC Software, Inc. + Postal: Office 1-3141 + 2141 North First Street + San Jose, California 95131 + USA + EMail: rpresuhn@bmc.com + Phone: +1 408 546-1006 + + Editor: David B. Levi + Nortel Networks + Postal: 4401 Great America Parkway + Santa Clara, CA 95052-8185 + USA + EMail: dlevi@nortelnetworks.com + Phone: +1 865 686 0432 + + Editor: Juergen Schoenwaelder + TU Braunschweig + Postal: Bueltenweg 74/75 + 38106 Braunschweig + Germany + EMail: schoenw@ibr.cs.tu-bs.de + Phone: +49 531 391-3283" + DESCRIPTION + "This MIB module defines a MIB which provides mechanisms to + schedule SNMP set operations periodically or at specific + points in time." + REVISION "200201070000Z" + DESCRIPTION + "Revised version, published as RFC 3231. + + This revision introduces a new object type called + schedTriggers. Created new conformance and compliance + statements that take care of the new schedTriggers object. + + Several clarifications have been added to remove ambiguities + that were discovered and reported by implementors." + REVISION "199811171800Z" + DESCRIPTION + "Initial version, published as RFC 2591." + ::= { mib-2 63 } + +-- +-- The various groups defined within this MIB definition: +-- + +schedObjects OBJECT IDENTIFIER ::= { schedMIB 1 } +schedNotifications OBJECT IDENTIFIER ::= { schedMIB 2 } +schedConformance OBJECT IDENTIFIER ::= { schedMIB 3 } + +-- +-- Textual Conventions: +-- + +SnmpPduErrorStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This TC enumerates the SNMPv1 and SNMPv2 PDU error status + codes as defined in RFC 1157 and RFC 1905. It also adds a + pseudo error status code `noResponse' which indicates a + timeout condition." + SYNTAX INTEGER { + noResponse(-1), + noError(0), + tooBig(1), + noSuchName(2), + badValue(3), + readOnly(4), + genErr(5), + noAccess(6), + wrongType(7), + wrongLength(8), + wrongEncoding(9), + wrongValue(10), + noCreation(11), + inconsistentValue(12), + resourceUnavailable(13), + commitFailed(14), + undoFailed(15), + authorizationError(16), + notWritable(17), + inconsistentName(18) + } + +-- +-- Some scalars which provide information about the local time zone. +-- + +schedLocalTime OBJECT-TYPE + SYNTAX DateAndTime (SIZE (11)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The local time used by the scheduler. Schedules which + refer to calendar time will use the local time indicated + by this object. An implementation MUST return all 11 bytes + of the DateAndTime textual-convention so that a manager + may retrieve the offset from GMT time." + ::= { schedObjects 1 } + +-- +-- The schedule table which controls the scheduler. +-- + +schedTable OBJECT-TYPE + SYNTAX SEQUENCE OF SchedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table defines scheduled actions triggered by + SNMP set operations." + ::= { schedObjects 2 } + +schedEntry OBJECT-TYPE + SYNTAX SchedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular scheduled action. + + Unless noted otherwise, writable objects of this row + can be modified independent of the current value of + schedRowStatus, schedAdminStatus and schedOperStatus. + In particular, it is legal to modify schedInterval + and the objects in the schedCalendarGroup when + schedRowStatus is active and schedAdminStatus and + schedOperStatus are both enabled." + INDEX { schedOwner, schedName } + ::= { schedTable 1 } + +SchedEntry ::= SEQUENCE { + schedOwner SnmpAdminString, + schedName SnmpAdminString, + schedDescr SnmpAdminString, + schedInterval Unsigned32, + schedWeekDay BITS, + schedMonth BITS, + schedDay BITS, + schedHour BITS, + schedMinute BITS, + schedContextName SnmpAdminString, + schedVariable VariablePointer, + schedValue Integer32, + schedType INTEGER, + schedAdminStatus INTEGER, + schedOperStatus INTEGER, + schedFailures Counter32, + schedLastFailure SnmpPduErrorStatus, + schedLastFailed DateAndTime, + schedStorageType StorageType, + schedRowStatus RowStatus, + schedTriggers Counter32 +} + +schedOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The owner of this scheduling entry. The exact semantics of + this string are subject to the security policy defined by + + the security administrator." + ::= { schedEntry 1 } + +schedName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally-unique, administratively assigned name for this + scheduling entry. This object allows a schedOwner to have + multiple entries in the schedTable." + ::= { schedEntry 2 } + +schedDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The human readable description of the purpose of this + scheduling entry." + DEFVAL { "" } + ::= { schedEntry 3 } + +schedInterval OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds between two action invocations of + a periodic scheduler. Implementations must guarantee + that action invocations will not occur before at least + schedInterval seconds have passed. + + The scheduler must ignore all periodic schedules that + have a schedInterval value of 0. A periodic schedule + with a scheduling interval of 0 seconds will therefore + never invoke an action. + + Implementations may be forced to delay invocations in the + face of local constraints. A scheduled management function + should therefore not rely on the accuracy provided by the + scheduler implementation. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { 0 } + ::= { schedEntry 4 } + +schedWeekDay OBJECT-TYPE + SYNTAX BITS { + sunday(0), + monday(1), + tuesday(2), + wednesday(3), + thursday(4), + friday(5), + saturday(6) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of weekdays on which the scheduled action should + take place. Setting multiple bits will include several + weekdays in the set of possible weekdays for this schedule. + Setting all bits will cause the scheduler to ignore the + weekday. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { {} } + ::= { schedEntry 5 } + +schedMonth OBJECT-TYPE + SYNTAX BITS { + january(0), + february(1), + march(2), + april(3), + may(4), + june(5), + july(6), + august(7), + september(8), + october(9), + november(10), + december(11) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of months during which the scheduled action should + take place. Setting multiple bits will include several + months in the set of possible months for this schedule. + + Setting all bits will cause the scheduler to ignore the + month. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { {} } + ::= { schedEntry 6 } + +schedDay OBJECT-TYPE + SYNTAX BITS { + d1(0), d2(1), d3(2), d4(3), d5(4), + d6(5), d7(6), d8(7), d9(8), d10(9), + d11(10), d12(11), d13(12), d14(13), d15(14), + d16(15), d17(16), d18(17), d19(18), d20(19), + d21(20), d22(21), d23(22), d24(23), d25(24), + d26(25), d27(26), d28(27), d29(28), d30(29), + d31(30), + r1(31), r2(32), r3(33), r4(34), r5(35), + r6(36), r7(37), r8(38), r9(39), r10(40), + r11(41), r12(42), r13(43), r14(44), r15(45), + r16(46), r17(47), r18(48), r19(49), r20(50), + r21(51), r22(52), r23(53), r24(54), r25(55), + r26(56), r27(57), r28(58), r29(59), r30(60), + r31(61) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of days in a month on which a scheduled action + should take place. There are two sets of bits one can + use to define the day within a month: + + Enumerations starting with the letter 'd' indicate a + day in a month relative to the first day of a month. + The first day of the month can therefore be specified + by setting the bit d1(0) and d31(30) means the last + day of a month with 31 days. + + Enumerations starting with the letter 'r' indicate a + day in a month in reverse order, relative to the last + day of a month. The last day in the month can therefore + be specified by setting the bit r1(31) and r31(61) means + the first day of a month with 31 days. + + Setting multiple bits will include several days in the set + of possible days for this schedule. Setting all bits will + cause the scheduler to ignore the day within a month. + + Setting all bits starting with the letter 'd' or the + letter 'r' will also cause the scheduler to ignore the + day within a month. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { {} } + ::= { schedEntry 7 } + +schedHour OBJECT-TYPE + SYNTAX BITS { + h0(0), h1(1), h2(2), h3(3), h4(4), + h5(5), h6(6), h7(7), h8(8), h9(9), + h10(10), h11(11), h12(12), h13(13), h14(14), + h15(15), h16(16), h17(17), h18(18), h19(19), + h20(20), h21(21), h22(22), h23(23) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of hours within a day during which the scheduled + action should take place. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { {} } + ::= { schedEntry 8 } + +schedMinute OBJECT-TYPE + SYNTAX BITS { + m0(0), m1(1), m2(2), m3(3), m4(4), + m5(5), m6(6), m7(7), m8(8), m9(9), + m10(10), m11(11), m12(12), m13(13), m14(14), + m15(15), m16(16), m17(17), m18(18), m19(19), + m20(20), m21(21), m22(22), m23(23), m24(24), + m25(25), m26(26), m27(27), m28(28), m29(29), + m30(30), m31(31), m32(32), m33(33), m34(34), + m35(35), m36(36), m37(37), m38(38), m39(39), + m40(40), m41(41), m42(42), m43(43), m44(44), + m45(45), m46(46), m47(47), m48(48), m49(49), + m50(50), m51(51), m52(52), m53(53), m54(54), + m55(55), m56(56), m57(57), m58(58), m59(59) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The set of minutes within an hour when the scheduled action + should take place. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { {} } + ::= { schedEntry 9 } + +schedContextName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The context which contains the local MIB variable pointed + to by schedVariable." + DEFVAL { "" } + ::= { schedEntry 10 } + +schedVariable OBJECT-TYPE + SYNTAX VariablePointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An object identifier pointing to a local MIB variable + which resolves to an ASN.1 primitive type of INTEGER." + DEFVAL { zeroDotZero } + ::= { schedEntry 11 } + +schedValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value which is written to the MIB object pointed to by + schedVariable when the scheduler invokes an action. The + implementation shall enforce the use of access control + rules when performing the set operation on schedVariable. + This is accomplished by calling the isAccessAllowed abstract + service interface as defined in RFC 2571. + + Note that an implementation may choose to issue an SNMP Set + message to the SNMP engine and leave the access control + decision to the normal message processing procedure." + DEFVAL { 0 } + ::= { schedEntry 12 } + +schedType OBJECT-TYPE + SYNTAX INTEGER { + periodic(1), + calendar(2), + oneshot(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of this schedule. The value periodic(1) indicates + that this entry specifies a periodic schedule. A periodic + schedule is defined by the value of schedInterval. The + values of schedWeekDay, schedMonth, schedDay, schedHour + and schedMinute are ignored. + + The value calendar(2) indicates that this entry describes a + calendar schedule. A calendar schedule is defined by the + values of schedWeekDay, schedMonth, schedDay, schedHour and + schedMinute. The value of schedInterval is ignored. A + calendar schedule will trigger on all local times that + satisfy the bits set in schedWeekDay, schedMonth, schedDay, + schedHour and schedMinute. + + The value oneshot(3) indicates that this entry describes a + one-shot schedule. A one-shot schedule is similar to a + calendar schedule with the additional feature that it + disables itself by changing in the `finished' + schedOperStatus once the schedule triggers an action. + + Note that implementations which maintain a list of pending + activations must re-calculate them when this object is + changed." + DEFVAL { periodic } + ::= { schedEntry 13 } + +schedAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The desired state of the schedule." + DEFVAL { disabled } + ::= { schedEntry 14 } + +schedOperStatus OBJECT-TYPE + SYNTAX INTEGER { + + enabled(1), + disabled(2), + finished(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of this schedule. The state + enabled(1) indicates this entry is active and that the + scheduler will invoke actions at appropriate times. The + disabled(2) state indicates that this entry is currently + inactive and ignored by the scheduler. The finished(3) + state indicates that the schedule has ended. Schedules + in the finished(3) state are ignored by the scheduler. + A one-shot schedule enters the finished(3) state when it + deactivates itself. + + Note that the operational state must not be enabled(1) + when the schedRowStatus is not active." + ::= { schedEntry 15 } + +schedFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable counts the number of failures while invoking + the scheduled action. This counter at most increments once + for a triggered action." + ::= { schedEntry 16 } + +schedLastFailure OBJECT-TYPE + SYNTAX SnmpPduErrorStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The most recent error that occurred during the invocation of + a scheduled action. The value noError(0) is returned + if no errors have occurred yet." + DEFVAL { noError } + ::= { schedEntry 17 } + +schedLastFailed OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the most recent failure occurred. + + The value '0000000000000000'H is returned if no failure + occurred since the last re-initialization of the scheduler." + DEFVAL { '0000000000000000'H } + ::= { schedEntry 18 } + +schedStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object defines whether this scheduled action is kept + in volatile storage and lost upon reboot or if this row is + backed up by non-volatile or permanent storage. + + Conceptual rows having the value `permanent' must allow + write access to the columnar objects schedDescr, + schedInterval, schedContextName, schedVariable, schedValue, + and schedAdminStatus. If an implementation supports the + schedCalendarGroup, write access must be also allowed to + the columnar objects schedWeekDay, schedMonth, schedDay, + schedHour, schedMinute." + DEFVAL { volatile } + ::= { schedEntry 19 } + +schedRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this scheduled action. A control that allows + entries to be added and removed from this table. + + Note that the operational state must change to enabled + when the administrative state is enabled and the row + status changes to active(1). + + Attempts to destroy(6) a row or to set a row + notInService(2) while the operational state is enabled + result in inconsistentValue errors. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { schedEntry 20 } + +schedTriggers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable counts the number of attempts (either + successful or failed) to invoke the scheduled action." + ::= { schedEntry 21 } + +-- +-- Notifications that are emitted to indicate failures. The +-- definition of schedTraps makes notification registrations +-- reversible (see STD 58, RFC 2578). +-- + +schedTraps OBJECT IDENTIFIER ::= { schedNotifications 0 } + +schedActionFailure NOTIFICATION-TYPE + OBJECTS { schedLastFailure, schedLastFailed } + STATUS current + DESCRIPTION + "This notification is generated whenever the invocation of a + scheduled action fails." + ::= { schedTraps 1 } + +-- conformance information + +schedCompliances OBJECT IDENTIFIER ::= { schedConformance 1 } +schedGroups OBJECT IDENTIFIER ::= { schedConformance 2 } + +-- compliance statements + +schedCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which implement + the scheduling MIB." + MODULE -- this module + MANDATORY-GROUPS { + schedGroup2, schedNotificationsGroup + } + GROUP schedCalendarGroup + DESCRIPTION + "The schedCalendarGroup is mandatory only for those + implementations that support calendar based schedules." + OBJECT schedType + DESCRIPTION + "The values calendar(2) or oneshot(3) are not valid for + implementations that do not implement the + schedCalendarGroup. Such an implementation must return + inconsistentValue error responses for attempts to set + schedAdminStatus to calendar(2) or oneshot(3)." + ::= { schedCompliances 2 } + +schedGroup2 OBJECT-GROUP + OBJECTS { + schedDescr, schedInterval, schedContextName, + schedVariable, schedValue, schedType, + schedAdminStatus, schedOperStatus, schedFailures, + schedLastFailure, schedLastFailed, schedStorageType, + schedRowStatus, schedTriggers + } + STATUS current + DESCRIPTION + "A collection of objects providing scheduling capabilities." + ::= { schedGroups 4 } + +schedCalendarGroup OBJECT-GROUP + OBJECTS { + schedLocalTime, schedWeekDay, schedMonth, + schedDay, schedHour, schedMinute + } + STATUS current + DESCRIPTION + "A collection of objects providing calendar based schedules." + ::= { schedGroups 2 } + +schedNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + schedActionFailure + } + STATUS current + DESCRIPTION + "The notifications emitted by the scheduler." + ::= { schedGroups 3 } + +-- +-- Deprecated compliance and conformance group definitions +-- from RFC 2591. +-- + +schedCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for SNMP entities which implement + the scheduling MIB." + MODULE -- this module + MANDATORY-GROUPS { + schedGroup, schedNotificationsGroup + } + + GROUP schedCalendarGroup + DESCRIPTION + "The schedCalendarGroup is mandatory only for those + implementations that support calendar based schedules." + OBJECT schedType + DESCRIPTION + "The values calendar(2) or oneshot(3) are not valid for + implementations that do not implement the + schedCalendarGroup. Such an implementation must return + inconsistentValue error responses for attempts to set + schedAdminStatus to calendar(2) or oneshot(3)." + ::= { schedCompliances 1 } + +schedGroup OBJECT-GROUP + OBJECTS { + schedDescr, schedInterval, schedContextName, + schedVariable, schedValue, schedType, + schedAdminStatus, schedOperStatus, schedFailures, + schedLastFailure, schedLastFailed, schedStorageType, + schedRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing scheduling capabilities." + ::= { schedGroups 1 } + +END

Added: trunk/mibs/DISMAN-SCRIPT-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/DISMAN-SCRIPT-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,1764 @@ +DISMAN-SCRIPT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, mib-2 + FROM SNMPv2-SMI + + RowStatus, TimeInterval, DateAndTime, StorageType, DisplayString + FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +scriptMIB MODULE-IDENTITY + LAST-UPDATED "200108210000Z" + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO + "WG EMail: disman@dorothy.bmc.com + Subscribe: disman-request@dorothy.bmc.com + + Chair: Randy Presuhn + BMC Software, Inc. + + Postal: Office 1-3141 + 2141 North First Street + San Jose, California 95131 + USA + EMail: rpresuhn@bmc.com + Phone: +1 408 546-1006 + + Editor: David B. Levi + Nortel Networks + Postal: 4401 Great America Parkway + Santa Clara, CA 95052-8185 + USA + EMail: dlevi@nortelnetworks.com + Phone: +1 423 686 0432 + + Editor: Juergen Schoenwaelder + TU Braunschweig + Postal: Bueltenweg 74/75 + 38106 Braunschweig + Germany + EMail: schoenw@ibr.cs.tu-bs.de + Phone: +49 531 391-3283" + DESCRIPTION + "This MIB module defines a set of objects that allow to + delegate management scripts to distributed managers." + REVISION "200108210000Z" + DESCRIPTION + "Revised version, published as RFC 3165. + + This revision introduces several new objects: smScriptError, + smScriptLastChange, smLaunchError, smLaunchLastChange, + smLaunchRowExpireTime, smRunResultTime, and smRunErrorTime. + + The following existing objects were updated: the maximum + value of smRunLifeTime now disables the timer, an + autostart value was added to the smLaunchAdminStatus + object, and a new expired state was added to the + smLaunchOperStatus object. + + A new smScriptException notification has been added to + support runtime error notifications. + + Created new conformance and compliance statements that + take care of the new objects and notifications. + + Clarifications have been added in several places to remove + ambiguities or contradictions that were discovered and + reported by implementors." + + REVISION "199902221800Z" + DESCRIPTION + "Initial version, published as RFC 2592." + ::= { mib-2 64 } + +-- +-- The groups defined within this MIB module: +-- + +smObjects OBJECT IDENTIFIER ::= { scriptMIB 1 } +smNotifications OBJECT IDENTIFIER ::= { scriptMIB 2 } +smConformance OBJECT IDENTIFIER ::= { scriptMIB 3 } + +-- +-- Script language and language extensions. +-- +-- This group defines tables which list the languages and the +-- language extensions supported by a Script MIB implementation. +-- Languages are uniquely identified by object identifier values. +-- + +smLangTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmLangEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists supported script languages." + ::= { smObjects 1 } + +smLangEntry OBJECT-TYPE + SYNTAX SmLangEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular language." + INDEX { smLangIndex } + ::= { smLangTable 1 } + +SmLangEntry ::= SEQUENCE { + smLangIndex Integer32, + smLangLanguage OBJECT IDENTIFIER, + smLangVersion SnmpAdminString, + smLangVendor OBJECT IDENTIFIER, + smLangRevision SnmpAdminString, + smLangDescr SnmpAdminString +} + +smLangIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this language entry. + + The value is expected to remain constant at least from one + re-initialization of the entity's network management system + to the next re-initialization. + + Note that the data type and the range of this object must + be consistent with the definition of smScriptLanguage." + ::= { smLangEntry 1 } + +smLangLanguage OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The globally unique identification of the language." + ::= { smLangEntry 2 } + +smLangVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language. The zero-length string + shall be used if the language does not have a version + number. + + It is suggested that the version number consist of one or + more decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smLangEntry 3 } + +smLangVendor OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An object identifier which identifies the vendor who + provides the implementation of the language. This object + identifier SHALL point to the object identifier directly + below the enterprise object identifier {1 3 6 1 4 1} + allocated for the vendor. The value must be the object + identifier {0 0} if the vendor is not known." + ::= { smLangEntry 4 } + +smLangRevision OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language implementation. + The value of this object must be an empty string if + version number of the implementation is unknown. + + It is suggested that the value consist of one or more + decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smLangEntry 5 } + +smLangDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of the language." + ::= { smLangEntry 6 } + +smExtsnTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmExtsnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists supported language extensions." + ::= { smObjects 2 } + +smExtsnEntry OBJECT-TYPE + SYNTAX SmExtsnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular language extension." + INDEX { smLangIndex, smExtsnIndex } + ::= { smExtsnTable 1 } + +SmExtsnEntry ::= SEQUENCE { + smExtsnIndex Integer32, + smExtsnExtension OBJECT IDENTIFIER, + smExtsnVersion SnmpAdminString, + smExtsnVendor OBJECT IDENTIFIER, + smExtsnRevision SnmpAdminString, + smExtsnDescr SnmpAdminString +} + +smExtsnIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this language extension entry. + + The value is expected to remain constant at least from one + re-initialization of the entity's network management system + to the next re-initialization." + ::= { smExtsnEntry 1} + +smExtsnExtension OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The globally unique identification of the language + extension." + ::= { smExtsnEntry 2 } + +smExtsnVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language extension. + It is suggested that the version number consist of one or + more decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smExtsnEntry 3 } + +smExtsnVendor OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An object identifier which identifies the vendor who + provides the implementation of the extension. The + object identifier value should point to the OID node + directly below the enterprise OID {1 3 6 1 4 1} + allocated for the vendor. The value must by the object + identifier {0 0} if the vendor is not known." + ::= { smExtsnEntry 4 } + +smExtsnRevision OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the extension implementation. + The value of this object must be an empty string if + version number of the implementation is unknown. + + It is suggested that the value consist of one or more + decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smExtsnEntry 5 } + +smExtsnDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of the language extension." + ::= { smExtsnEntry 6 } + +-- +-- Scripts known by the Script MIB implementation. +-- +-- This group defines a table which lists all known scripts. +-- Scripts can be added and removed through manipulation of the +-- smScriptTable. +-- + +smScriptObjects OBJECT IDENTIFIER ::= { smObjects 3 } + +smScriptTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmScriptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes locally known scripts." + ::= { smScriptObjects 1 } + +smScriptEntry OBJECT-TYPE + SYNTAX SmScriptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular script. Every script that + is stored in non-volatile memory is required to appear in + this script table." + INDEX { smScriptOwner, smScriptName } + ::= { smScriptTable 1 } + +SmScriptEntry ::= SEQUENCE { + smScriptOwner SnmpAdminString, + smScriptName SnmpAdminString, + smScriptDescr SnmpAdminString, + smScriptLanguage Integer32, + smScriptSource DisplayString, + smScriptAdminStatus INTEGER, + smScriptOperStatus INTEGER, + smScriptStorageType StorageType, + smScriptRowStatus RowStatus, + smScriptError SnmpAdminString, + smScriptLastChange DateAndTime +} + +smScriptOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The manager who owns this row in the smScriptTable." + ::= { smScriptEntry 1 } + +smScriptName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally-unique, administratively assigned name for this + script. This object allows an smScriptOwner to have multiple + entries in the smScriptTable. + + This value of this object may be used to derive the name + (e.g. a file name) which is used by the Script MIB + implementation to access the script in non-volatile + storage. The details of this mapping are implementation + specific. However, the mapping needs to ensure that scripts + created by different owners with the same script name do not + map to the same name in non-volatile storage." + ::= { smScriptEntry 2 } + +smScriptDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A description of the purpose of the script." + ::= { smScriptEntry 3 } + +smScriptLanguage OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object type identifies an entry in the + smLangTable which is used to execute this script. + The special value 0 may be used by hard-wired scripts + that can not be modified and that are executed by + internal functions. + + Set requests to change this object are invalid if the + value of smScriptOperStatus is `enabled' or `compiling' + and will result in an inconsistentValue error. + + Note that the data type and the range of this object must + be consistent with the definition of smLangIndex." + ::= { smScriptEntry 4 } + +smScriptSource OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object either contains a reference to the script + source or an empty string. A reference must be given + in the form of a Uniform Resource Locator (URL) as + defined in RFC 2396. The allowed character sets and the + encoding rules defined in RFC 2396 section 2 apply. + + When the smScriptAdminStatus object is set to `enabled', + the Script MIB implementation will `pull' the script + source from the URL contained in this object if the URL + is not empty. + + An empty URL indicates that the script source is loaded + from local storage. The script is read from the smCodeTable + if the value of smScriptStorageType is volatile. Otherwise, + the script is read from non-volatile storage. + + Note: This document does not mandate implementation of any + specific URL scheme. An attempt to load a script from a + nonsupported URL scheme will cause the smScriptOperStatus + to report an `unknownProtocol' error. + + Set requests to change this object are invalid if the + value of smScriptOperStatus is `enabled', `editing', + `retrieving' or `compiling' and will result in an + inconsistentValue error." + DEFVAL { ''H } + ::= { smScriptEntry 5 } + +smScriptAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + editing(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of + the script. See the definition of smScriptOperStatus for + a description of the values. + + When the smScriptAdminStatus object is set to `enabled' and + the smScriptOperStatus is `disabled' or one of the error + states, the Script MIB implementation will `pull' the script + source from the URL contained in the smScriptSource object + if the URL is not empty." + DEFVAL { disabled } + ::= { smScriptEntry 6 } + +smScriptOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + editing(3), + retrieving(4), + compiling(5), + noSuchScript(6), + accessDenied(7), + wrongLanguage(8), + wrongVersion(9), + compilationFailed(10), + noResourcesLeft(11), + unknownProtocol(12), + protocolFailure(13), + genericError(14) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The actual status of the script in the runtime system. The + value of this object is only meaningful when the value of + the smScriptRowStatus object is `active'. + + The smScriptOperStatus object may have the following values: + + - `enabled' indicates that the script is available and can + be started by a launch table entry. + + - `disabled' indicates that the script can not be used. + + - `editing' indicates that the script can be modified in the + smCodeTable. + + - `retrieving' indicates that the script is currently being + loaded from non-volatile storage or a remote system. + + - `compiling' indicates that the script is currently being + compiled by the runtime system. + + - `noSuchScript' indicates that the script does not exist + at the smScriptSource. + + - `accessDenied' indicates that the script can not be loaded + from the smScriptSource due to a lack of permissions. + + - `wrongLanguage' indicates that the script can not be + loaded from the smScriptSource because of a language + mismatch. + + - `wrongVersion' indicates that the script can not be loaded + from the smScriptSource because of a language version + mismatch. + + - `compilationFailed' indicates that the compilation failed. + + - `noResourcesLeft' indicates that the runtime system does + not have enough resources to load the script. + + - `unknownProtocol' indicates that the script could not be + loaded from the smScriptSource because the requested + protocol is not supported. + + - `protocolFailure' indicates that the script could not be + loaded from the smScriptSource because of a protocol + failure. + + - `genericError' indicates that the script could not be + + loaded due to an error condition not listed above. + + The `retrieving' and `compiling' states are transient states + which will either lead to one of the error states or the + `enabled' state. The `disabled' and `editing' states are + administrative states which are only reached by explicit + management operations. + + All launch table entries that refer to this script table + entry shall have an smLaunchOperStatus value of `disabled' + when the value of this object is not `enabled'." + DEFVAL { disabled } + ::= { smScriptEntry 7 } + +smScriptStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object defines whether this row and the script + controlled by this row are kept in volatile storage and + lost upon reboot or if this row is backed up by + non-volatile or permanent storage. + + The storage type of this row always complies with the value + of this entry if the value of the corresponding RowStatus + object is `active'. + + However, the storage type of the script controlled by this + row may be different, if the value of this entry is + `non-volatile'. The script controlled by this row is written + into local non-volatile storage if the following condition + becomes true: + + (a) the URL contained in the smScriptSource object is empty + and + (b) the smScriptStorageType is `nonVolatile' + and + (c) the smScriptOperStatus is `enabled' + + Setting this object to `volatile' removes a script from + non-volatile storage if the script controlled by this row + has been in non-volatile storage before. Attempts to set + this object to permanent will always fail with an + inconsistentValue error. + + The value of smScriptStorageType is only meaningful if the + value of the corresponding RowStatus object is `active'. + + If smScriptStorageType has the value permanent(4), then all + objects whose MAX-ACCESS value is read-create must be + writable, with the exception of the smScriptStorageType and + smScriptRowStatus objects, which shall be read-only." + DEFVAL { volatile } + ::= { smScriptEntry 8 } + +smScriptRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + Changing the smScriptRowStatus from `active' to + `notInService' will remove the associated script from the + runtime system. + + Deleting conceptual rows from this table may affect the + deletion of other resources associated with this row. For + example, a script stored in non-volatile storage may be + removed from non-volatile storage. + + An entry may not exist in the `active' state unless all + required objects in the entry have appropriate values. Rows + that are not complete or not in service are not known by the + script runtime system. + + Attempts to `destroy' a row or to set a row `notInService' + while the smScriptOperStatus is `enabled' will result in an + inconsistentValue error. + + Attempts to `destroy' a row or to set a row `notInService' + where the value of the smScriptStorageType object is + `permanent' or `readOnly' will result in an + inconsistentValue error. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smScriptEntry 9 } + +smScriptError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if the + + transition into the operational status `enabled' failed. + Implementations must reset the error message to a + zero-length string when a new attempt to change the + script status to `enabled' is started." + DEFVAL { ''H } + ::= { smScriptEntry 10 } + +smScriptLastChange OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when this script table entry was last + modified. The value '0000000000000000'H is returned if + the script table entry has not yet been modified. + + Note that the resetting of smScriptError is not considered + a change of the script table entry." + DEFVAL { '0000000000000000'H } + ::= { smScriptEntry 11 } + +-- +-- Access to script code via SNMP +-- +-- The smCodeTable allows script code to be read and modified +-- via SNMP. +-- + +smCodeTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the script code for scripts that are + written via SNMP write operations." + ::= { smScriptObjects 2 } + +smCodeEntry OBJECT-TYPE + SYNTAX SmCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular fragment of a script." + INDEX { smScriptOwner, smScriptName, smCodeIndex } + ::= { smCodeTable 1 } + +SmCodeEntry ::= SEQUENCE { + smCodeIndex Unsigned32, + smCodeText OCTET STRING, + smCodeRowStatus RowStatus +} + +smCodeIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value identifying this code fragment." + ::= { smCodeEntry 1 } + +smCodeText OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..1024)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The code that makes up a fragment of a script. The format + of this code fragment depends on the script language which + is identified by the associated smScriptLanguage object." + ::= { smCodeEntry 2 } + +smCodeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smCodeEntry 3 } + +-- +-- Script execution. +-- +-- This group defines tables which allow script execution to be +-- initiated, suspended, resumed, and terminated. It also provides +-- a mechanism for keeping a history of recent script executions +-- and their results. +-- + +smRunObjects OBJECT IDENTIFIER ::= { smObjects 4 } + +smLaunchTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmLaunchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes scripts that are ready + to be executed together with their parameters." + ::= { smRunObjects 1 } + +smLaunchEntry OBJECT-TYPE + SYNTAX SmLaunchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular executable script." + INDEX { smLaunchOwner, smLaunchName } + ::= { smLaunchTable 1 } + +SmLaunchEntry ::= SEQUENCE { + smLaunchOwner SnmpAdminString, + smLaunchName SnmpAdminString, + smLaunchScriptOwner SnmpAdminString, + smLaunchScriptName SnmpAdminString, + smLaunchArgument OCTET STRING, + smLaunchMaxRunning Unsigned32, + smLaunchMaxCompleted Unsigned32, + smLaunchLifeTime TimeInterval, + smLaunchExpireTime TimeInterval, + smLaunchStart Integer32, + smLaunchControl INTEGER, + smLaunchAdminStatus INTEGER, + smLaunchOperStatus INTEGER, + smLaunchRunIndexNext Integer32, + smLaunchStorageType StorageType, + smLaunchRowStatus RowStatus, + smLaunchError SnmpAdminString, + smLaunchLastChange DateAndTime, + smLaunchRowExpireTime TimeInterval +} + +smLaunchOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The manager who owns this row in the smLaunchTable. Every + instance of a running script started from a particular entry + in the smLaunchTable (i.e. entries in the smRunTable) will + be owned by the same smLaunchOwner used to index the entry + in the smLaunchTable. This owner is not necessarily the same + as the owner of the script itself (smLaunchScriptOwner)." + ::= { smLaunchEntry 1 } + +smLaunchName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally-unique, administratively assigned name for this + launch table entry. This object allows an smLaunchOwner to + have multiple entries in the smLaunchTable. The smLaunchName + is an arbitrary name that must be different from any other + smLaunchTable entries with the same smLaunchOwner but can be + the same as other entries in the smLaunchTable with + different smLaunchOwner values. Note that the value of + smLaunchName is not related in any way to the name of the + script being launched." + ::= { smLaunchEntry 2 } + +smLaunchScriptOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object in combination with the value of + smLaunchScriptName identifies the script that can be + launched from this smLaunchTable entry. Attempts to write + this object will fail with an inconsistentValue error if + the value of smLaunchOperStatus is `enabled'." + ::= { smLaunchEntry 3 } + +smLaunchScriptName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object in combination with the value of + the smLaunchScriptOwner identifies the script that can be + launched from this smLaunchTable entry. The zero-length + string may be used to point to a non-existing script. + + Attempts to write this object will fail with an + inconsistentValue error if the value of smLaunchOperStatus + is `enabled'." + DEFVAL { ''H } + ::= { smLaunchEntry 4 } + +smLaunchArgument OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The argument supplied to the script. When a script is + invoked, the value of this object is used to initialize + the smRunArgument object." + DEFVAL { ''H } + ::= { smLaunchEntry 5 } + +smLaunchMaxRunning OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of concurrently running scripts that may + be invoked from this entry in the smLaunchTable. Lowering + the current value of this object does not affect any scripts + that are already executing." + DEFVAL { 1 } + ::= { smLaunchEntry 6 } + +smLaunchMaxCompleted OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of finished scripts invoked from this + entry in the smLaunchTable allowed to be retained in the + smRunTable. Whenever the value of this object is changed + and whenever a script terminates, entries in the smRunTable + are deleted if necessary until the number of completed + scripts is smaller than the value of this object. Scripts + whose smRunEndTime value indicates the oldest completion + time are deleted first." + DEFVAL { 1 } + ::= { smLaunchEntry 7 } + +smLaunchLifeTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default maximum amount of time a script launched + from this entry may run. The value of this object is used + to initialize the smRunLifeTime object when a script is + launched. Changing the value of an smLaunchLifeTime + instance does not affect scripts previously launched from + + this entry." + DEFVAL { 360000 } + ::= { smLaunchEntry 8 } + +smLaunchExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default maximum amount of time information about a + script launched from this entry is kept in the smRunTable + after the script has completed execution. The value of + this object is used to initialize the smRunExpireTime + object when a script is launched. Changing the value of an + smLaunchExpireTime instance does not affect scripts + previously launched from this entry." + DEFVAL { 360000 } + ::= { smLaunchEntry 9 } + +smLaunchStart OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to start the execution of scripts. + When retrieved, the value will be the value of smRunIndex + for the last script that started execution by manipulating + this object. The value will be zero if no script started + execution yet. + + A script is started by setting this object to an unused + smRunIndex value. A new row in the smRunTable will be + created which is indexed by the value supplied by the + set-request in addition to the value of smLaunchOwner and + smLaunchName. An unused value can be obtained by reading + the smLaunchRunIndexNext object. + + Setting this object to the special value 0 will start + the script with a self-generated smRunIndex value. The + consequence is that the script invoker has no reliable + way to determine the smRunIndex value for this script + invocation and that the invoker has therefore no way + to obtain the results from this script invocation. The + special value 0 is however useful for scheduled script + invocations. + + If this object is set, the following checks must be + + performed: + + 1) The value of the smLaunchOperStatus object in this + entry of the smLaunchTable must be `enabled'. + 2) The values of smLaunchScriptOwner and + smLaunchScriptName of this row must identify an + existing entry in the smScriptTable. + 3) The value of smScriptOperStatus of this entry must + be `enabled'. + 4) The principal performing the set operation must have + read access to the script. This must be checked by + calling the isAccessAllowed abstract service interface + defined in RFC 2271 on the row in the smScriptTable + identified by smLaunchScriptOwner and smLaunchScriptName. + The isAccessAllowed abstract service interface must be + called on all columnar objects in the smScriptTable with + a MAX-ACCESS value different than `not-accessible'. The + test fails as soon as a call indicates that access is + not allowed. + 5) If the value provided by the set operation is not 0, + a check must be made that the value is currently not + in use. Otherwise, if the value provided by the set + operation is 0, a suitable unused value must be + generated. + 6) The number of currently executing scripts invoked + from this smLaunchTable entry must be less than + smLaunchMaxRunning. + + Attempts to start a script will fail with an + inconsistentValue error if one of the checks described + above fails. + + Otherwise, if all checks have been passed, a new entry + in the smRunTable will be created indexed by smLaunchOwner, + smLaunchName and the new value for smRunIndex. The value + of smLaunchArgument will be copied into smRunArgument, + the value of smLaunchLifeTime will be copied to + smRunLifeTime, and the value of smLaunchExpireTime + will be copied to smRunExpireTime. + + The smRunStartTime will be set to the current time and + the smRunState will be set to `initializing' before the + script execution is initiated in the appropriate runtime + system. + + Note that the data type and the range of this object must + be consistent with the smRunIndex object. Since this + object might be written from the scheduling MIB, the + + data type Integer32 rather than Unsigned32 is used." + DEFVAL { 0 } + ::= { smLaunchEntry 10 } + +smLaunchControl OBJECT-TYPE + SYNTAX INTEGER { + abort(1), + suspend(2), + resume(3), + nop(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to request a state change for all + running scripts in the smRunTable that were started from + this row in the smLaunchTable. + + Setting this object to abort(1), suspend(2) or resume(3) + will set the smRunControl object of all applicable rows + in the smRunTable to abort(1), suspend(2) or resume(3) + respectively. The phrase `applicable rows' means the set of + rows which were created from this entry in the smLaunchTable + and whose value of smRunState allows the corresponding + state change as described in the definition of the + smRunControl object. Setting this object to nop(4) has no + effect. + + Attempts to set this object lead to an inconsistentValue + error only if all implicated sets on all the applicable + rows lead to inconsistentValue errors. It is not allowed + to return an inconsistentValue error if at least one state + change on one of the applicable rows was successful." + DEFVAL { nop } + ::= { smLaunchEntry 11 } + +smLaunchAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + autostart(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of + this launch table entry. The values enabled(1) and + autostart(3) both indicate that the launch table entry + + should transition into the operational enabled(1) state as + soon as the associated script table entry is enabled(1). + + The value autostart(3) further indicates that the script + is started automatically by conceptually writing the + value 0 into the associated smLaunchStart object during + the transition from the `disabled' into the `enabled' + operational state. This is useful for scripts that are + to be launched on system start-up." + DEFVAL { disabled } + ::= { smLaunchEntry 12 } + +smLaunchOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + expired(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the actual status of + this launch table entry. The smLaunchOperStatus object + may have the following values: + + - `enabled' indicates that the launch table entry is + available and can be used to start scripts. + + - `disabled' indicates that the launch table entry can + not be used to start scripts. + + - `expired' indicates that the launch table entry can + not be used to start scripts and will disappear as + soon as all smRunTable entries associated with this + launch table entry have disappeared. + + The value `enabled' requires that the smLaunchRowStatus + object is active. The value `disabled' requires that there + are no entries in the smRunTable associated with this + smLaunchTable entry." + DEFVAL { disabled } + ::= { smLaunchEntry 13 } + +smLaunchRunIndexNext OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable is used for creating rows in the smRunTable. + The value of this variable is a currently unused value + for smRunIndex, which can be written into the smLaunchStart + object associated with this row to launch a script. + + The value returned when reading this variable must be unique + for the smLaunchOwner and smLaunchName associated with this + row. Subsequent attempts to read this variable must return + different values. + + This variable will return the special value 0 if no new rows + can be created. + + Note that the data type and the range of this object must be + consistent with the definition of smRunIndex." + ::= { smLaunchEntry 14 } + +smLaunchStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object defines if this row is kept in volatile storage + and lost upon reboot or if this row is backed up by stable + storage. + + The value of smLaunchStorageType is only meaningful if the + value of the corresponding RowStatus object is active. + + If smLaunchStorageType has the value permanent(4), then all + objects whose MAX-ACCESS value is read-create must be + writable, with the exception of the smLaunchStorageType and + smLaunchRowStatus objects, which shall be read-only." + DEFVAL { volatile } + ::= { smLaunchEntry 15 } + +smLaunchRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + Attempts to `destroy' a row or to set a row `notInService' + while the smLaunchOperStatus is `enabled' will result in + an inconsistentValue error. + + Attempts to `destroy' a row or to set a row `notInService' + where the value of the smLaunchStorageType object is + `permanent' or `readOnly' will result in an + inconsistentValue error. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smLaunchEntry 16 } + +smLaunchError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if an + attempt to launch a script fails. Implementations must reset + the error message to a zero-length string when a new attempt + to launch a script is started." + DEFVAL { ''H } + ::= { smLaunchEntry 17 } + +smLaunchLastChange OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when this launch table entry was last + modified. The value '0000000000000000'H is returned if + the launch table entry has not yet been modified. + + Note that a change of smLaunchStart, smLaunchControl, + smLaunchRunIndexNext, smLaunchRowExpireTime, or the + resetting of smLaunchError is not considered a change + of this launch table entry." + DEFVAL { '0000000000000000'H } + ::= { smLaunchEntry 18 } + +smLaunchRowExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object specifies how long this row remains + in the `enabled' or `disabled' operational state. The value + reported by this object ticks backwards. When the value + reaches 0, it stops ticking backward and the row is + deleted if there are no smRunTable entries associated with + + this smLaunchTable entry. Otherwise, the smLaunchOperStatus + changes to `expired' and the row deletion is deferred + until there are no smRunTable entries associated with this + smLaunchTable entry. + + The smLaunchRowExpireTime will not tick backwards if it is + set to its maximum value (2147483647). In other words, + setting this object to its maximum value turns the timer + off. + + The value of this object may be set in order to increase + or reduce the remaining time that the launch table entry + may be used. Setting the value to 0 will cause an immediate + row deletion or transition into the `expired' operational + state. + + It is not possible to set this object while the operational + status is `expired'. Attempts to modify this object while + the operational status is `expired' leads to an + inconsistentValue error. + + Note that the timer ticks backwards independent of the + operational state of the launch table entry." + DEFVAL { 2147483647 } + ::= { smLaunchEntry 19 } + +smRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes scripts that are currently + running or have been running in the past." + ::= { smRunObjects 2 } + +smRunEntry OBJECT-TYPE + SYNTAX SmRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular running or finished + script." + INDEX { smLaunchOwner, smLaunchName, smRunIndex } + ::= { smRunTable 1 } + +SmRunEntry ::= SEQUENCE { + smRunIndex Integer32, + smRunArgument OCTET STRING, + smRunStartTime DateAndTime, + smRunEndTime DateAndTime, + smRunLifeTime TimeInterval, + smRunExpireTime TimeInterval, + smRunExitCode INTEGER, + smRunResult OCTET STRING, + smRunControl INTEGER, + smRunState INTEGER, + smRunError SnmpAdminString, + smRunResultTime DateAndTime, + smRunErrorTime DateAndTime +} + +smRunIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this running or finished script. This value must be + unique for all rows in the smRunTable with the same + smLaunchOwner and smLaunchName. + + Note that the data type and the range of this object must + be consistent with the definition of smLaunchRunIndexNext + and smLaunchStart." + ::= { smRunEntry 1 } + +smRunArgument OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The argument supplied to the script when it started." + DEFVAL { ''H } + ::= { smRunEntry 2 } + +smRunStartTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the execution started. The value + '0000000000000000'H is returned if the script has not + started yet." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 3 } + +smRunEndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the execution terminated. The value + '0000000000000000'H is returned if the script has not + terminated yet." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 4 } + +smRunLifeTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies how long the script can execute. + This object returns the remaining time that the script + may run. The object is initialized with the value of the + associated smLaunchLifeTime object and ticks backwards. + The script is aborted immediately when the value reaches 0. + + The value of this object may be set in order to increase or + reduce the remaining time that the script may run. Setting + this value to 0 will abort script execution immediately, + and, if the value of smRunExpireTime is also 0, will remove + this entry from the smRunTable once it has terminated. + + If smRunLifeTime is set to its maximum value (2147483647), + either by a set operation or by its initialization from the + smLaunchLifeTime object, then it will not tick backwards. + A running script with a maximum smRunLifeTime value will + thus never be terminated with a `lifeTimeExceeded' exit + code. + + The value of smRunLifeTime reflects the real-time execution + time as seen by the outside world. The value of this object + will always be 0 for a script that finished execution, that + is smRunState has the value `terminated'. + + The value of smRunLifeTime does not change while a script + is suspended, that is smRunState has the value `suspended'. + Note that this does not affect set operations. It is legal + to modify smRunLifeTime via set operations while a script + is suspended." + ::= { smRunEntry 5 } + +smRunExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object specifies how long this row can + exist in the smRunTable after the script has terminated. + This object returns the remaining time that the row may + exist before it is aged out. The object is initialized with + the value of the associated smLaunchExpireTime object and + ticks backwards. The entry in the smRunTable is destroyed + when the value reaches 0 and the smRunState has the value + `terminated'. + + The value of this object may be set in order to increase or + reduce the remaining time that the row may exist. Setting + the value to 0 will destroy this entry as soon as the + smRunState has the value `terminated'." + ::= { smRunEntry 6 } + +smRunExitCode OBJECT-TYPE + SYNTAX INTEGER { + noError(1), + halted(2), + lifeTimeExceeded(3), + noResourcesLeft(4), + languageError(5), + runtimeError(6), + invalidArgument(7), + securityViolation(8), + genericError(9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the reason why a + script finished execution. The smRunExitCode code may have + one of the following values: + + - `noError', which indicates that the script completed + successfully without errors; + + - `halted', which indicates that the script was halted + by a request from an authorized manager; + + - `lifeTimeExceeded', which indicates that the script + exited because a time limit was exceeded; + + - `noResourcesLeft', which indicates that the script + exited because it ran out of resources (e.g. memory); + + - `languageError', which indicates that the script exited + because of a language error (e.g. a syntax error in an + interpreted language); + + - `runtimeError', which indicates that the script exited + due to a runtime error (e.g. a division by zero); + + - `invalidArgument', which indicates that the script could + not be run because of invalid script arguments; + + - `securityViolation', which indicates that the script + exited due to a security violation; + + - `genericError', which indicates that the script exited + for an unspecified reason. + + If the script has not yet begun running, or is currently + running, the value will be `noError'." + DEFVAL { noError } + ::= { smRunEntry 7 } + +smRunResult OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The result value produced by the running script. Note that + the result may change while the script is executing." + DEFVAL { ''H } + ::= { smRunEntry 8 } + +smRunControl OBJECT-TYPE + SYNTAX INTEGER { + abort(1), + suspend(2), + resume(3), + nop(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of the + script execution defined by this row. + + Setting this object to `abort' will abort execution if the + + value of smRunState is `initializing', `executing', + `suspending', `suspended' or `resuming'. Setting this object + to `abort' when the value of smRunState is `aborting' or + `terminated', or if the implementation can determine that + the attempt to abort the execution would fail, will result + in an inconsistentValue error. + + Setting this object to `suspend' will suspend execution + if the value of smRunState is `executing'. Setting this + object to `suspend' will cause an inconsistentValue error + if the value of smRunState is not `executing' or if the + implementation can determine that the attempt to suspend + the execution would fail. + + Setting this object to `resume' will resume execution + if the value of smRunState is `suspending' or + `suspended'. Setting this object to `resume' will cause an + inconsistentValue error if the value of smRunState is + not `suspended' or if the implementation can determine + that the attempt to resume the execution would fail. + + Setting this object to nop(4) has no effect." + DEFVAL { nop } + ::= { smRunEntry 9 } + +smRunState OBJECT-TYPE + SYNTAX INTEGER { + initializing(1), + executing(2), + suspending(3), + suspended(4), + resuming(5), + aborting(6), + terminated(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the script's execution + state. If the script has been invoked but has not yet + begun execution, the value will be `initializing'. If the + script is running, the value will be `executing'. + + A running script which received a request to suspend + execution first transitions into a temporary `suspending' + state. The temporary `suspending' state changes to + `suspended' when the script has actually been suspended. The + temporary `suspending' state changes back to `executing' if + + the attempt to suspend the running script fails. + + A suspended script which received a request to resume + execution first transitions into a temporary `resuming' + state. The temporary `resuming' state changes to `running' + when the script has actually been resumed. The temporary + `resuming' state changes back to `suspended' if the attempt + to resume the suspended script fails. + + A script which received a request to abort execution but + which is still running first transitions into a temporary + `aborting' state. + + A script which has finished its execution is `terminated'." + ::= { smRunEntry 10 } + +smRunError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if the + script startup or execution raised an abnormal condition. + An implementation must store a descriptive error message + in this object if the script exits with the smRunExitCode + `genericError'." + DEFVAL { ''H } + ::= { smRunEntry 11 } + +smRunResultTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the smRunResult was last updated. + The value '0000000000000000'H is returned if smRunResult + has not yet been updated after the creation of this + smRunTable entry." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 12 } + +smRunErrorTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the smRunError was last updated. + The value '0000000000000000'H is returned if smRunError + + has not yet been updated after the creation of this + smRunTable entry." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 13 } + +-- +-- Notifications. The definition of smTraps makes notification +-- registrations reversible (see STD 58, RFC 2578). +-- + +smTraps OBJECT IDENTIFIER ::= { smNotifications 0 } + +smScriptAbort NOTIFICATION-TYPE + OBJECTS { smRunExitCode, smRunEndTime, smRunError } + STATUS current + DESCRIPTION + "This notification is generated whenever a running script + terminates with an smRunExitCode unequal to `noError'." + ::= { smTraps 1 } + +smScriptResult NOTIFICATION-TYPE + OBJECTS { smRunResult } + STATUS current + DESCRIPTION + "This notification can be used by scripts to notify other + management applications about results produced by the + script. + + This notification is not automatically generated by the + Script MIB implementation. It is the responsibility of + the executing script to emit this notification where it + is appropriate to do so." + ::= { smTraps 2 } + +smScriptException NOTIFICATION-TYPE + OBJECTS { smRunError } + STATUS current + DESCRIPTION + "This notification can be used by scripts to notify other + management applications about script errors. + + This notification is not automatically generated by the + Script MIB implementation. It is the responsibility of + the executing script or the runtime system to emit this + notification where it is appropriate to do so." + ::= { smTraps 3 } + +-- conformance information + +smCompliances OBJECT IDENTIFIER ::= { smConformance 1 } +smGroups OBJECT IDENTIFIER ::= { smConformance 2 } + +-- compliance statements + +smCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which implement + the Script MIB." + MODULE -- this module + MANDATORY-GROUPS { + smLanguageGroup, smScriptGroup2, smLaunchGroup2, + smRunGroup2, smNotificationsGroup2 + } + GROUP smCodeGroup + DESCRIPTION + "The smCodeGroup is mandatory only for those implementations + that support the downloading of scripts via SNMP." + OBJECT smScriptSource + MIN-ACCESS read-only + DESCRIPTION + "The smScriptSource object is read-only for implementations + that are not able to download script code from a URL." + OBJECT smCodeText + DESCRIPTION + "A compliant implementation need only support write access to + the smCodeText object only during row creation." + OBJECT smLaunchArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smLaunchArgument of 255 octets." + OBJECT smRunArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunArgument of 255 octets." + OBJECT smRunResult + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunResult of 255 octets." + OBJECT smRunState + DESCRIPTION + "A compliant implementation does not have to support script + suspension and the smRunState `suspended'. Such an + implementation will change into the `suspending' state + when the smRunControl is set to `suspend' and remain in this + state until smRunControl is set to `resume' or the script + terminates." + ::= { smCompliances 2 } + +smLanguageGroup OBJECT-GROUP + OBJECTS { + smLangLanguage, smLangVersion, + smLangVendor, smLangRevision, + smLangDescr, smExtsnExtension, + smExtsnVersion, smExtsnVendor, + smExtsnRevision, smExtsnDescr + } + STATUS current + DESCRIPTION + "A collection of objects providing information about the + capabilities of the scripting engine." + ::= { smGroups 1 } + +smScriptGroup2 OBJECT-GROUP + OBJECTS { + smScriptDescr, smScriptLanguage, + smScriptSource, smScriptAdminStatus, + smScriptOperStatus, smScriptStorageType, + smScriptRowStatus, smScriptError, + smScriptLastChange + } + STATUS current + DESCRIPTION + "A collection of objects providing information about + installed scripts." + ::= { smGroups 7 } + +smCodeGroup OBJECT-GROUP + OBJECTS { + smCodeText, smCodeRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects used to download or modify scripts + by using SNMP set requests." + ::= { smGroups 3 } + +smLaunchGroup2 OBJECT-GROUP + OBJECTS { + smLaunchScriptOwner, smLaunchScriptName, + smLaunchArgument, smLaunchMaxRunning, + smLaunchMaxCompleted, smLaunchLifeTime, + smLaunchExpireTime, smLaunchStart, + smLaunchControl, smLaunchAdminStatus, + smLaunchOperStatus, smLaunchRunIndexNext, + smLaunchStorageType, smLaunchRowStatus, + smLaunchError, smLaunchLastChange, + smLaunchRowExpireTime + } + STATUS current + DESCRIPTION + "A collection of objects providing information about scripts + that can be launched." + ::= { smGroups 8 } + +smRunGroup2 OBJECT-GROUP + OBJECTS { + smRunArgument, smRunStartTime, + smRunEndTime, smRunLifeTime, + smRunExpireTime, smRunExitCode, + smRunResult, smRunState, + smRunControl, smRunError, + smRunResultTime, smRunErrorTime + } + STATUS current + DESCRIPTION + "A collection of objects providing information about running + scripts." + ::= { smGroups 9 } + +smNotificationsGroup2 NOTIFICATION-GROUP + NOTIFICATIONS { + smScriptAbort, + smScriptResult, + smScriptException + } + STATUS current + DESCRIPTION + "The notifications emitted by the Script MIB." + ::= { smGroups 10 } + +-- +-- Deprecated compliance and conformance group definitions +-- from RFC 2592. +-- + +smCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for SNMP entities which implement + the Script MIB." + MODULE -- this module + MANDATORY-GROUPS { + + smLanguageGroup, smScriptGroup, smLaunchGroup, smRunGroup + } + GROUP smCodeGroup + DESCRIPTION + "The smCodeGroup is mandatory only for those implementations + that support the downloading of scripts via SNMP." + OBJECT smScriptSource + MIN-ACCESS read-only + DESCRIPTION + "The smScriptSource object is read-only for implementations + that are not able to download script code from a URL." + OBJECT smCodeText + DESCRIPTION + "A compliant implementation need only support write access + to the smCodeText object during row creation." + OBJECT smLaunchArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smLaunchArgument of 255 octets." + OBJECT smRunArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunArgument of 255 octets." + OBJECT smRunResult + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunResult of 255 octets." + OBJECT smRunState + DESCRIPTION + "A compliant implementation does not have to support script + suspension and the smRunState `suspended'. Such an + implementation will change into the `suspending' state + when the smRunControl is set to `suspend' and remain in this + state until smRunControl is set to `resume' or the script + terminates." + ::= { smCompliances 1 } + +smScriptGroup OBJECT-GROUP + OBJECTS { + smScriptDescr, smScriptLanguage, + smScriptSource, smScriptAdminStatus, + smScriptOperStatus, smScriptStorageType, + smScriptRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about + installed scripts." + ::= { smGroups 2 } + +smLaunchGroup OBJECT-GROUP + OBJECTS { + smLaunchScriptOwner, smLaunchScriptName, + smLaunchArgument, smLaunchMaxRunning, + smLaunchMaxCompleted, smLaunchLifeTime, + smLaunchExpireTime, smLaunchStart, + smLaunchControl, smLaunchAdminStatus, + smLaunchOperStatus, smLaunchRunIndexNext, + smLaunchStorageType, smLaunchRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about scripts + that can be launched." + ::= { smGroups 4 } + +smRunGroup OBJECT-GROUP + OBJECTS { + smRunArgument, smRunStartTime, + smRunEndTime, smRunLifeTime, + smRunExpireTime, smRunExitCode, + smRunResult, smRunState, + smRunControl, smRunError + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about running + scripts." + ::= { smGroups 5 } + +smNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + smScriptAbort, + smScriptResult + } + STATUS deprecated + DESCRIPTION + "The notifications emitted by the Script MIB." + ::= { smGroups 6 } + +END

Added: trunk/mibs/EtherLike-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/EtherLike-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,1862 @@ +EtherLike-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, + Integer32, Counter32, Counter64, mib-2, transmission + FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + TruthValue + FROM SNMPv2-TC + ifIndex, InterfaceIndex + FROM IF-MIB; + + etherMIB MODULE-IDENTITY + LAST-UPDATED "200309190000Z" -- September 19, 2003 + ORGANIZATION "IETF Ethernet Interfaces and Hub MIB + Working Group" + CONTACT-INFO + "WG E-mail: hubmib@ietf.org + To subscribe: hubmib-request@ietf.org + + Chair: Dan Romascanu + Postal: Avaya Inc. + Atidum Technology Park, Bldg. 3 + Tel Aviv 61131 + Israel + Tel: +972 3 645 8414 + E-mail: dromasca@avaya.com + + Editor: John Flick + Postal: Hewlett-Packard Company + 8000 Foothills Blvd. M/S 5557 + Roseville, CA 95747-5557 + USA + Tel: +1 916 785 4018 + Fax: +1 916 785 1199 + E-mail: johnf@rose.hp.com" + DESCRIPTION "The MIB module to describe generic objects for + ethernet-like network interfaces. + + The following reference is used throughout this + MIB module: + + [IEEE 802.3 Std] refers to: + IEEE Std 802.3, 2002 Edition: 'IEEE Standard + + for Information technology - + Telecommunications and information exchange + between systems - Local and metropolitan + area networks - Specific requirements - + Part 3: Carrier sense multiple access with + collision detection (CSMA/CD) access method + and physical layer specifications', as + amended by IEEE Std 802.3ae-2002: + 'Amendment: Media Access Control (MAC) + Parameters, Physical Layer, and Management + Parameters for 10 Gb/s Operation', August, + 2002. + + Of particular interest is Clause 30, '10 Mb/s, + 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'. + + Copyright (C) The Internet Society (2003). This + version of this MIB module is part of RFC 3635; + see the RFC itself for full legal notices." + + REVISION "200309190000Z" -- September 19, 2003 + DESCRIPTION "Updated to include support for 10 Gb/sec + interfaces. This resulted in the following + revisions: + + - Updated dot3StatsAlignmentErrors and + dot3StatsSymbolErrors DESCRIPTIONs to + reflect behaviour at 10 Gb/s + - Added dot3StatsRateControlAbility and + dot3RateControlStatus for management + of the Rate Control function in 10 Gb/s + WAN applications + - Added 64-bit versions of all counters + that are used on high-speed ethernet + interfaces + - Added object groups to contain the new + objects + - Deprecated etherStatsBaseGroup and + split into etherStatsBaseGroup2 and + etherStatsHalfDuplexGroup, so that + interfaces which can only operate at + full-duplex do not need to implement + half-duplex-only statistics + - Deprecated dot3Compliance and replaced + it with dot3Compliance2, which includes + the compliance information for the new + object groups + + In addition, the dot3Tests and dot3Errors + object identities have been deprecated, + since there is no longer a standard method + for using them. + + This version published as RFC 3635." + + REVISION "199908240400Z" -- August 24, 1999 + DESCRIPTION "Updated to include support for 1000 Mb/sec + interfaces and full-duplex interfaces. + This version published as RFC 2665." + + REVISION "199806032150Z" -- June 3, 1998 + DESCRIPTION "Updated to include support for 100 Mb/sec + interfaces. + This version published as RFC 2358." + + REVISION "199402030400Z" -- February 3, 1994 + DESCRIPTION "Initial version, published as RFC 1650." + ::= { mib-2 35 } + + etherMIBObjects OBJECT IDENTIFIER ::= { etherMIB 1 } + + dot3 OBJECT IDENTIFIER ::= { transmission 7 } + + -- the Ethernet-like Statistics group + + dot3StatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Statistics for a collection of ethernet-like + interfaces attached to a particular system. + There will be one row in this table for each + ethernet-like interface in the system." + ::= { dot3 2 } + + dot3StatsEntry OBJECT-TYPE + SYNTAX Dot3StatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "Statistics for a particular interface to an + ethernet-like medium." + INDEX { dot3StatsIndex } + ::= { dot3StatsTable 1 } + + Dot3StatsEntry ::= + SEQUENCE { + + dot3StatsIndex InterfaceIndex, + dot3StatsAlignmentErrors Counter32, + dot3StatsFCSErrors Counter32, + dot3StatsSingleCollisionFrames Counter32, + dot3StatsMultipleCollisionFrames Counter32, + dot3StatsSQETestErrors Counter32, + dot3StatsDeferredTransmissions Counter32, + dot3StatsLateCollisions Counter32, + dot3StatsExcessiveCollisions Counter32, + dot3StatsInternalMacTransmitErrors Counter32, + dot3StatsCarrierSenseErrors Counter32, + dot3StatsFrameTooLongs Counter32, + dot3StatsInternalMacReceiveErrors Counter32, + dot3StatsEtherChipSet OBJECT IDENTIFIER, + dot3StatsSymbolErrors Counter32, + dot3StatsDuplexStatus INTEGER, + dot3StatsRateControlAbility TruthValue, + dot3StatsRateControlStatus INTEGER + } + + dot3StatsIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only -- read-only since originally an + -- SMIv1 index + STATUS current + DESCRIPTION "An index value that uniquely identifies an + interface to an ethernet-like medium. The + interface identified by a particular value of + this index is the same interface as identified + by the same value of ifIndex." + REFERENCE "RFC 2863, ifIndex" + ::= { dot3StatsEntry 1 } + + dot3StatsAlignmentErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that are not an integral number of + octets in length and do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the alignmentError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + + to the error status presented to the LLC. + + This counter does not increment for group + encoding schemes greater than 4 bits per group. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsAlignmentErrors object for 10 Gb/s + or faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.7, + aAlignmentErrors" + ::= { dot3StatsEntry 2 } + + dot3StatsFCSErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that are an integral number of octets + in length but do not pass the FCS check. This + count does not include frames received with + frame-too-long or frame-too-short error. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + Note: Coding errors detected by the physical + layer for speeds above 10 Mb/s will cause the + frame to fail the FCS check. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsFCSErrors object for 10 Gb/s or + faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.6, + aFrameCheckSequenceErrors." + ::= { dot3StatsEntry 3 } + + dot3StatsSingleCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames that are involved in a single + collision, and are subsequently transmitted + successfully. + + A frame that is counted by an instance of this + object is also counted by the corresponding + instance of either the ifOutUcastPkts, + ifOutMulticastPkts, or ifOutBroadcastPkts, + and is not counted by the corresponding + instance of the dot3StatsMultipleCollisionFrames + object. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.3, + aSingleCollisionFrames." + ::= { dot3StatsEntry 4 } + + dot3StatsMultipleCollisionFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames that are involved in more + + than one collision and are subsequently + transmitted successfully. + + A frame that is counted by an instance of this + object is also counted by the corresponding + instance of either the ifOutUcastPkts, + ifOutMulticastPkts, or ifOutBroadcastPkts, + and is not counted by the corresponding + instance of the dot3StatsSingleCollisionFrames + object. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.4, + aMultipleCollisionFrames." + ::= { dot3StatsEntry 5 } + + dot3StatsSQETestErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of times that the SQE TEST ERROR + is received on a particular interface. The + SQE TEST ERROR is set in accordance with the + rules for verification of the SQE detection + mechanism in the PLS Carrier Sense Function as + described in IEEE Std. 802.3, 2000 Edition, + section 7.2.4.6. + + This counter does not increment on interfaces + operating at speeds greater than 10 Mb/s, or on + interfaces operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4, + aSQETestErrors." + ::= { dot3StatsEntry 6 } + + dot3StatsDeferredTransmissions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which the first + transmission attempt on a particular interface + is delayed because the medium is busy. + + The count represented by an instance of this + object does not include frames involved in + collisions. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.9, + aFramesWithDeferredXmissions." + ::= { dot3StatsEntry 7 } + + dot3StatsLateCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of times that a collision is + detected on a particular interface later than + one slotTime into the transmission of a packet. + + A (late) collision included in a count + represented by an instance of this object is + also considered as a (generic) collision for + purposes of other collision-related + statistics. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.10, + aLateCollisions." + ::= { dot3StatsEntry 8 } + + dot3StatsExcessiveCollisions OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which transmission on a + particular interface fails due to excessive + collisions. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.11, + aFramesAbortedDueToXSColls." + ::= { dot3StatsEntry 9 } + + dot3StatsInternalMacTransmitErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which transmission on a + particular interface fails due to an internal + MAC sublayer transmit error. A frame is only + counted by an instance of this object if it is + not counted by the corresponding instance of + either the dot3StatsLateCollisions object, the + dot3StatsExcessiveCollisions object, or the + dot3StatsCarrierSenseErrors object. + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of transmission + errors on a particular interface that are not + otherwise counted. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsInternalMacTransmitErrors object for + 10 Gb/s or faster interfaces. + + Discontinuities in the value of this counter can + + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.12, + aFramesLostDueToIntMACXmitError." + ::= { dot3StatsEntry 10 } + + dot3StatsCarrierSenseErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of times that the carrier sense + condition was lost or never asserted when + attempting to transmit a frame on a particular + interface. + + The count represented by an instance of this + object is incremented at most once per + transmission attempt, even if the carrier sense + condition fluctuates during a transmission + attempt. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.13, + aCarrierSenseErrors." + ::= { dot3StatsEntry 11 } + + -- { dot3StatsEntry 12 } is not assigned + + dot3StatsFrameTooLongs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that exceed the maximum permitted + frame size. + + The count represented by an instance of this + object is incremented when the frameTooLong + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 80 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsFrameTooLongs object for 10 Gb/s + or faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.25, + aFrameTooLongErrors." + ::= { dot3StatsEntry 13 } + + -- { dot3StatsEntry 14 } is not assigned + + -- { dot3StatsEntry 15 } is not assigned + + dot3StatsInternalMacReceiveErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which reception on a + particular interface fails due to an internal + MAC sublayer receive error. A frame is only + counted by an instance of this object if it is + not counted by the corresponding instance of + either the dot3StatsFrameTooLongs object, the + dot3StatsAlignmentErrors object, or the + dot3StatsFCSErrors object. + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of receive errors + on a particular interface that are not + otherwise counted. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsInternalMacReceiveErrors object for + 10 Gb/s or faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15, + aFramesLostDueToIntMACRcvError." + ::= { dot3StatsEntry 16 } + + dot3StatsEtherChipSet OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION "******** THIS OBJECT IS DEPRECATED ******** + + This object contains an OBJECT IDENTIFIER + which identifies the chipset used to + realize the interface. Ethernet-like + interfaces are typically built out of + several different chips. The MIB implementor + is presented with a decision of which chip + to identify via this object. The implementor + should identify the chip which is usually + called the Medium Access Control chip. + If no such chip is easily identifiable, + the implementor should identify the chip + which actually gathers the transmit + and receive statistics and error + indications. This would allow a + manager station to correlate the + statistics and the chip generating + them, giving it the ability to take + into account any known anomalies + in the chip. + + This object has been deprecated. Implementation + feedback indicates that it is of limited use for + debugging network problems in the field, and + the administrative overhead involved in + maintaining a registry of chipset OIDs is not + justified." + ::= { dot3StatsEntry 17 } + + dot3StatsSymbolErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "For an interface operating at 100 Mb/s, the + number of times there was an invalid data symbol + when a valid carrier was present. + + For an interface operating in half-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than slotTime, and + during which there was at least one occurrence + of an event that causes the PHY to indicate + 'Data reception error' or 'carrier extend error' + on the GMII. + + For an interface operating in full-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than minFrameSize, + and during which there was at least one + occurrence of an event that causes the PHY to + indicate 'Data reception error' on the GMII. + + For an interface operating at 10 Gb/s, the + number of times the receiving media is non-idle + (a carrier event) for a period of time equal to + or greater than minFrameSize, and during which + there was at least one occurrence of an event + that causes the PHY to indicate 'Receive Error' + on the XGMII. + + The count represented by an instance of this + object is incremented at most once per carrier + event, even if multiple symbol errors occur + during the carrier event. This count does + not increment if a collision is present. + + This counter does not increment when the + interface is operating at 10 Mb/s. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCStatsSymbolErrors object for 10 Gb/s + or faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.2.1.5, + aSymbolErrorDuringCarrier." + ::= { dot3StatsEntry 18 } + + dot3StatsDuplexStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + halfDuplex(2), + fullDuplex(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current mode of operation of the MAC + entity. 'unknown' indicates that the current + duplex mode could not be determined. + + Management control of the duplex mode is + accomplished through the MAU MIB. When + an interface does not support autonegotiation, + or when autonegotiation is not enabled, the + duplex mode is controlled using + ifMauDefaultType. When autonegotiation is + supported and enabled, duplex mode is controlled + using ifMauAutoNegAdvertisedBits. In either + case, the currently operating duplex mode is + reflected both in this object and in ifMauType. + + Note that this object provides redundant + information with ifMauType. Normally, redundant + objects are discouraged. However, in this + instance, it allows a management application to + determine the duplex status of an interface + without having to know every possible value of + ifMauType. This was felt to be sufficiently + valuable to justify the redundancy." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.32, + aDuplexStatus." + ::= { dot3StatsEntry 19 } + + dot3StatsRateControlAbility OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION "'true' for interfaces operating at speeds above + 1000 Mb/s that support Rate Control through + lowering the average data rate of the MAC + sublayer, with frame granularity, and 'false' + otherwise." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.33, + aRateControlAbility." + ::= { dot3StatsEntry 20 } + + dot3StatsRateControlStatus OBJECT-TYPE + SYNTAX INTEGER { + rateControlOff(1), + rateControlOn(2), + unknown(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The current Rate Control mode of operation of + the MAC sublayer of this interface." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.34, + aRateControlStatus." + ::= { dot3StatsEntry 21 } + + -- the Ethernet-like Collision Statistics group + + -- Implementation of this group is optional; it is appropriate + -- for all systems which have the necessary metering + + dot3CollTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3CollEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A collection of collision histograms for a + particular set of interfaces." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.30, + aCollisionFrames." + ::= { dot3 5 } + + dot3CollEntry OBJECT-TYPE + SYNTAX Dot3CollEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A cell in the histogram of per-frame + collisions for a particular interface. An + + instance of this object represents the + frequency of individual MAC frames for which + the transmission (successful or otherwise) on a + particular interface is accompanied by a + particular number of media collisions." + INDEX { ifIndex, dot3CollCount } + ::= { dot3CollTable 1 } + + Dot3CollEntry ::= + SEQUENCE { + dot3CollCount Integer32, + dot3CollFrequencies Counter32 + } + + -- { dot3CollEntry 1 } is no longer in use + + dot3CollCount OBJECT-TYPE + SYNTAX Integer32 (1..16) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "The number of per-frame media collisions for + which a particular collision histogram cell + represents the frequency on a particular + interface." + ::= { dot3CollEntry 2 } + + dot3CollFrequencies OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of individual MAC frames for which the + transmission (successful or otherwise) on a + particular interface occurs after the + frame has experienced exactly the number + of collisions in the associated + dot3CollCount object. + + For example, a frame which is transmitted + on interface 77 after experiencing + exactly 4 collisions would be indicated + by incrementing only dot3CollFrequencies.77.4. + No other instance of dot3CollFrequencies would + be incremented in this example. + + This counter does not increment when the + interface is operating in full-duplex mode. + + Discontinuities in the value of this counter can + + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + ::= { dot3CollEntry 3 } + + dot3ControlTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3ControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table of descriptive and status information + about the MAC Control sublayer on the + ethernet-like interfaces attached to a + particular system. There will be one row in + this table for each ethernet-like interface in + the system which implements the MAC Control + sublayer. If some, but not all, of the + ethernet-like interfaces in the system implement + the MAC Control sublayer, there will be fewer + rows in this table than in the dot3StatsTable." + ::= { dot3 9 } + + dot3ControlEntry OBJECT-TYPE + SYNTAX Dot3ControlEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the table, containing information + about the MAC Control sublayer on a single + ethernet-like interface." + INDEX { dot3StatsIndex } + ::= { dot3ControlTable 1 } + + Dot3ControlEntry ::= + SEQUENCE { + dot3ControlFunctionsSupported BITS, + dot3ControlInUnknownOpcodes Counter32, + dot3HCControlInUnknownOpcodes Counter64 + } + + dot3ControlFunctionsSupported OBJECT-TYPE + SYNTAX BITS { + pause(0) -- 802.3 flow control + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A list of the possible MAC Control functions + implemented for this interface." + REFERENCE "[IEEE 802.3 Std.], 30.3.3.2, + aMACControlFunctionsSupported." + ::= { dot3ControlEntry 1 } + + dot3ControlInUnknownOpcodes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames received on this + interface that contain an opcode that is not + supported by this device. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCControlInUnknownOpcodes object for 10 Gb/s + or faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.3.5, + aUnsupportedOpcodesReceived" + ::= { dot3ControlEntry 2 } + + dot3HCControlInUnknownOpcodes OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames received on this + interface that contain an opcode that is not + supported by this device. + + This counter is a 64 bit version of + dot3ControlInUnknownOpcodes. It should be used + on interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.3.5, + aUnsupportedOpcodesReceived" + ::= { dot3ControlEntry 3 } + + dot3PauseTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3PauseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table of descriptive and status information + about the MAC Control PAUSE function on the + ethernet-like interfaces attached to a + particular system. There will be one row in + this table for each ethernet-like interface in + the system which supports the MAC Control PAUSE + function (i.e., the 'pause' bit in the + corresponding instance of + dot3ControlFunctionsSupported is set). If some, + but not all, of the ethernet-like interfaces in + the system implement the MAC Control PAUSE + function (for example, if some interfaces only + support half-duplex), there will be fewer rows + in this table than in the dot3StatsTable." + ::= { dot3 10 } + + dot3PauseEntry OBJECT-TYPE + SYNTAX Dot3PauseEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry in the table, containing information + about the MAC Control PAUSE function on a single + ethernet-like interface." + INDEX { dot3StatsIndex } + ::= { dot3PauseTable 1 } + + Dot3PauseEntry ::= + + SEQUENCE { + dot3PauseAdminMode INTEGER, + dot3PauseOperMode INTEGER, + dot3InPauseFrames Counter32, + dot3OutPauseFrames Counter32, + dot3HCInPauseFrames Counter64, + dot3HCOutPauseFrames Counter64 + } + + dot3PauseAdminMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabledXmit(2), + enabledRcv(3), + enabledXmitAndRcv(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION "This object is used to configure the default + administrative PAUSE mode for this interface. + + This object represents the + administratively-configured PAUSE mode for this + interface. If auto-negotiation is not enabled + or is not implemented for the active MAU + attached to this interface, the value of this + object determines the operational PAUSE mode + of the interface whenever it is operating in + full-duplex mode. In this case, a set to this + object will force the interface into the + specified mode. + + If auto-negotiation is implemented and enabled + for the MAU attached to this interface, the + PAUSE mode for this interface is determined by + auto-negotiation, and the value of this object + denotes the mode to which the interface will + automatically revert if/when auto-negotiation is + later disabled. Note that when auto-negotiation + is running, administrative control of the PAUSE + mode may be accomplished using the + ifMauAutoNegCapAdvertisedBits object in the + MAU-MIB. + + Note that the value of this object is ignored + when the interface is not operating in + full-duplex mode. + + An attempt to set this object to + 'enabledXmit(2)' or 'enabledRcv(3)' will fail + on interfaces that do not support operation + at greater than 100 Mb/s." + ::= { dot3PauseEntry 1 } + + dot3PauseOperMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabledXmit(2), + enabledRcv(3), + enabledXmitAndRcv(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This object reflects the PAUSE mode currently + + in use on this interface, as determined by + either (1) the result of the auto-negotiation + function or (2) if auto-negotiation is not + enabled or is not implemented for the active MAU + attached to this interface, by the value of + dot3PauseAdminMode. Interfaces operating at + 100 Mb/s or less will never return + 'enabledXmit(2)' or 'enabledRcv(3)'. Interfaces + operating in half-duplex mode will always return + 'disabled(1)'. Interfaces on which + auto-negotiation is enabled but not yet + completed should return the value + 'disabled(1)'." + ::= { dot3PauseEntry 2 } + + dot3InPauseFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames received on this + interface with an opcode indicating the PAUSE + operation. + + This counter does not increment when the + interface is operating in half-duplex mode. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCInPauseFrames object for 10 Gb/s or + faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.4.3, + aPAUSEMACCtrlFramesReceived." + ::= { dot3PauseEntry 3 } + + dot3OutPauseFrames OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames transmitted on + this interface with an opcode indicating the + PAUSE operation. + + This counter does not increment when the + interface is operating in half-duplex mode. + + For interfaces operating at 10 Gb/s, this + counter can roll over in less than 5 minutes if + it is incrementing at its maximum rate. Since + that amount of time could be less than a + management station's poll cycle time, in order + to avoid a loss of information, a management + station is advised to poll the + dot3HCOutPauseFrames object for 10 Gb/s or + faster interfaces. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.4.2, + aPAUSEMACCtrlFramesTransmitted." + ::= { dot3PauseEntry 4 } + + dot3HCInPauseFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames received on this + interface with an opcode indicating the PAUSE + operation. + + This counter does not increment when the + interface is operating in half-duplex mode. + + This counter is a 64 bit version of + dot3InPauseFrames. It should be used on + interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.4.3, + aPAUSEMACCtrlFramesReceived." + ::= { dot3PauseEntry 5 } + + dot3HCOutPauseFrames OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of MAC Control frames transmitted on + this interface with an opcode indicating the + PAUSE operation. + + This counter does not increment when the + interface is operating in half-duplex mode. + + This counter is a 64 bit version of + dot3OutPauseFrames. It should be used on + interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.4.2, + aPAUSEMACCtrlFramesTransmitted." + ::= { dot3PauseEntry 6 } + + dot3HCStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot3HCStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "A table containing 64-bit versions of error + counters from the dot3StatsTable. The 32-bit + versions of these counters may roll over quite + quickly on higher speed ethernet interfaces. + The counters that have 64-bit versions in this + table are the counters that apply to full-duplex + interfaces, since 10 Gb/s and faster + ethernet-like interfaces do not support + half-duplex, and very few 1000 Mb/s + ethernet-like interfaces support half-duplex. + + Entries in this table are recommended for + interfaces capable of operating at 1000 Mb/s or + faster, and are required for interfaces capable + of operating at 10 Gb/s or faster. Lower speed + ethernet-like interfaces do not need entries in + this table, in which case there may be fewer + entries in this table than in the + dot3StatsTable. However, implementations + containing interfaces with a mix of speeds may + choose to implement entries in this table for + + all ethernet-like interfaces." + ::= { dot3 11 } + + dot3HCStatsEntry OBJECT-TYPE + SYNTAX Dot3HCStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "An entry containing 64-bit statistics for a + single ethernet-like interface." + INDEX { dot3StatsIndex } + ::= { dot3HCStatsTable 1 } + + Dot3HCStatsEntry ::= + SEQUENCE { + dot3HCStatsAlignmentErrors Counter64, + dot3HCStatsFCSErrors Counter64, + dot3HCStatsInternalMacTransmitErrors Counter64, + dot3HCStatsFrameTooLongs Counter64, + dot3HCStatsInternalMacReceiveErrors Counter64, + dot3HCStatsSymbolErrors Counter64 + } + + dot3HCStatsAlignmentErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that are not an integral number of + octets in length and do not pass the FCS check. + + The count represented by an instance of this + object is incremented when the alignmentError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + This counter does not increment for group + encoding schemes greater than 4 bits per group. + + This counter is a 64 bit version of + dot3StatsAlignmentErrors. It should be used + on interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.7, + aAlignmentErrors" + ::= { dot3HCStatsEntry 1 } + + dot3HCStatsFCSErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that are an integral number of octets + in length but do not pass the FCS check. This + count does not include frames received with + frame-too-long or frame-too-short error. + + The count represented by an instance of this + object is incremented when the frameCheckError + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + Note: Coding errors detected by the physical + layer for speeds above 10 Mb/s will cause the + frame to fail the FCS check. + + This counter is a 64 bit version of + dot3StatsFCSErrors. It should be used on + interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.6, + aFrameCheckSequenceErrors." + ::= { dot3HCStatsEntry 2 } + + dot3HCStatsInternalMacTransmitErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which transmission on a + particular interface fails due to an internal + MAC sublayer transmit error. A frame is only + + counted by an instance of this object if it is + not counted by the corresponding instance of + either the dot3StatsLateCollisions object, the + dot3StatsExcessiveCollisions object, or the + dot3StatsCarrierSenseErrors object. + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of transmission + errors on a particular interface that are not + otherwise counted. + + This counter is a 64 bit version of + dot3StatsInternalMacTransmitErrors. It should + be used on interfaces operating at 10 Gb/s or + faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.12, + aFramesLostDueToIntMACXmitError." + ::= { dot3HCStatsEntry 3 } + + dot3HCStatsFrameTooLongs OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames received on a particular + interface that exceed the maximum permitted + frame size. + + The count represented by an instance of this + object is incremented when the frameTooLong + status is returned by the MAC service to the + LLC (or other MAC user). Received frames for + which multiple error conditions pertain are, + according to the conventions of IEEE 802.3 + Layer Management, counted exclusively according + to the error status presented to the LLC. + + This counter is a 64 bit version of + dot3StatsFrameTooLongs. It should be used on + interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.25, + aFrameTooLongErrors." + ::= { dot3HCStatsEntry 4 } + + dot3HCStatsInternalMacReceiveErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "A count of frames for which reception on a + particular interface fails due to an internal + MAC sublayer receive error. A frame is only + counted by an instance of this object if it is + not counted by the corresponding instance of + either the dot3StatsFrameTooLongs object, the + dot3StatsAlignmentErrors object, or the + dot3StatsFCSErrors object. + + The precise meaning of the count represented by + an instance of this object is implementation- + specific. In particular, an instance of this + object may represent a count of receive errors + on a particular interface that are not + otherwise counted. + + This counter is a 64 bit version of + dot3StatsInternalMacReceiveErrors. It should be + used on interfaces operating at 10 Gb/s or + faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15, + aFramesLostDueToIntMACRcvError." + ::= { dot3HCStatsEntry 5 } + + dot3HCStatsSymbolErrors OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION "For an interface operating at 100 Mb/s, the + number of times there was an invalid data symbol + when a valid carrier was present. + + For an interface operating in half-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than slotTime, and + during which there was at least one occurrence + of an event that causes the PHY to indicate + 'Data reception error' or 'carrier extend error' + on the GMII. + + For an interface operating in full-duplex mode + at 1000 Mb/s, the number of times the receiving + media is non-idle (a carrier event) for a period + of time equal to or greater than minFrameSize, + and during which there was at least one + occurrence of an event that causes the PHY to + indicate 'Data reception error' on the GMII. + + For an interface operating at 10 Gb/s, the + number of times the receiving media is non-idle + (a carrier event) for a period of time equal to + or greater than minFrameSize, and during which + there was at least one occurrence of an event + that causes the PHY to indicate 'Receive Error' + on the XGMII. + + The count represented by an instance of this + object is incremented at most once per carrier + event, even if multiple symbol errors occur + during the carrier event. This count does + not increment if a collision is present. + + This counter is a 64 bit version of + dot3StatsSymbolErrors. It should be used on + interfaces operating at 10 Gb/s or faster. + + Discontinuities in the value of this counter can + occur at re-initialization of the management + system, and at other times as indicated by the + value of ifCounterDiscontinuityTime." + REFERENCE "[IEEE 802.3 Std.], 30.3.2.1.5, + aSymbolErrorDuringCarrier." + ::= { dot3HCStatsEntry 6 } + + -- 802.3 Tests + + dot3Tests OBJECT IDENTIFIER ::= { dot3 6 } + + dot3Errors OBJECT IDENTIFIER ::= { dot3 7 } + + -- TDR Test + + dot3TestTdr OBJECT-IDENTITY + STATUS deprecated + DESCRIPTION "******** THIS IDENTITY IS DEPRECATED ******* + + The Time-Domain Reflectometry (TDR) test is + specific to ethernet-like interfaces of type + 10Base5 and 10Base2. The TDR value may be + useful in determining the approximate distance + to a cable fault. It is advisable to repeat + this test to check for a consistent resulting + TDR value, to verify that there is a fault. + + A TDR test returns as its result the time + interval, measured in 10 MHz ticks or 100 nsec + units, between the start of TDR test + transmission and the subsequent detection of a + collision or deassertion of carrier. On + successful completion of a TDR test, the result + is stored as the value of an appropriate + instance of an appropriate vendor specific MIB + object, and the OBJECT IDENTIFIER of that + instance is stored in the appropriate instance + of the appropriate test result code object + (thereby indicating where the result has been + stored). + + This object identity has been deprecated, since + the ifTestTable in the IF-MIB was deprecated, + and there is no longer a standard mechanism for + initiating an interface test. This left no + standard way of using this object identity." + ::= { dot3Tests 1 } + + -- Loopback Test + + dot3TestLoopBack OBJECT-IDENTITY + STATUS deprecated + DESCRIPTION "******** THIS IDENTITY IS DEPRECATED ******* + + This test configures the MAC chip and executes + an internal loopback test of memory, data paths, + and the MAC chip logic. This loopback test can + only be executed if the interface is offline. + Once the test has completed, the MAC chip should + + be reinitialized for network operation, but it + should remain offline. + + If an error occurs during a test, the + appropriate test result object will be set + to indicate a failure. The two OBJECT + IDENTIFIER values dot3ErrorInitError and + dot3ErrorLoopbackError may be used to provided + more information as values for an appropriate + test result code object. + + This object identity has been deprecated, since + the ifTestTable in the IF-MIB was deprecated, + and there is no longer a standard mechanism for + initiating an interface test. This left no + standard way of using this object identity." + ::= { dot3Tests 2 } + + dot3ErrorInitError OBJECT-IDENTITY + STATUS deprecated + DESCRIPTION "******** THIS IDENTITY IS DEPRECATED ******* + + Couldn't initialize MAC chip for test. + + This object identity has been deprecated, since + the ifTestTable in the IF-MIB was deprecated, + and there is no longer a standard mechanism for + initiating an interface test. This left no + standard way of using this object identity." + ::= { dot3Errors 1 } + + dot3ErrorLoopbackError OBJECT-IDENTITY + STATUS deprecated + DESCRIPTION "******** THIS IDENTITY IS DEPRECATED ******* + + Expected data not received (or not received + correctly) in loopback test. + + This object identity has been deprecated, since + the ifTestTable in the IF-MIB was deprecated, + and there is no longer a standard mechanism for + initiating an interface test. This left no + standard way of using this object identity." + ::= { dot3Errors 2 } + + -- { dot3 8 }, the dot3ChipSets tree, is defined in [RFC2666] + + -- conformance information + + etherConformance OBJECT IDENTIFIER ::= { etherMIB 2 } + + etherGroups OBJECT IDENTIFIER ::= { etherConformance 1 } + etherCompliances OBJECT IDENTIFIER ::= { etherConformance 2 } + + -- compliance statements + + etherCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ******** + + The compliance statement for managed network + entities which have ethernet-like network + interfaces. + + This compliance is deprecated and replaced by + dot3Compliance." + + MODULE -- this module + MANDATORY-GROUPS { etherStatsGroup } + + GROUP etherCollisionTableGroup + DESCRIPTION "This group is optional. It is appropriate + for all systems which have the necessary + metering. Implementation in such systems is + highly recommended." + ::= { etherCompliances 1 } + + ether100MbsCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ******** + + The compliance statement for managed network + entities which have 100 Mb/sec ethernet-like + network interfaces. + + This compliance is deprecated and replaced by + dot3Compliance." + + MODULE -- this module + MANDATORY-GROUPS { etherStats100MbsGroup } + + GROUP etherCollisionTableGroup + DESCRIPTION "This group is optional. It is appropriate + for all systems which have the necessary + metering. Implementation in such systems is + highly recommended." + ::= { etherCompliances 2 } + + dot3Compliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION "******** THIS COMPLIANCE IS DEPRECATED ******** + + The compliance statement for managed network + entities which have ethernet-like network + interfaces. + + This compliance is deprecated and replaced by + dot3Compliance2." + + MODULE -- this module + MANDATORY-GROUPS { etherStatsBaseGroup } + + GROUP etherDuplexGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating in full-duplex mode. + It is highly recommended for all + ethernet-like network interfaces." + + GROUP etherStatsLowSpeedGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at 10 Mb/s or slower in + half-duplex mode." + + GROUP etherStatsHighSpeedGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at 100 Mb/s or faster." + + GROUP etherControlGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control sublayer." + + GROUP etherControlPauseGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control PAUSE function." + + GROUP etherCollisionTableGroup + DESCRIPTION "This group is optional. It is appropriate + for all ethernet-like network interfaces + which are capable of operating in + half-duplex mode and have the necessary + metering. Implementation in systems with + + such interfaces is highly recommended." + ::= { etherCompliances 3 } + + dot3Compliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for managed network + entities which have ethernet-like network + interfaces. + + Note that compliance with this MIB module + requires compliance with the ifCompliance3 + MODULE-COMPLIANCE statement of the IF-MIB + (RFC2863). In addition, compliance with this + MIB module requires compliance with the + mauModIfCompl3 MODULE-COMPLIANCE statement of + the MAU-MIB (RFC3636)." + + MODULE -- this module + MANDATORY-GROUPS { etherStatsBaseGroup2 } + + GROUP etherDuplexGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating in full-duplex mode. + It is highly recommended for all + ethernet-like network interfaces." + + GROUP etherRateControlGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at speeds faster than + 1000 Mb/s. It is highly recommended for all + ethernet-like network interfaces." + + GROUP etherStatsLowSpeedGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at 10 Mb/s or slower in + half-duplex mode." + + GROUP etherStatsHighSpeedGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at 100 Mb/s or faster." + + GROUP etherStatsHalfDuplexGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + + capable of operating in half-duplex mode." + + GROUP etherHCStatsGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces which are + capable of operating at 10 Gb/s or faster. + It is recommended for all ethernet-like + network interfaces which are capable of + operating at 1000 Mb/s or faster." + + GROUP etherControlGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control sublayer." + + GROUP etherHCControlGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control sublayer and are + capable of operating at 10 Gb/s or faster." + + GROUP etherControlPauseGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control PAUSE function." + + GROUP etherHCControlPauseGroup + DESCRIPTION "This group is mandatory for all + ethernet-like network interfaces that + support the MAC Control PAUSE function and + are capable of operating at 10 Gb/s or + faster." + + GROUP etherCollisionTableGroup + DESCRIPTION "This group is optional. It is appropriate + for all ethernet-like network interfaces + which are capable of operating in + half-duplex mode and have the necessary + metering. Implementation in systems with + such interfaces is highly recommended." + ::= { etherCompliances 4 } + + -- units of conformance + + etherStatsGroup OBJECT-GROUP + OBJECTS { dot3StatsIndex, + dot3StatsAlignmentErrors, + dot3StatsFCSErrors, + dot3StatsSingleCollisionFrames, + dot3StatsMultipleCollisionFrames, + dot3StatsSQETestErrors, + dot3StatsDeferredTransmissions, + dot3StatsLateCollisions, + dot3StatsExcessiveCollisions, + dot3StatsInternalMacTransmitErrors, + dot3StatsCarrierSenseErrors, + dot3StatsFrameTooLongs, + dot3StatsInternalMacReceiveErrors, + dot3StatsEtherChipSet + } + STATUS deprecated + DESCRIPTION "********* THIS GROUP IS DEPRECATED ********** + + A collection of objects providing information + applicable to all ethernet-like network + interfaces. + + This object group has been deprecated and + replaced by etherStatsBaseGroup and + etherStatsLowSpeedGroup." + ::= { etherGroups 1 } + + etherCollisionTableGroup OBJECT-GROUP + OBJECTS { dot3CollFrequencies + } + STATUS current + DESCRIPTION "A collection of objects providing a histogram + of packets successfully transmitted after + experiencing exactly N collisions." + ::= { etherGroups 2 } + + etherStats100MbsGroup OBJECT-GROUP + OBJECTS { dot3StatsIndex, + dot3StatsAlignmentErrors, + dot3StatsFCSErrors, + dot3StatsSingleCollisionFrames, + dot3StatsMultipleCollisionFrames, + dot3StatsDeferredTransmissions, + dot3StatsLateCollisions, + dot3StatsExcessiveCollisions, + dot3StatsInternalMacTransmitErrors, + dot3StatsCarrierSenseErrors, + dot3StatsFrameTooLongs, + dot3StatsInternalMacReceiveErrors, + dot3StatsEtherChipSet, + dot3StatsSymbolErrors + + } + STATUS deprecated + DESCRIPTION "********* THIS GROUP IS DEPRECATED ********** + + A collection of objects providing information + applicable to 100 Mb/sec ethernet-like network + interfaces. + + This object group has been deprecated and + replaced by etherStatsBaseGroup and + etherStatsHighSpeedGroup." + ::= { etherGroups 3 } + + etherStatsBaseGroup OBJECT-GROUP + OBJECTS { dot3StatsIndex, + dot3StatsAlignmentErrors, + dot3StatsFCSErrors, + dot3StatsSingleCollisionFrames, + dot3StatsMultipleCollisionFrames, + dot3StatsDeferredTransmissions, + dot3StatsLateCollisions, + dot3StatsExcessiveCollisions, + dot3StatsInternalMacTransmitErrors, + dot3StatsCarrierSenseErrors, + dot3StatsFrameTooLongs, + dot3StatsInternalMacReceiveErrors + } + STATUS deprecated + DESCRIPTION "********* THIS GROUP IS DEPRECATED ********** + + A collection of objects providing information + applicable to all ethernet-like network + interfaces. + + This object group has been deprecated and + replaced by etherStatsBaseGroup2 and + etherStatsHalfDuplexGroup, to separate + objects which must be implemented by all + ethernet-like network interfaces from + objects that need only be implemented on + ethernet-like network interfaces that are + capable of half-duplex operation." + ::= { etherGroups 4 } + + etherStatsLowSpeedGroup OBJECT-GROUP + OBJECTS { dot3StatsSQETestErrors } + STATUS current + DESCRIPTION "A collection of objects providing information + + applicable to ethernet-like network interfaces + capable of operating at 10 Mb/s or slower in + half-duplex mode." + ::= { etherGroups 5 } + + etherStatsHighSpeedGroup OBJECT-GROUP + OBJECTS { dot3StatsSymbolErrors } + STATUS current + DESCRIPTION "A collection of objects providing information + applicable to ethernet-like network interfaces + capable of operating at 100 Mb/s or faster." + ::= { etherGroups 6 } + + etherDuplexGroup OBJECT-GROUP + OBJECTS { dot3StatsDuplexStatus } + STATUS current + DESCRIPTION "A collection of objects providing information + about the duplex mode of an ethernet-like + network interface." + ::= { etherGroups 7 } + + etherControlGroup OBJECT-GROUP + OBJECTS { dot3ControlFunctionsSupported, + dot3ControlInUnknownOpcodes + } + STATUS current + DESCRIPTION "A collection of objects providing information + about the MAC Control sublayer on ethernet-like + network interfaces." + ::= { etherGroups 8 } + + etherControlPauseGroup OBJECT-GROUP + OBJECTS { dot3PauseAdminMode, + dot3PauseOperMode, + dot3InPauseFrames, + dot3OutPauseFrames + } + STATUS current + DESCRIPTION "A collection of objects providing information + about and control of the MAC Control PAUSE + function on ethernet-like network interfaces." + ::= { etherGroups 9 } + + etherStatsBaseGroup2 OBJECT-GROUP + OBJECTS { dot3StatsIndex, + dot3StatsAlignmentErrors, + dot3StatsFCSErrors, + dot3StatsInternalMacTransmitErrors, + dot3StatsFrameTooLongs, + dot3StatsInternalMacReceiveErrors + } + STATUS current + DESCRIPTION "A collection of objects providing information + applicable to all ethernet-like network + interfaces." + ::= { etherGroups 10 } + + etherStatsHalfDuplexGroup OBJECT-GROUP + OBJECTS { dot3StatsSingleCollisionFrames, + dot3StatsMultipleCollisionFrames, + dot3StatsDeferredTransmissions, + dot3StatsLateCollisions, + dot3StatsExcessiveCollisions, + dot3StatsCarrierSenseErrors + } + STATUS current + DESCRIPTION "A collection of objects providing information + applicable only to half-duplex ethernet-like + network interfaces." + ::= { etherGroups 11 } + + etherHCStatsGroup OBJECT-GROUP + OBJECTS { dot3HCStatsAlignmentErrors, + dot3HCStatsFCSErrors, + dot3HCStatsInternalMacTransmitErrors, + dot3HCStatsFrameTooLongs, + dot3HCStatsInternalMacReceiveErrors, + dot3HCStatsSymbolErrors + } + STATUS current + DESCRIPTION "A collection of objects providing high-capacity + statistics applicable to higher-speed + ethernet-like network interfaces." + ::= { etherGroups 12 } + + etherHCControlGroup OBJECT-GROUP + OBJECTS { dot3HCControlInUnknownOpcodes } + STATUS current + DESCRIPTION "A collection of objects providing high-capacity + statistics for the MAC Control sublayer on + higher-speed ethernet-like network interfaces." + ::= { etherGroups 13 } + + etherHCControlPauseGroup OBJECT-GROUP + OBJECTS { dot3HCInPauseFrames, + dot3HCOutPauseFrames + + } + STATUS current + DESCRIPTION "A collection of objects providing high-capacity + statistics for the MAC Control PAUSE function on + higher-speed ethernet-like network interfaces." + ::= { etherGroups 14 } + + etherRateControlGroup OBJECT-GROUP + OBJECTS { dot3StatsRateControlAbility, + dot3StatsRateControlStatus + } + STATUS current + DESCRIPTION "A collection of objects providing information + about the Rate Control function on ethernet-like + interfaces." + ::= { etherGroups 15 } + +END

Added: trunk/mibs/HCNUM-TC.txt ============================================================================== --- (empty file) +++ trunk/mibs/HCNUM-TC.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,118 @@ +HCNUM-TC DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, mib-2, Counter64 + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC; + +hcnumTC MODULE-IDENTITY + LAST-UPDATED "200006080000Z" + + ORGANIZATION "IETF OPS Area" + CONTACT-INFO + " E-mail: mibs@ops.ietf.org + Subscribe: majordomo@psg.com + with msg body: subscribe mibs + + Andy Bierman + Cisco Systems Inc. + 170 West Tasman Drive + San Jose, CA 95134 USA + +1 408-527-3711 + abierman@cisco.com + + Keith McCloghrie + Cisco Systems Inc. + 170 West Tasman Drive + San Jose, CA 95134 USA + +1 408-526-5260 + kzm@cisco.com + + Randy Presuhn + BMC Software, Inc. + Office 1-3141 + 2141 North First Street + San Jose, California 95131 USA + +1 408 546-1006 + rpresuhn@bmc.com" + DESCRIPTION + "A MIB module containing textual conventions + for high capacity data types. This module + addresses an immediate need for data types not directly + supported in the SMIv2. This short-term solution + is meant to be deprecated as a long-term solution + is deployed." + REVISION "200006080000Z" + DESCRIPTION + "Initial Version of the High Capacity Numbers + MIB module, published as RFC 2856." + ::= { mib-2 78 } + +CounterBasedGauge64 ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The CounterBasedGauge64 type represents a non-negative + integer, which may increase or decrease, but shall never + exceed a maximum value, nor fall below a minimum value. The + maximum value can not be greater than 2^64-1 + (18446744073709551615 decimal), and the minimum value can + + not be smaller than 0. The value of a CounterBasedGauge64 + has its maximum value whenever the information being modeled + is greater than or equal to its maximum value, and has its + minimum value whenever the information being modeled is + smaller than or equal to its minimum value. If the + information being modeled subsequently decreases below + (increases above) the maximum (minimum) value, the + CounterBasedGauge64 also decreases (increases). + + Note that this TC is not strictly supported in SMIv2, + because the 'always increasing' and 'counter wrap' semantics + associated with the Counter64 base type are not preserved. + It is possible that management applications which rely + solely upon the (Counter64) ASN.1 tag to determine object + semantics will mistakenly operate upon objects of this type + as they would for Counter64 objects. + + This textual convention represents a limited and short-term + solution, and may be deprecated as a long term solution is + defined and deployed to replace it." + SYNTAX Counter64 + +ZeroBasedCounter64 ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This TC describes an object which counts events with the + following semantics: objects of this type will be set to + zero(0) on creation and will thereafter count appropriate + events, wrapping back to zero(0) when the value 2^64 is + reached. + + Provided that an application discovers the new object within + the minimum time to wrap it can use the initial value as a + delta since it last polled the table of which this object is + part. It is important for a management station to be aware + of this minimum time and the actual time between polls, and + to discard data if the actual time is too long or there is + no defined minimum time. + + Typically this TC is used in tables where the INDEX space is + constantly changing and/or the TimeFilter mechanism is in + use. + + Note that this textual convention does not retain all the + semantics of the Counter64 base type. Specifically, a + Counter64 has an arbitrary initial value, but objects + defined with this TC are required to start at the value + + zero. This behavior is not likely to have any adverse + effects on management applications which are expecting + Counter64 semantics. + + This textual convention represents a limited and short-term + solution, and may be deprecated as a long term solution is + defined and deployed to replace it." + SYNTAX Counter64 + +END

Added: trunk/mibs/HOST-RESOURCES-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/HOST-RESOURCES-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,1540 @@ +HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN + +IMPORTS +MODULE-IDENTITY, OBJECT-TYPE, mib-2, +Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI + +TEXTUAL-CONVENTION, DisplayString, +TruthValue, DateAndTime, AutonomousType FROM SNMPv2-TC + +MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + +InterfaceIndexOrZero FROM IF-MIB; + +hostResourcesMibModule MODULE-IDENTITY + LAST-UPDATED "200003060000Z" -- 6 March 2000 + ORGANIZATION "IETF Host Resources MIB Working Group" + CONTACT-INFO + "Steve Waldbusser + Postal: Lucent Technologies, Inc. + 1213 Innsbruck Dr. + Sunnyvale, CA 94089 + USA + Phone: 650-318-1251 + Fax: 650-318-1633 + Email: waldbusser@lucent.com + + In addition, the Host Resources MIB mailing list is + dedicated to discussion of this MIB. To join the + mailing list, send a request message to + hostmib-request@andrew.cmu.edu. The mailing list + address is hostmib@andrew.cmu.edu." + DESCRIPTION + "This MIB is for use in managing host systems. The term + `host' is construed to mean any computer that communicates + with other similar computers attached to the internet and + that is directly used by one or more human beings. Although + this MIB does not necessarily apply to devices whose primary + function is communications services (e.g., terminal servers, + routers, bridges, monitoring equipment), such relevance is + not explicitly precluded. This MIB instruments attributes + common to all internet hosts including, for example, both + personal computers and systems that run variants of Unix." + + REVISION "200003060000Z" -- 6 March 2000 + DESCRIPTION + "Clarifications and bug fixes based on implementation + experience. This revision was also reformatted in the SMIv2 + format. The revisions made were: + + New RFC document standards: + Added Copyright notice, updated introduction to SNMP + Framework, updated references section, added reference to + RFC 2119, and added a meaningful Security Considerations + section. + + New IANA considerations section for registration of new types + + Conversion to new SMIv2 syntax for the following types and + macros: + Counter32, Integer32, Gauge32, MODULE-IDENTITY, + OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY, + MODULE-COMPLIANCE, OBJECT-GROUP + + Used new Textual Conventions: + TruthValue, DateAndTime, AutonomousType, + InterfaceIndexOrZero + + Fixed typo in hrPrinterStatus. + + Added missing error bits to hrPrinterDetectedErrorState and + clarified confusion resulting from suggested mappings to + hrPrinterStatus. + + Clarified that size of objects of type + InternationalDisplayString is number of octets, not number + of encoded symbols. + + Clarified the use of the following objects based on + implementation experience: + hrSystemInitialLoadDevice, hrSystemInitialLoadParameters, + hrMemorySize, hrStorageSize, hrStorageAllocationFailures, + hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex, + hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU, + and hrSWInstalledDate. + + Clarified implementation technique for hrSWInstalledTable. + + Used new AUGMENTS clause for hrSWRunPerfTable. + + Added Internationalization Considerations section. + +This revision published as RFC2790." + + REVISION "9910202200Z" -- 20 October, 1999 + DESCRIPTION + "The original version of this MIB, published as + RFC1514." + ::= { hrMIBAdminInfo 1 } + +host OBJECT IDENTIFIER ::= { mib-2 25 } + +hrSystem OBJECT IDENTIFIER ::= { host 1 } +hrStorage OBJECT IDENTIFIER ::= { host 2 } +hrDevice OBJECT IDENTIFIER ::= { host 3 } +hrSWRun OBJECT IDENTIFIER ::= { host 4 } +hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 } +hrSWInstalled OBJECT IDENTIFIER ::= { host 6 } +hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 } + +-- textual conventions + +KBytes ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Storage size, expressed in units of 1024 bytes." + SYNTAX Integer32 (0..2147483647) + +ProductID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This textual convention is intended to identify the + + manufacturer, model, and version of a specific + hardware or software product. It is suggested that + these OBJECT IDENTIFIERs are allocated such that all + products from a particular manufacturer are registered + under a subtree distinct to that manufacturer. In + addition, all versions of a product should be + registered under a subtree distinct to that product. + With this strategy, a management station may uniquely + determine the manufacturer and/or model of a product + whose productID is unknown to the management station. + Objects of this type may be useful for inventory + purposes or for automatically detecting + incompatibilities or version mismatches between + various hardware and software components on a system. + + For example, the product ID for the ACME 4860 66MHz + clock doubled processor might be: + enterprises.acme.acmeProcessors.a4860DX2.MHz66 + + A software product might be registered as: + enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1) + " + SYNTAX OBJECT IDENTIFIER + +-- unknownProduct will be used for any unknown ProductID +-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 } + +InternationalDisplayString ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type is used to model textual information + in some character set. A network management station + should use a local algorithm to determine which + character set is in use and how it should be + displayed. Note that this character set may be + encoded with more than one octet per symbol, but will + most often be NVT ASCII. When a size clause is + specified for an object of this type, the size refers + to the length in octets, not the number of symbols." + SYNTAX OCTET STRING + +-- The Host Resources System Group + +hrSystemUptime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of time since this host was last + initialized. Note that this is different from + sysUpTime in the SNMPv2-MIB [RFC1907] because + sysUpTime is the uptime of the network management + portion of the system." + ::= { hrSystem 1 } + +hrSystemDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The host's notion of the local date and time of day." + ::= { hrSystem 2 } + +hrSystemInitialLoadDevice OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The index of the hrDeviceEntry for the device from + which this host is configured to load its initial + operating system configuration (i.e., which operating + system code and/or boot parameters). + + Note that writing to this object just changes the + configuration that will be used the next time the + operating system is loaded and does not actually cause + the reload to occur." + ::= { hrSystem 3 } + +hrSystemInitialLoadParameters OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object contains the parameters (e.g. a pathname + and parameter) supplied to the load device when + requesting the initial operating system configuration + from that device. + + Note that writing to this object just changes the + configuration that will be used the next time the + operating system is loaded and does not actually cause + the reload to occur." + ::= { hrSystem 4 } + +hrSystemNumUsers OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of user sessions for which this host is + storing state information. A session is a collection + of processes requiring a single act of user + authentication and possibly subject to collective job + control." + ::= { hrSystem 5 } + +hrSystemProcesses OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of process contexts currently loaded or + running on this system." + ::= { hrSystem 6 } + +hrSystemMaxProcesses OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of process contexts this system + can support. If there is no fixed maximum, the value + should be zero. On systems that have a fixed maximum, + this object can help diagnose failures that occur when + this maximum is reached." + ::= { hrSystem 7 } + +-- The Host Resources Storage Group + +-- Registration point for storage types, for use with hrStorageType. +-- These are defined in the HOST-RESOURCES-TYPES module. +hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 } + +hrMemorySize OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of physical read-write main memory, + typically RAM, contained by the host." + ::= { hrStorage 2 } + +hrStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of logical storage areas on + the host. + + An entry shall be placed in the storage table for each + logical area of storage that is allocated and has + fixed resource limits. The amount of storage + represented in an entity is the amount actually usable + by the requesting entity, and excludes loss due to + formatting or file system reference information. + + These entries are associated with logical storage + areas, as might be seen by an application, rather than + physical storage entities which are typically seen by + an operating system. Storage such as tapes and + floppies without file systems on them are typically + not allocated in chunks by the operating system to + requesting applications, and therefore shouldn't + appear in this table. Examples of valid storage for + this table include disk partitions, file systems, ram + (for some architectures this is further segmented into + regular memory, extended memory, and so on), backing + store for virtual memory (`swap space'). + + This table is intended to be a useful diagnostic for + `out of memory' and `out of buffers' types of + failures. In addition, it can be a useful performance + monitoring tool for tracking memory, disk, or buffer + usage." + ::= { hrStorage 3 } + +hrStorageEntry OBJECT-TYPE + SYNTAX HrStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one logical storage area on + the host. As an example, an instance of the + hrStorageType object might be named hrStorageType.3" + INDEX { hrStorageIndex } + ::= { hrStorageTable 1 } + +HrStorageEntry ::= SEQUENCE { + hrStorageIndex Integer32, + hrStorageType AutonomousType, + hrStorageDescr DisplayString, + hrStorageAllocationUnits Integer32, + hrStorageSize Integer32, + hrStorageUsed Integer32, + hrStorageAllocationFailures Counter32 + } + +hrStorageIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each logical storage area + contained by the host." + ::= { hrStorageEntry 1 } + +hrStorageType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of storage represented by this entry." + ::= { hrStorageEntry 2 } + +hrStorageDescr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the type and instance of the storage + described by this entry." + ::= { hrStorageEntry 3 } + +hrStorageAllocationUnits OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + UNITS "Bytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size, in bytes, of the data objects allocated + from this pool. If this entry is monitoring sectors, + blocks, buffers, or packets, for example, this number + will commonly be greater than one. Otherwise this + number will typically be one." + ::= { hrStorageEntry 4 } + +hrStorageSize OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The size of the storage represented by this entry, in + units of hrStorageAllocationUnits. This object is + writable to allow remote configuration of the size of + the storage area in those cases where such an + operation makes sense and is possible on the + underlying system. For example, the amount of main + memory allocated to a buffer pool might be modified or + the amount of disk space allocated to virtual memory + might be modified." + ::= { hrStorageEntry 5 } + +hrStorageUsed OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of the storage represented by this entry + that is allocated, in units of + hrStorageAllocationUnits." + ::= { hrStorageEntry 6 } + +hrStorageAllocationFailures OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of requests for storage represented by + this entry that could not be honored due to not enough + storage. It should be noted that as this object has a + SYNTAX of Counter32, that it does not have a defined + initial value. However, it is recommended that this + object be initialized to zero, even though management + stations must not depend on such an initialization." + ::= { hrStorageEntry 7 } + +-- The Host Resources Device Group +-- +-- The device group is useful for identifying and diagnosing the +-- devices on a system. The hrDeviceTable contains common +-- information for any type of device. In addition, some devices +-- have device-specific tables for more detailed information. More +-- such tables may be defined in the future for other device types. + +-- Registration point for device types, for use with hrDeviceType. + +-- These are defined in the HOST-RESOURCES-TYPES module. +hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 } + +hrDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of devices contained by the + host." + ::= { hrDevice 2 } + +hrDeviceEntry OBJECT-TYPE + SYNTAX HrDeviceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one device contained by the + host. As an example, an instance of the hrDeviceType + object might be named hrDeviceType.3" + INDEX { hrDeviceIndex } + ::= { hrDeviceTable 1 } + +HrDeviceEntry ::= SEQUENCE { + hrDeviceIndex Integer32, + hrDeviceType AutonomousType, + hrDeviceDescr DisplayString, + hrDeviceID ProductID, + hrDeviceStatus INTEGER, + hrDeviceErrors Counter32 + } + +hrDeviceIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each device contained by the host. + The value for each device must remain constant at + least from one re-initialization of the agent to the + next re-initialization." + ::= { hrDeviceEntry 1 } + +hrDeviceType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the type of device. + + If this value is + `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry + exists in the hrProcessorTable which corresponds to + this device. + + If this value is + `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry + exists in the hrNetworkTable which corresponds to this + device. + + If this value is + `hrDevicePrinter { hrDeviceTypes 5 }', then an entry + exists in the hrPrinterTable which corresponds to this + device. + + If this value is + `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an + entry exists in the hrDiskStorageTable which + corresponds to this device." + ::= { hrDeviceEntry 2 } + +hrDeviceDescr OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this device, including the + device's manufacturer and revision, and optionally, + its serial number." + ::= { hrDeviceEntry 3 } + +hrDeviceID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID for this device." + ::= { hrDeviceEntry 4 } + +hrDeviceStatus OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + running(2), + warning(3), + testing(4), + down(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of the device described + by this row of the table. A value unknown(1) + indicates that the current state of the device is + unknown. running(2) indicates that the device is up + and running and that no unusual error conditions are + known. The warning(3) state indicates that agent has + been informed of an unusual error condition by the + operational software (e.g., a disk device driver) but + that the device is still 'operational'. An example + would be a high number of soft errors on a disk. A + value of testing(4), indicates that the device is not + available for use because it is in the testing state. + The state of down(5) is used only when the agent has + been informed that the device is not available for any + use." + ::= { hrDeviceEntry 5 } + +hrDeviceErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of errors detected on this device. It + should be noted that as this object has a SYNTAX of + Counter32, that it does not have a defined initial + value. However, it is recommended that this object be + initialized to zero, even though management stations + must not depend on such an initialization." + ::= { hrDeviceEntry 6 } + +hrProcessorTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of processors contained by the + host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceProcessor'." + ::= { hrDevice 3 } + +hrProcessorEntry OBJECT-TYPE + SYNTAX HrProcessorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one processor contained by + the host. The hrDeviceIndex in the index represents + the entry in the hrDeviceTable that corresponds to the + hrProcessorEntry. + + As an example of how objects in this table are named, + an instance of the hrProcessorFrwID object might be + named hrProcessorFrwID.3" + INDEX { hrDeviceIndex } + ::= { hrProcessorTable 1 } + +HrProcessorEntry ::= SEQUENCE { + hrProcessorFrwID ProductID, + hrProcessorLoad Integer32 + } + +hrProcessorFrwID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of the firmware associated with the + processor." + ::= { hrProcessorEntry 1 } + +hrProcessorLoad OBJECT-TYPE + SYNTAX Integer32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average, over the last minute, of the percentage + of time that this processor was not idle. + Implementations may approximate this one minute + smoothing period if necessary." + ::= { hrProcessorEntry 2 } + +hrNetworkTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrNetworkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of network devices contained + by the host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceNetwork'." + ::= { hrDevice 4 } + +hrNetworkEntry OBJECT-TYPE + SYNTAX HrNetworkEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one network device contained + by the host. The hrDeviceIndex in the index + represents the entry in the hrDeviceTable that + corresponds to the hrNetworkEntry. + + As an example of how objects in this table are named, + an instance of the hrNetworkIfIndex object might be + named hrNetworkIfIndex.3" + INDEX { hrDeviceIndex } + ::= { hrNetworkTable 1 } + +HrNetworkEntry ::= SEQUENCE { + hrNetworkIfIndex InterfaceIndexOrZero + } + +hrNetworkIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of ifIndex which corresponds to this + network device. If this device is not represented in + the ifTable, then this value shall be zero." + ::= { hrNetworkEntry 1 } + +hrPrinterTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrPrinterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of printers local to the host. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDevicePrinter'." + ::= { hrDevice 5 } + +hrPrinterEntry OBJECT-TYPE + SYNTAX HrPrinterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one printer local to the + host. The hrDeviceIndex in the index represents the + entry in the hrDeviceTable that corresponds to the + hrPrinterEntry. + + As an example of how objects in this table are named, + an instance of the hrPrinterStatus object might be + named hrPrinterStatus.3" + INDEX { hrDeviceIndex } + ::= { hrPrinterTable 1 } + +HrPrinterEntry ::= SEQUENCE { + hrPrinterStatus INTEGER, + hrPrinterDetectedErrorState OCTET STRING + } + +hrPrinterStatus OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + idle(3), + printing(4), + warmup(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current status of this printer device." + ::= { hrPrinterEntry 1 } + +hrPrinterDetectedErrorState OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object represents any error conditions detected + by the printer. The error conditions are encoded as + bits in an octet string, with the following + definitions: + + Condition Bit # + + lowPaper 0 + + noPaper 1 + lowToner 2 + noToner 3 + doorOpen 4 + jammed 5 + offline 6 + serviceRequested 7 + inputTrayMissing 8 + outputTrayMissing 9 + markerSupplyMissing 10 + outputNearFull 11 + outputFull 12 + inputTrayEmpty 13 + overduePreventMaint 14 + + Bits are numbered starting with the most significant + bit of the first byte being bit 0, the least + significant bit of the first byte being bit 7, the + most significant bit of the second byte being bit 8, + and so on. A one bit encodes that the condition was + detected, while a zero bit encodes that the condition + was not detected. + + This object is useful for alerting an operator to + specific warning or error conditions that may occur, + especially those requiring human intervention." + ::= { hrPrinterEntry 2 } + +hrDiskStorageTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrDiskStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of long-term storage devices + contained by the host. In particular, disk devices + accessed remotely over a network are not included + here. + + Note that this table is potentially sparse: a + (conceptual) entry exists only if the correspondent + value of the hrDeviceType object is + `hrDeviceDiskStorage'." + ::= { hrDevice 6 } + +hrDiskStorageEntry OBJECT-TYPE + SYNTAX HrDiskStorageEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one long-term storage device + contained by the host. The hrDeviceIndex in the index + represents the entry in the hrDeviceTable that + corresponds to the hrDiskStorageEntry. As an example, + an instance of the hrDiskStorageCapacity object might + be named hrDiskStorageCapacity.3" + INDEX { hrDeviceIndex } + ::= { hrDiskStorageTable 1 } + +HrDiskStorageEntry ::= SEQUENCE { + hrDiskStorageAccess INTEGER, + hrDiskStorageMedia INTEGER, + hrDiskStorageRemoveble TruthValue, + hrDiskStorageCapacity KBytes + } + +hrDiskStorageAccess OBJECT-TYPE + SYNTAX INTEGER { + readWrite(1), + readOnly(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication if this long-term storage device is + readable and writable or only readable. This should + reflect the media type, any write-protect mechanism, + and any device configuration that affects the entire + device." + ::= { hrDiskStorageEntry 1 } + +hrDiskStorageMedia OBJECT-TYPE + SYNTAX INTEGER { + other(1), + unknown(2), + hardDisk(3), + floppyDisk(4), + opticalDiskROM(5), + opticalDiskWORM(6), -- Write Once Read Many + opticalDiskRW(7), + ramDisk(8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of the type of media used in this long- + term storage device." + ::= { hrDiskStorageEntry 2 } + +hrDiskStorageRemoveble OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Denotes whether or not the disk media may be removed + from the drive." + ::= { hrDiskStorageEntry 3 } + +hrDiskStorageCapacity OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total size for this long-term storage device. If + the media is removable and is currently removed, this + value should be zero." + ::= { hrDiskStorageEntry 4 } + +hrPartitionTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of partitions for long-term + storage devices contained by the host. In particular, + partitions accessed remotely over a network are not + included here." + ::= { hrDevice 7 } + +hrPartitionEntry OBJECT-TYPE + SYNTAX HrPartitionEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one partition. The + hrDeviceIndex in the index represents the entry in the + hrDeviceTable that corresponds to the + hrPartitionEntry. + + As an example of how objects in this table are named, + an instance of the hrPartitionSize object might be + named hrPartitionSize.3.1" + INDEX { hrDeviceIndex, hrPartitionIndex } + ::= { hrPartitionTable 1 } + +HrPartitionEntry ::= SEQUENCE { + hrPartitionIndex Integer32, + hrPartitionLabel InternationalDisplayString, + hrPartitionID OCTET STRING, + hrPartitionSize KBytes, + hrPartitionFSIndex Integer32 + } + +hrPartitionIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each partition on this long-term + storage device. The value for each long-term storage + device must remain constant at least from one re- + initialization of the agent to the next re- + initialization." + ::= { hrPartitionEntry 1 } + +hrPartitionLabel OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this partition." + ::= { hrPartitionEntry 2 } + +hrPartitionID OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A descriptor which uniquely represents this partition + to the responsible operating system. On some systems, + this might take on a binary representation." + ::= { hrPartitionEntry 3 } + +hrPartitionSize OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of this partition." + ::= { hrPartitionEntry 4 } + +hrPartitionFSIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the file system mounted on this + partition. If no file system is mounted on this + partition, then this value shall be zero. Note that + multiple partitions may point to one file system, + denoting that that file system resides on those + partitions. Multiple file systems may not reside on + one partition." + ::= { hrPartitionEntry 5 } + +-- The File System Table + +-- Registration point for popular File System types, +-- for use with hrFSType. These are defined in the +-- HOST-RESOURCES-TYPES module. +hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 } + +hrFSTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of file systems local to this + host or remotely mounted from a file server. File + systems that are in only one user's environment on a + multi-user system will not be included in this table." + ::= { hrDevice 8 } + +hrFSEntry OBJECT-TYPE + SYNTAX HrFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one file system local to + this host or remotely mounted from a file server. + File systems that are in only one user's environment + on a multi-user system will not be included in this + table. + + As an example of how objects in this table are named, + an instance of the hrFSMountPoint object might be + named hrFSMountPoint.3" + INDEX { hrFSIndex } + ::= { hrFSTable 1 } + +HrFSEntry ::= SEQUENCE { + hrFSIndex Integer32, + hrFSMountPoint InternationalDisplayString, + hrFSRemoteMountPoint InternationalDisplayString, + hrFSType AutonomousType, + hrFSAccess INTEGER, + hrFSBootable TruthValue, + hrFSStorageIndex Integer32, + hrFSLastFullBackupDate DateAndTime, + hrFSLastPartialBackupDate DateAndTime + } + +hrFSIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each file system local to this + host. The value for each file system must remain + constant at least from one re-initialization of the + agent to the next re-initialization." + ::= { hrFSEntry 1 } + +hrFSMountPoint OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The path name of the root of this file system." + ::= { hrFSEntry 2 } + +hrFSRemoteMountPoint OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the name and/or address of the + server that this file system is mounted from. This + may also include parameters such as the mount point on + the remote file system. If this is not a remote file + system, this string should have a length of zero." + ::= { hrFSEntry 3 } + +hrFSType OBJECT-TYPE + SYNTAX AutonomousType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object identifies the type of this + file system." + ::= { hrFSEntry 4 } + +hrFSAccess OBJECT-TYPE + SYNTAX INTEGER { + readWrite(1), + readOnly(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication if this file system is logically + configured by the operating system to be readable and + writable or only readable. This does not represent + any local access-control policy, except one that is + applied to the file system as a whole." + ::= { hrFSEntry 5 } + +hrFSBootable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A flag indicating whether this file system is + bootable." + ::= { hrFSEntry 6 } + +hrFSStorageIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The index of the hrStorageEntry that represents + information about this file system. If there is no + such information available, then this value shall be + zero. The relevant storage entry will be useful in + tracking the percent usage of this file system and + diagnosing errors that may occur when it runs out of + space." + ::= { hrFSEntry 7 } + +hrFSLastFullBackupDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The last date at which this complete file system was + + copied to another storage device for backup. This + information is useful for ensuring that backups are + being performed regularly. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrFSEntry 8 } + +hrFSLastPartialBackupDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The last date at which a portion of this file system + was copied to another storage device for backup. This + information is useful for ensuring that backups are + being performed regularly. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrFSEntry 9 } + +-- The Host Resources Running Software Group +-- +-- The hrSWRunTable contains an entry for each distinct piece of +-- software that is running or loaded into physical or virtual +-- memory in preparation for running. This includes the host's +-- operating system, device drivers, and applications. + +hrSWOSIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of the hrSWRunIndex for the hrSWRunEntry + that represents the primary operating system running + on this host. This object is useful for quickly and + uniquely identifying that primary operating system." + ::= { hrSWRun 1 } + +hrSWRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of software running on the + host." + ::= { hrSWRun 2 } + +hrSWRunEntry OBJECT-TYPE + SYNTAX HrSWRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for one piece of software + running on the host Note that because the installed + software table only contains information for software + stored locally on this host, not every piece of + running software will be found in the installed + software table. This is true of software that was + loaded and run from a non-local source, such as a + network-mounted file system. + + As an example of how objects in this table are named, + an instance of the hrSWRunName object might be named + hrSWRunName.1287" + INDEX { hrSWRunIndex } + ::= { hrSWRunTable 1 } + +HrSWRunEntry ::= SEQUENCE { + hrSWRunIndex Integer32, + hrSWRunName InternationalDisplayString, + hrSWRunID ProductID, + hrSWRunPath InternationalDisplayString, + hrSWRunParameters InternationalDisplayString, + hrSWRunType INTEGER, + hrSWRunStatus INTEGER + } + +hrSWRunIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each piece of software running on + the host. Wherever possible, this should be the + system's native, unique identification number." + ::= { hrSWRunEntry 1 } + +hrSWRunName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this running piece of + software, including the manufacturer, revision, and + the name by which it is commonly known. If this + software was installed locally, this should be the + same string as used in the corresponding + hrSWInstalledName." + ::= { hrSWRunEntry 2 } + +hrSWRunID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of this running piece of software." + ::= { hrSWRunEntry 3 } + +hrSWRunPath OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the location on long-term storage + (e.g. a disk drive) from which this software was + loaded." + ::= { hrSWRunEntry 4 } + +hrSWRunParameters OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A description of the parameters supplied to this + software when it was initially loaded." + ::= { hrSWRunEntry 5 } + +hrSWRunType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + operatingSystem(2), + deviceDriver(3), + application(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this software." + ::= { hrSWRunEntry 6 } + +hrSWRunStatus OBJECT-TYPE + SYNTAX INTEGER { + running(1), + runnable(2), -- waiting for resource + -- (i.e., CPU, memory, IO) + notRunnable(3), -- loaded but waiting for event + invalid(4) -- not loaded + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The status of this running piece of software. + Setting this value to invalid(4) shall cause this + software to stop running and to be unloaded. Sets to + other values are not valid." + ::= { hrSWRunEntry 7 } + +-- The Host Resources Running Software Performance Group +-- +-- The hrSWRunPerfTable contains an entry corresponding to +-- each entry in the hrSWRunTable. + +hrSWRunPerfTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWRunPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of running software + performance metrics." + ::= { hrSWRunPerf 1 } + +hrSWRunPerfEntry OBJECT-TYPE + SYNTAX HrSWRunPerfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry containing software performance + metrics. As an example, an instance of the + hrSWRunPerfCPU object might be named + hrSWRunPerfCPU.1287" + AUGMENTS { hrSWRunEntry } -- This table augments information in + -- the hrSWRunTable. + ::= { hrSWRunPerfTable 1 } + +HrSWRunPerfEntry ::= SEQUENCE { + hrSWRunPerfCPU Integer32, + hrSWRunPerfMem KBytes +} + +hrSWRunPerfCPU OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of centi-seconds of the total system's CPU + resources consumed by this process. Note that on a + multi-processor system, this value may increment by + more than one centi-second in one centi-second of real + (wall clock) time." + ::= { hrSWRunPerfEntry 1 } + +hrSWRunPerfMem OBJECT-TYPE + SYNTAX KBytes + UNITS "KBytes" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real system memory allocated to + this process." + ::= { hrSWRunPerfEntry 2 } + +-- The Host Resources Installed Software Group +-- +-- The hrSWInstalledTable contains an entry for each piece +-- of software installed in long-term storage (e.g. a disk +-- drive) locally on this host. Note that this does not +-- include software loadable remotely from a network +-- server. +-- +-- Different implementations may track software in varying +-- ways. For example, while some implementations may track +-- executable files as distinct pieces of software, other +-- implementations may use other strategies such as keeping +-- track of software "packages" (e.g., related groups of files) +-- or keeping track of system or application "patches". +-- +-- This table is useful for identifying and inventorying +-- software on a host and for diagnosing incompatibility +-- and version mismatch problems between various pieces +-- of hardware and software. + +hrSWInstalledLastChange OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when an entry in the + hrSWInstalledTable was last added, renamed, or + deleted. Because this table is likely to contain many + entries, polling of this object allows a management + station to determine when re-downloading of the table + might be useful." + ::= { hrSWInstalled 1 } + +hrSWInstalledLastUpdateTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime when the hrSWInstalledTable + was last completely updated. Because caching of this + data will be a popular implementation strategy, + retrieval of this object allows a management station + to obtain a guarantee that no data in this table is + older than the indicated time." + ::= { hrSWInstalled 2 } + +hrSWInstalledTable OBJECT-TYPE + SYNTAX SEQUENCE OF HrSWInstalledEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of software installed on this + host." + ::= { hrSWInstalled 3 } + +hrSWInstalledEntry OBJECT-TYPE + SYNTAX HrSWInstalledEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A (conceptual) entry for a piece of software + installed on this host. + + As an example of how objects in this table are named, + an instance of the hrSWInstalledName object might be + named hrSWInstalledName.96" + INDEX { hrSWInstalledIndex } + ::= { hrSWInstalledTable 1 } + +HrSWInstalledEntry ::= SEQUENCE { + hrSWInstalledIndex Integer32, + hrSWInstalledName InternationalDisplayString, + hrSWInstalledID ProductID, + hrSWInstalledType INTEGER, + hrSWInstalledDate DateAndTime +} + +hrSWInstalledIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A unique value for each piece of software installed + on the host. This value shall be in the range from 1 + to the number of pieces of software installed on the + host." + ::= { hrSWInstalledEntry 1 } + +hrSWInstalledName OBJECT-TYPE + SYNTAX InternationalDisplayString (SIZE (0..64)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of this installed piece of + software, including the manufacturer, revision, the + name by which it is commonly known, and optionally, + its serial number." + ::= { hrSWInstalledEntry 2 } + +hrSWInstalledID OBJECT-TYPE + SYNTAX ProductID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The product ID of this installed piece of software." + ::= { hrSWInstalledEntry 3 } + +hrSWInstalledType OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + operatingSystem(2), + deviceDriver(3), + application(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of this software." + ::= { hrSWInstalledEntry 4 } + +hrSWInstalledDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The last-modification date of this application as it + would appear in a directory listing. + + If this information is not known, then this variable + shall have the value corresponding to January 1, year + 0000, 00:00:00.0, which is encoded as + (hex)'00 00 01 01 00 00 00 00'." + ::= { hrSWInstalledEntry 5 } + +-- Conformance information + +hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 } +hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 } + +-- Compliance Statements +hrMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The requirements for conformance to the Host Resources MIB." + MODULE -- this module + MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup, + hrDeviceGroup } + + OBJECT hrSystemDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrSystemInitialLoadDevice + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrSystemInitialLoadParameters + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrStorageSize + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrFSLastFullBackupDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT hrFSLastPartialBackupDate + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + GROUP hrSWRunGroup + DESCRIPTION + "The Running Software Group. Implementation + of this group is mandatory only when the + hrSWRunPerfGroup is implemented." + + OBJECT hrSWRunStatus + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + GROUP hrSWRunPerfGroup + DESCRIPTION + "The Running Software Performance Group. + Implementation of this group is at the discretion + of the implementor." + + GROUP hrSWInstalledGroup + DESCRIPTION + "The Installed Software Group. + Implementation of this group is at the discretion + of the implementor." + ::= { hrMIBCompliances 1 } + + hrSystemGroup OBJECT-GROUP + OBJECTS { + hrSystemUptime, hrSystemDate, + hrSystemInitialLoadDevice, + hrSystemInitialLoadParameters, + hrSystemNumUsers, hrSystemProcesses, + hrSystemMaxProcesses + } + STATUS current + DESCRIPTION + "The Host Resources System Group." + ::= { hrMIBGroups 1 } + + hrStorageGroup OBJECT-GROUP + OBJECTS { + hrMemorySize, hrStorageIndex, hrStorageType, + hrStorageDescr, hrStorageAllocationUnits, + hrStorageSize, hrStorageUsed, + hrStorageAllocationFailures + } + STATUS current + DESCRIPTION + "The Host Resources Storage Group." + ::= { hrMIBGroups 2 } + + hrDeviceGroup OBJECT-GROUP + OBJECTS { + hrDeviceIndex, hrDeviceType, hrDeviceDescr, + hrDeviceID, hrDeviceStatus, hrDeviceErrors, + hrProcessorFrwID, hrProcessorLoad, + hrNetworkIfIndex, hrPrinterStatus, + hrPrinterDetectedErrorState, + hrDiskStorageAccess, hrDiskStorageMedia, + hrDiskStorageRemoveble, hrDiskStorageCapacity, + hrPartitionIndex, hrPartitionLabel, + hrPartitionID, hrPartitionSize, + hrPartitionFSIndex, hrFSIndex, hrFSMountPoint, + hrFSRemoteMountPoint, hrFSType, hrFSAccess, + hrFSBootable, hrFSStorageIndex, + hrFSLastFullBackupDate, + hrFSLastPartialBackupDate + } + STATUS current + DESCRIPTION + "The Host Resources Device Group." + ::= { hrMIBGroups 3 } + + hrSWRunGroup OBJECT-GROUP + OBJECTS { + hrSWOSIndex, hrSWRunIndex, hrSWRunName, + hrSWRunID, hrSWRunPath, hrSWRunParameters, + hrSWRunType, hrSWRunStatus + } + STATUS current + DESCRIPTION + "The Host Resources Running Software Group." + ::= { hrMIBGroups 4 } + + hrSWRunPerfGroup OBJECT-GROUP + OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem } + STATUS current + DESCRIPTION + "The Host Resources Running Software + Performance Group." + ::= { hrMIBGroups 5 } + + hrSWInstalledGroup OBJECT-GROUP + OBJECTS { + hrSWInstalledLastChange, + hrSWInstalledLastUpdateTime, + hrSWInstalledIndex, hrSWInstalledName, + hrSWInstalledID, hrSWInstalledType, + hrSWInstalledDate + } + STATUS current + DESCRIPTION + "The Host Resources Installed Software Group." + ::= { hrMIBGroups 6 } + +END

Added: trunk/mibs/HOST-RESOURCES-TYPES.txt ============================================================================== --- (empty file) +++ trunk/mibs/HOST-RESOURCES-TYPES.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,389 @@ +HOST-RESOURCES-TYPES DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI + hrMIBAdminInfo, hrStorage, hrDevice FROM HOST-RESOURCES-MIB; + +hostResourcesTypesModule MODULE-IDENTITY + LAST-UPDATED "200003060000Z" -- 6 March, 2000 + ORGANIZATION "IETF Host Resources MIB Working Group" + CONTACT-INFO + "Steve Waldbusser + Postal: Lucent Technologies, Inc. + 1213 Innsbruck Dr. + Sunnyvale, CA 94089 + USA + Phone: 650-318-1251 + Fax: 650-318-1633 + Email: waldbusser@ins.com + + In addition, the Host Resources MIB mailing list is dedicated + to discussion of this MIB. To join the mailing list, send a + request message to hostmib-request@andrew.cmu.edu. The mailing + list address is hostmib@andrew.cmu.edu." + DESCRIPTION + "This MIB module registers type definitions for + storage types, device types, and file system types. + + After the initial revision, this module will be + maintained by IANA." + REVISION "200003060000Z" -- 6 March 2000 + DESCRIPTION + "The original version of this module, published as RFC + 2790." + ::= { hrMIBAdminInfo 4 } + +-- Registrations for some storage types, for use with hrStorageType +hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 } + +hrStorageOther OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used when no other defined + type is appropriate." + ::= { hrStorageTypes 1 } + +hrStorageRam OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for RAM." + ::= { hrStorageTypes 2 } + +hrStorageVirtualMemory OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for virtual memory, + temporary storage of swapped or paged memory." + ::= { hrStorageTypes 3 } + +hrStorageFixedDisk OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for non-removable + rigid rotating magnetic storage devices." + ::= { hrStorageTypes 4 } + +hrStorageRemovableDisk OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for removable rigid + rotating magnetic storage devices." + ::= { hrStorageTypes 5 } + +hrStorageFloppyDisk OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for non-rigid rotating + magnetic storage devices." + ::= { hrStorageTypes 6 } + +hrStorageCompactDisc OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for read-only rotating + optical storage devices." + ::= { hrStorageTypes 7 } + +hrStorageRamDisk OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for a file system that + is stored in RAM." + ::= { hrStorageTypes 8 } + +hrStorageFlashMemory OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for flash memory." + ::= { hrStorageTypes 9 } + +hrStorageNetworkDisk OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The storage type identifier used for a + networked file system." + ::= { hrStorageTypes 10 } + +-- Registrations for some device types, for use with hrDeviceType +hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 } + +hrDeviceOther OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used when no other defined + type is appropriate." + ::= { hrDeviceTypes 1 } + +hrDeviceUnknown OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used when the device type is + unknown." + ::= { hrDeviceTypes 2 } + +hrDeviceProcessor OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a CPU." + ::= { hrDeviceTypes 3 } + +hrDeviceNetwork OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a network interface." + ::= { hrDeviceTypes 4 } + +hrDevicePrinter OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a printer." + ::= { hrDeviceTypes 5 } + +hrDeviceDiskStorage OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a disk drive." + ::= { hrDeviceTypes 6 } + +hrDeviceVideo OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a video device." + ::= { hrDeviceTypes 10 } + +hrDeviceAudio OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for an audio device." + ::= { hrDeviceTypes 11 } + +hrDeviceCoprocessor OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a co-processor." + ::= { hrDeviceTypes 12 } + +hrDeviceKeyboard OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a keyboard device." + ::= { hrDeviceTypes 13 } + +hrDeviceModem OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a modem." + ::= { hrDeviceTypes 14 } + +hrDeviceParallelPort OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a parallel port." + ::= { hrDeviceTypes 15 } + +hrDevicePointing OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a pointing device + (e.g., a mouse)." + ::= { hrDeviceTypes 16 } + +hrDeviceSerialPort OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a serial port." + ::= { hrDeviceTypes 17 } + +hrDeviceTape OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a tape storage device." + ::= { hrDeviceTypes 18 } + +hrDeviceClock OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a clock device." + ::= { hrDeviceTypes 19 } + +hrDeviceVolatileMemory OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a volatile memory + storage device." + ::= { hrDeviceTypes 20 } + +hrDeviceNonVolatileMemory OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The device type identifier used for a non-volatile memory + + storage device." + ::= { hrDeviceTypes 21 } + +-- Registrations for some popular File System types, +-- for use with hrFSType. +hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 } + +hrFSOther OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used when no other + defined type is appropriate." + ::= { hrFSTypes 1 } + +hrFSUnknown OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used when the type of + file system is unknown." + ::= { hrFSTypes 2 } + +hrFSBerkeleyFFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Berkeley Fast File System." + ::= { hrFSTypes 3 } + +hrFSSys5FS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + System V File System." + ::= { hrFSTypes 4 } + +hrFSFat OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for + DOS's FAT file system." + ::= { hrFSTypes 5 } + +hrFSHPFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for OS/2's + High Performance File System." + ::= { hrFSTypes 6 } + +hrFSHFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Macintosh Hierarchical File System." + ::= { hrFSTypes 7 } + +hrFSMFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Macintosh File System." + ::= { hrFSTypes 8 } + +hrFSNTFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Windows NT File System." + ::= { hrFSTypes 9 } + +hrFSVNode OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + VNode File System." + ::= { hrFSTypes 10 } + +hrFSJournaled OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Journaled File System." + ::= { hrFSTypes 11 } + +hrFSiso9660 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + ISO 9660 File System for CD's." + ::= { hrFSTypes 12 } + +hrFSRockRidge OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + RockRidge File System for CD's." + ::= { hrFSTypes 13 } + +hrFSNFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + NFS File System." + ::= { hrFSTypes 14 } + +hrFSNetware OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Netware File System." + ::= { hrFSTypes 15 } + +hrFSAFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Andrew File System." + ::= { hrFSTypes 16 } + +hrFSDFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + OSF DCE Distributed File System." + ::= { hrFSTypes 17 } + +hrFSAppleshare OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + AppleShare File System." + ::= { hrFSTypes 18 } + +hrFSRFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + RFS File System." + ::= { hrFSTypes 19 } + +hrFSDGCFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Data General DGCFS." + ::= { hrFSTypes 20 } + +hrFSBFS OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + SVR4 Boot File System." + ::= { hrFSTypes 21 } + +hrFSFAT32 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Windows FAT32 File System." + ::= { hrFSTypes 22 } + +hrFSLinuxExt2 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The file system type identifier used for the + Linux EXT2 File System." + ::= { hrFSTypes 23 } + +END

Added: trunk/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IANA-ADDRESS-FAMILY-NUMBERS-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,121 @@ + IANA-ADDRESS-FAMILY-NUMBERS-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, + mib-2 FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + + ianaAddressFamilyNumbers MODULE-IDENTITY + LAST-UPDATED "200203140000Z" -- March 14, 2002 + ORGANIZATION "IANA" + CONTACT-INFO + "Postal: Internet Assigned Numbers Authority + Internet Corporation for Assigned Names + and Numbers + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292-6601 + USA + + Tel: +1 310-823-9358 + E-Mail: iana@iana.org" + DESCRIPTION + "The MIB module defines the AddressFamilyNumbers + textual convention." + + -- revision history + + REVISION "200203140000Z" -- March 14, 2002 + DESCRIPTION "AddressFamilyNumbers assignment 22 to + fibreChannelWWPN. AddressFamilyNumbers + assignment 23 to fibreChannelWWNN. + AddressFamilyNumers assignment 24 to gwid." + + REVISION "200009080000Z" -- September 8, 2000 + DESCRIPTION "AddressFamilyNumbers assignment 19 to xtpOverIpv4. + AddressFamilyNumbers assignment 20 to xtpOverIpv6. + AddressFamilyNumbers assignment 21 to xtpNativeModeXTP." + + REVISION "200003010000Z" -- March 1, 2000 + DESCRIPTION "AddressFamilyNumbers assignment 17 to distinguishedName. + AddressFamilyNumbers assignment 18 to asNumber." + + REVISION "200002040000Z" -- February 4, 2000 + DESCRIPTION "AddressFamilyNumbers assignment 16 to dns." + + REVISION "9908260000Z" -- August 26, 1999 + DESCRIPTION "Initial version, published as RFC 2677." + ::= { mib-2 72 } + + AddressFamilyNumbers ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The definition of this textual convention with the + addition of newly assigned values is published + periodically by the IANA, in either the Assigned + Numbers RFC, or some derivative of it specific to + Internet Network Management number assignments. + (The latest arrangements can be obtained by + contacting the IANA.) + + The enumerations are described as: + + other(0), -- none of the following + ipV4(1), -- IP Version 4 + ipV6(2), -- IP Version 6 + nsap(3), -- NSAP + hdlc(4), -- (8-bit multidrop) + bbn1822(5), + all802(6), -- (includes all 802 media + -- plus Ethernet 'canonical format') + e163(7), + e164(8), -- (SMDS, Frame Relay, ATM) + f69(9), -- (Telex) + x121(10), -- (X.25, Frame Relay) + ipx(11), -- IPX (Internet Protocol Exchange) + appleTalk(12), -- Apple Talk + decnetIV(13), -- DEC Net Phase IV + banyanVines(14), -- Banyan Vines + e164withNsap(15), + -- (E.164 with NSAP format subaddress) + dns(16), -- (Domain Name System) + distinguishedName(17), -- (Distinguished Name, per X.500) + asNumber(18), -- (16-bit quantity, per the AS number space) + xtpOverIpv4(19), -- XTP over IP version 4 + xtpOverIpv6(20), -- XTP over IP version 6 + xtpNativeModeXTP(21), -- XTP native mode XTP + fibreChannelWWPN(22), -- Fibre Channel World-Wide Port Name + fibreChannelWWNN(23), -- Fibre Channel World-Wide Node Name + gwid(24), -- Gateway Identifier + reserved(65535) + + Requests for new values should be made to IANA via + email (iana@iana.org)." + SYNTAX INTEGER { + other(0), + ipV4(1), + ipV6(2), + nsap(3), + hdlc(4), + bbn1822(5), + all802(6), + e163(7), + e164(8), + f69(9), + x121(10), + ipx(11), + appleTalk(12), + decnetIV(13), + banyanVines(14), + e164withNsap(15), + dns(16), + distinguishedName(17), -- (Distinguished Name, per X.500) + asNumber(18), -- (16-bit quantity, per the AS number space) + xtpOverIpv4(19), + xtpOverIpv6(20), + xtpNativeModeXTP(21), + fibreChannelWWPN(22), + fibreChannelWWNN(23), + gwid(24), + reserved(65535) + } + END

Added: trunk/mibs/IANA-LANGUAGE-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IANA-LANGUAGE-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,123 @@ +IANA-LANGUAGE-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 + FROM SNMPv2-SMI; + +ianaLanguages MODULE-IDENTITY + LAST-UPDATED "200005100000Z" -- May 10, 2000 + ORGANIZATION "IANA" + CONTACT-INFO + "Internet Assigned Numbers Authority (IANA) + + Postal: ICANN + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292 + + Tel: +1 310 823 9358 x20 + E-Mail: iana@iana.org" + DESCRIPTION + "The MIB module registers object identifier values for + well-known programming and scripting languages. Every + language registration MUST describe the format used + when transferring scripts written in this language. + + Any additions or changes to the contents of this MIB + module require Designated Expert Review as defined in + the Guidelines for Writing IANA Considerations Section + document. The Designated Expert will be selected by + the IESG Area Director of the OPS Area. + + Note, this module does not have to register all possible + languages since languages are identified by object + identifier values. It is therefore possible to registered + languages in private OID trees. The references given below are not + normative with regard to the language version. Other + references might be better suited to describe some newer + versions of this language. The references are only + provided as `a pointer into the right direction'." + + -- Revision log, in reverse chronological order + + REVISION "200005100000Z" -- May 10, 2000 + DESCRIPTION "Import mib-2 instead of experimental, so that + this module compiles" + + REVISION "199909090900Z" -- September 9, 1999 + DESCRIPTION "Initial version as published at time of + publication of RFC 2591." + ::= { mib-2 73 } + +ianaLangJavaByteCode OBJECT-IDENTITY + STATUS current + DESCRIPTION + "Java byte code to be processed by a Java virtual machine. + A script written in Java byte code is transferred by using + the Java archive file format (JAR)." + REFERENCE + "The Java Virtual Machine Specification. + ISBN 0-201-63452-X" + ::= { ianaLanguages 1 } + +ianaLangTcl OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Tool Command Language (Tcl). A script written in the + Tcl language is transferred in Tcl source code format." + REFERENCE + "Tcl and the Tk Toolkit. + ISBN 0-201-63337-X" + ::= { ianaLanguages 2 } + +ianaLangPerl OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Perl language. A script written in the Perl language + is transferred in Perl source code format." + REFERENCE + "Programming Perl. + ISBN 1-56592-149-6" + ::= { ianaLanguages 3 } + +ianaLangScheme OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Scheme language. A script written in the Scheme + language is transferred in Scheme source code format." + REFERENCE + "The Revised^4 Report on the Algorithmic Language Scheme. + MIT Press" + ::= { ianaLanguages 4 } + +ianaLangSRSL OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SNMP Script Language defined by SNMP Research. A + script written in the SNMP Script Language is transferred + in the SNMP Script Language source code format." + ::= { ianaLanguages 5 } + +ianaLangPSL OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Patrol Script Language defined by BMC Software. A script + written in the Patrol Script Language is transferred in the + Patrol Script Language source code format." + REFERENCE + "PATROL Script Language Reference Manual, Version 3.0, + November 30, 1995. BMC Software, Inc. 2101 City West Blvd., + Houston, Texas 77042." + ::= { ianaLanguages 6 } + +ianaLangSMSL OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Systems Management Scripting Language. A script written + in the SMSL language is transferred in the SMSL source code + format." + REFERENCE + "ISO/ITU Command Sequencer. + ISO 10164-21 or ITU X.753" + ::= { ianaLanguages 7 } + +END

Added: trunk/mibs/IANA-RTPROTO-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IANA-RTPROTO-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,92 @@ + +IANA-RTPROTO-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, mib-2 FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + +ianaRtProtoMIB MODULE-IDENTITY + LAST-UPDATED "200009260000Z" -- September 26, 2000 + ORGANIZATION "IANA" + CONTACT-INFO + " Internet Assigned Numbers Authority + Internet Corporation for Assigned Names and Numbers + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292-6601 + + Phone: +1 310 823 9358 + EMail: iana@iana.org" + DESCRIPTION + "This MIB module defines the IANAipRouteProtocol and + IANAipMRouteProtocol textual conventions for use in MIBs + which need to identify unicast or multicast routing + mechanisms. + + Any additions or changes to the contents of this MIB module + require either publication of an RFC, or Designated Expert + Review as defined in RFC 2434, Guidelines for Writing an + IANA Considerations Section in RFCs. The Designated Expert + will be selected by the IESG Area Director(s) of the Routing + Area." + + REVISION "200009260000Z" -- September 26, 2000 + DESCRIPTION "Original version, published in coordination + with RFC 2932." + + ::= { mib-2 84 } + +IANAipRouteProtocol ::= TEXTUAL-CONVENTION + STATUS current + + DESCRIPTION + "A mechanism for learning routes. Inclusion of values for + routing protocols is not intended to imply that those + protocols need be supported." + SYNTAX INTEGER { + other (1), -- not specified + local (2), -- local interface + netmgmt (3), -- static route + icmp (4), -- result of ICMP Redirect + + -- the following are all dynamic + -- routing protocols + + egp (5), -- Exterior Gateway Protocol + ggp (6), -- Gateway-Gateway Protocol + hello (7), -- FuzzBall HelloSpeak + rip (8), -- Berkeley RIP or RIP-II + isIs (9), -- Dual IS-IS + esIs (10), -- ISO 9542 + ciscoIgrp (11), -- Cisco IGRP + bbnSpfIgp (12), -- BBN SPF IGP + ospf (13), -- Open Shortest Path First + bgp (14), -- Border Gateway Protocol + idpr (15), -- InterDomain Policy Routing + ciscoEigrp (16), -- Cisco EIGRP + dvmrp (17) -- DVMRP + } + +IANAipMRouteProtocol ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The multicast routing protocol. Inclusion of values for + multicast routing protocols is not intended to imply that + those protocols need be supported." + SYNTAX INTEGER { + other(1), -- none of the following + local(2), -- e.g., manually configured + netmgmt(3), -- set via net.mgmt protocol + dvmrp(4), + mospf(5), + pimSparseDense(6), -- PIMv1, both DM and SM + cbt(7), + pimSparseMode(8), -- PIM-SM + pimDenseMode(9), -- PIM-DM + igmpOnly(10), + bgmp(11), + msdp(12) + } + +END + +

Added: trunk/mibs/IANAifType-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IANAifType-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,487 @@ + IANAifType-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, mib-2 FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + + ianaifType MODULE-IDENTITY + LAST-UPDATED "200510100000Z" -- October 10, 2005 + ORGANIZATION "IANA" + CONTACT-INFO " Internet Assigned Numbers Authority + + Postal: ICANN + 4676 Admiralty Way, Suite 330 + Marina del Rey, CA 90292 + + Tel: +1 310 823 9358 + E-Mail: iana@iana.org" + + DESCRIPTION "This MIB module defines the IANAifType Textual + Convention, and thus the enumerated values of + the ifType object defined in MIB-II's ifTable." + + REVISION "200510100000Z" -- October 10, 2005 + DESCRIPTION "Registration of new IANA ifType 230." + + REVISION "200509090000Z" -- September 09, 2005 + DESCRIPTION "Registration of new IANA ifType 229." + + REVISION "200505270000Z" -- May 27, 2005 + DESCRIPTION "Registration of new IANA ifType 228." + + REVISION "200503030000Z" -- March 3, 2005 + DESCRIPTION "Added the IANAtunnelType TC and deprecated + IANAifType sixToFour (215) per + RFC4087." + + REVISION "200411220000Z" -- November 22, 2004 + DESCRIPTION "Registration of new IANA ifType 227." + + REVISION "200406170000Z" -- June 17, 2004 + DESCRIPTION "Registration of new IANA ifType 226." + + REVISION "200405120000Z" -- May 12, 2004 + DESCRIPTION "Added description for IANAifType 6, and + changed the descriptions for IANAifTypes + 180, 181, and 182." + + REVISION "200405070000Z" -- May 7, 2004 + DESCRIPTION "Registration of new IANAifType 225." + + REVISION "200308250000Z" -- Aug 25, 2003 + DESCRIPTION "Deprecated IANAifTypes 7 and 11. Obsoleted + IANAifTypes 62, 69, and 117. ethernetCsmacd (6) + should be used instead of these values" + + REVISION "200308180000Z" -- Aug 18, 2003 + DESCRIPTION "Registration of new IANAifType + 224." + + REVISION "200308070000Z" -- Aug 7, 2003 + DESCRIPTION "Registration of new IANAifTypes + 222 and 223." + + REVISION "200303180000Z" -- Mar 18, 2003 + DESCRIPTION "Registration of new IANAifType + 221." + + REVISION "200301130000Z" -- Jan 13, 2003 + DESCRIPTION "Registration of new IANAifType + 220." + + REVISION "200210170000Z" -- Oct 17, 2002 + DESCRIPTION "Registration of new IANAifType + 219." + + REVISION "200207160000Z" -- Jul 16, 2002 + DESCRIPTION "Registration of new IANAifTypes + 217 and 218." + + REVISION "200207100000Z" -- Jul 10, 2002 + DESCRIPTION "Registration of new IANAifTypes + 215 and 216." + + REVISION "200206190000Z" -- Jun 19, 2002 + DESCRIPTION "Registration of new IANAifType + 214." + + REVISION "200201040000Z" -- Jan 4, 2002 + DESCRIPTION "Registration of new IANAifTypes + 211, 212 and 213." + + REVISION "200112200000Z" -- Dec 20, 2001 + DESCRIPTION "Registration of new IANAifTypes + 209 and 210." + + REVISION "200111150000Z" -- Nov 15, 2001 + DESCRIPTION "Registration of new IANAifTypes + 207 and 208." + + REVISION "200111060000Z" -- Nov 6, 2001 + DESCRIPTION "Registration of new IANAifType + 206." + + REVISION "200111020000Z" -- Nov 2, 2001 + DESCRIPTION "Registration of new IANAifType + 205." + + REVISION "200110160000Z" -- Oct 16, 2001 + DESCRIPTION "Registration of new IANAifTypes + 199, 200, 201, 202, 203, and 204." + + REVISION "200109190000Z" -- Sept 19, 2001 + DESCRIPTION "Registration of new IANAifType + 198." + + REVISION "200105110000Z" -- May 11, 2001 + DESCRIPTION "Registration of new IANAifType + 197." + + REVISION "200101120000Z" -- Jan 12, 2001 + DESCRIPTION "Registration of new IANAifTypes + 195 and 196." + + REVISION "200012190000Z" -- Dec 19, 2000 + DESCRIPTION "Registration of new IANAifTypes + 193 and 194." + + REVISION "200012070000Z" -- Dec 07, 2000 + DESCRIPTION "Registration of new IANAifTypes + 191 and 192." + + REVISION "200012040000Z" -- Dec 04, 2000 + DESCRIPTION "Registration of new IANAifType + 190." + + REVISION "200010170000Z" -- Oct 17, 2000 + DESCRIPTION "Registration of new IANAifTypes + 188 and 189." + + REVISION "200010020000Z" -- Oct 02, 2000 + DESCRIPTION "Registration of new IANAifType 187." + + REVISION "200009010000Z" -- Sept 01, 2000 + DESCRIPTION "Registration of new IANAifTypes + 184, 185, and 186." + + REVISION "200008240000Z" -- Aug 24, 2000 + DESCRIPTION "Registration of new IANAifType 183." + + REVISION "200008230000Z" -- Aug 23, 2000 + DESCRIPTION "Registration of new IANAifTypes + 174-182." + + REVISION "200008220000Z" -- Aug 22, 2000 + DESCRIPTION "Registration of new IANAifTypes 170, + 171, 172 and 173." + + REVISION "200004250000Z" -- Apr 25, 2000 + DESCRIPTION "Registration of new IANAifTypes 168 and 169." + + REVISION "200003060000Z" -- Mar 6, 2000 + DESCRIPTION "Fixed a missing semi-colon in the IMPORT. + Also cleaned up the REVISION log a bit. + It is not complete, but from now on it will + be maintained and kept up to date with each + change to this MIB module." + + REVISION "199910081430Z" -- Oct 08, 1999 + DESCRIPTION "Include new name assignments up to cnr(85). + This is the first version available via the WWW + at: ftp://ftp.isi.edu/mib/ianaiftype.mib" + + REVISION "199401310000Z" -- Jan 31, 1994 + DESCRIPTION "Initial version of this MIB as published in + RFC 1573." + ::= { mib-2 30 } + + IANAifType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This data type is used as the syntax of the ifType + object in the (updated) definition of MIB-II's + ifTable. + + The definition of this textual convention with the + addition of newly assigned values is published + periodically by the IANA, in either the Assigned + Numbers RFC, or some derivative of it specific to + Internet Network Management number assignments. (The + latest arrangements can be obtained by contacting the + IANA.) + + Requests for new values should be made to IANA via + email (iana@iana.org). + + The relationship between the assignment of ifType + values and of OIDs to particular media-specific MIBs + is solely the purview of IANA and is subject to change + without notice. Quite often, a media-specific MIB's + OID-subtree assignment within MIB-II's 'transmission' + subtree will be the same as its ifType value. + However, in some circumstances this will not be the + case, and implementors must not pre-assume any + specific relationship between ifType values and + transmission subtree OIDs." + SYNTAX INTEGER { + other(1), -- none of the following + regular1822(2), + hdh1822(3), + ddnX25(4), + rfc877x25(5), + ethernetCsmacd(6), -- for all ethernet-like interfaces, + -- regardless of speed, as per RFC3635 + iso88023Csmacd(7), -- Deprecated via RFC-draft-ietf-hubmib-etherif-mib-v3 ethernetCsmacd (6) should be used instead + iso88024TokenBus(8), + iso88025TokenRing(9), + iso88026Man(10), + starLan(11), -- Deprecated via RFC-draft-ietf-hubmib-etherif-mib-v3 ethernetCsmacd (6) should be used instead + proteon10Mbit(12), + proteon80Mbit(13), + hyperchannel(14), + fddi(15), + lapb(16), + sdlc(17), + ds1(18), -- DS1-MIB + e1(19), -- Obsolete see DS1-MIB + basicISDN(20), + primaryISDN(21), + propPointToPointSerial(22), -- proprietary serial + ppp(23), + softwareLoopback(24), + eon(25), -- CLNP over IP + ethernet3Mbit(26), + nsip(27), -- XNS over IP + slip(28), -- generic SLIP + ultra(29), -- ULTRA technologies + ds3(30), -- DS3-MIB + sip(31), -- SMDS, coffee + frameRelay(32), -- DTE only. + rs232(33), + para(34), -- parallel-port + arcnet(35), -- arcnet + arcnetPlus(36), -- arcnet plus + atm(37), -- ATM cells + miox25(38), + sonet(39), -- SONET or SDH + x25ple(40), + iso88022llc(41), + localTalk(42), + smdsDxi(43), + frameRelayService(44), -- FRNETSERV-MIB + v35(45), + hssi(46), + hippi(47), + modem(48), -- Generic modem + aal5(49), -- AAL5 over ATM + sonetPath(50), + sonetVT(51), + smdsIcip(52), -- SMDS InterCarrier Interface + propVirtual(53), -- proprietary virtual/internal + propMultiplexor(54),-- proprietary multiplexing + ieee80212(55), -- 100BaseVG + fibreChannel(56), -- Fibre Channel + hippiInterface(57), -- HIPPI interfaces + frameRelayInterconnect(58), -- Obsolete use either + -- frameRelay(32) or + -- frameRelayService(44). + aflane8023(59), -- ATM Emulated LAN for 802.3 + aflane8025(60), -- ATM Emulated LAN for 802.5 + cctEmul(61), -- ATM Emulated circuit + fastEther(62), -- Obsoleted via RFC-draft-ietf-hubmib-etherif-mib-v3 ethernetCsmacd (6) should be used instead + isdn(63), -- ISDN and X.25 + v11(64), -- CCITT V.11/X.21 + v36(65), -- CCITT V.36 + g703at64k(66), -- CCITT G703 at 64Kbps + g703at2mb(67), -- Obsolete see DS1-MIB + qllc(68), -- SNA QLLC + fastEtherFX(69), -- Obsoleted via RFC-draft-ietf-hubmib-etherif-mib-v3 ethernetCsmacd (6) should be used instead + channel(70), -- channel + ieee80211(71), -- radio spread spectrum + ibm370parChan(72), -- IBM System 360/370 OEMI Channel + escon(73), -- IBM Enterprise Systems Connection + dlsw(74), -- Data Link Switching + isdns(75), -- ISDN S/T interface + isdnu(76), -- ISDN U interface + lapd(77), -- Link Access Protocol D + ipSwitch(78), -- IP Switching Objects + rsrb(79), -- Remote Source Route Bridging + atmLogical(80), -- ATM Logical Port + ds0(81), -- Digital Signal Level 0 + ds0Bundle(82), -- group of ds0s on the same ds1 + bsc(83), -- Bisynchronous Protocol + async(84), -- Asynchronous Protocol + cnr(85), -- Combat Net Radio + iso88025Dtr(86), -- ISO 802.5r DTR + eplrs(87), -- Ext Pos Loc Report Sys + arap(88), -- Appletalk Remote Access Protocol + propCnls(89), -- Proprietary Connectionless Protocol + hostPad(90), -- CCITT-ITU X.29 PAD Protocol + termPad(91), -- CCITT-ITU X.3 PAD Facility + frameRelayMPI(92), -- Multiproto Interconnect over FR + x213(93), -- CCITT-ITU X213 + adsl(94), -- Asymmetric Digital Subscriber Loop + radsl(95), -- Rate-Adapt. Digital Subscriber Loop + sdsl(96), -- Symmetric Digital Subscriber Loop + vdsl(97), -- Very H-Speed Digital Subscrib. Loop + iso88025CRFPInt(98), -- ISO 802.5 CRFP + myrinet(99), -- Myricom Myrinet + voiceEM(100), -- voice recEive and transMit + voiceFXO(101), -- voice Foreign Exchange Office + voiceFXS(102), -- voice Foreign Exchange Station + voiceEncap(103), -- voice encapsulation + voiceOverIp(104), -- voice over IP encapsulation + atmDxi(105), -- ATM DXI + atmFuni(106), -- ATM FUNI + atmIma (107), -- ATM IMA + pppMultilinkBundle(108), -- PPP Multilink Bundle + ipOverCdlc (109), -- IBM ipOverCdlc + ipOverClaw (110), -- IBM Common Link Access to Workstn + stackToStack (111), -- IBM stackToStack + virtualIpAddress (112), -- IBM VIPA + mpc (113), -- IBM multi-protocol channel support + ipOverAtm (114), -- IBM ipOverAtm + iso88025Fiber (115), -- ISO 802.5j Fiber Token Ring + tdlc (116), -- IBM twinaxial data link control + gigabitEthernet (117), -- Obsoleted via RFC-draft-ietf-hubmib-etherif-mib-v3 ethernetCsmacd (6) should be used instead + hdlc (118), -- HDLC + lapf (119), -- LAP F + v37 (120), -- V.37 + x25mlp (121), -- Multi-Link Protocol + x25huntGroup (122), -- X25 Hunt Group + trasnpHdlc (123), -- Transp HDLC + interleave (124), -- Interleave channel + fast (125), -- Fast channel + ip (126), -- IP (for APPN HPR in IP networks) + docsCableMaclayer (127), -- CATV Mac Layer + docsCableDownstream (128), -- CATV Downstream interface + docsCableUpstream (129), -- CATV Upstream interface + a12MppSwitch (130), -- Avalon Parallel Processor + tunnel (131), -- Encapsulation interface + coffee (132), -- coffee pot + ces (133), -- Circuit Emulation Service + atmSubInterface (134), -- ATM Sub Interface + l2vlan (135), -- Layer 2 Virtual LAN using 802.1Q + l3ipvlan (136), -- Layer 3 Virtual LAN using IP + l3ipxvlan (137), -- Layer 3 Virtual LAN using IPX + digitalPowerline (138), -- IP over Power Lines + mediaMailOverIp (139), -- Multimedia Mail over IP + dtm (140), -- Dynamic syncronous Transfer Mode + dcn (141), -- Data Communications Network + ipForward (142), -- IP Forwarding Interface + msdsl (143), -- Multi-rate Symmetric DSL + ieee1394 (144), -- IEEE1394 High Performance Serial Bus + if-gsn (145), -- HIPPI-6400 + dvbRccMacLayer (146), -- DVB-RCC MAC Layer + dvbRccDownstream (147), -- DVB-RCC Downstream Channel + dvbRccUpstream (148), -- DVB-RCC Upstream Channel + atmVirtual (149), -- ATM Virtual Interface + mplsTunnel (150), -- MPLS Tunnel Virtual Interface + srp (151), -- Spatial Reuse Protocol + voiceOverAtm (152), -- Voice Over ATM + voiceOverFrameRelay (153), -- Voice Over Frame Relay + idsl (154), -- Digital Subscriber Loop over ISDN + compositeLink (155), -- Avici Composite Link Interface + ss7SigLink (156), -- SS7 Signaling Link + propWirelessP2P (157), -- Prop. P2P wireless interface + frForward (158), -- Frame Forward Interface + rfc1483 (159), -- Multiprotocol over ATM AAL5 + usb (160), -- USB Interface + ieee8023adLag (161), -- IEEE 802.3ad Link Aggregate + bgppolicyaccounting (162), -- BGP Policy Accounting + frf16MfrBundle (163), -- FRF .16 Multilink Frame Relay + h323Gatekeeper (164), -- H323 Gatekeeper + h323Proxy (165), -- H323 Voice and Video Proxy + mpls (166), -- MPLS + mfSigLink (167), -- Multi-frequency signaling link + hdsl2 (168), -- High Bit-Rate DSL - 2nd generation + shdsl (169), -- Multirate HDSL2 + ds1FDL (170), -- Facility Data Link 4Kbps on a DS1 + pos (171), -- Packet over SONET/SDH Interface + dvbAsiIn (172), -- DVB-ASI Input + dvbAsiOut (173), -- DVB-ASI Output + plc (174), -- Power Line Communtications + nfas (175), -- Non Facility Associated Signaling + tr008 (176), -- TR008 + gr303RDT (177), -- Remote Digital Terminal + gr303IDT (178), -- Integrated Digital Terminal + isup (179), -- ISUP + propDocsWirelessMaclayer (180), -- Cisco proprietary Maclayer + propDocsWirelessDownstream (181), -- Cisco proprietary Downstream + propDocsWirelessUpstream (182), -- Cisco proprietary Upstream + hiperlan2 (183), -- HIPERLAN Type 2 Radio Interface + propBWAp2Mp (184), -- PropBroadbandWirelessAccesspt2multipt + sonetOverheadChannel (185), -- SONET Overhead Channel + digitalWrapperOverheadChannel (186), -- Digital Wrapper + aal2 (187), -- ATM adaptation layer 2 + radioMAC (188), -- MAC layer over radio links + atmRadio (189), -- ATM over radio links + imt (190), -- Inter Machine Trunks + mvl (191), -- Multiple Virtual Lines DSL + reachDSL (192), -- Long Reach DSL + frDlciEndPt (193), -- Frame Relay DLCI End Point + atmVciEndPt (194), -- ATM VCI End Point + opticalChannel (195), -- Optical Channel + opticalTransport (196), -- Optical Transport + propAtm (197), -- Proprietary ATM + voiceOverCable (198), -- Voice Over Cable Interface + infiniband (199), -- Infiniband + teLink (200), -- TE Link + q2931 (201), -- Q.2931 + virtualTg (202), -- Virtual Trunk Group + sipTg (203), -- SIP Trunk Group + sipSig (204), -- SIP Signaling + docsCableUpstreamChannel (205), -- CATV Upstream Channel + econet (206), -- Acorn Econet + pon155 (207), -- FSAN 155Mb Symetrical PON interface + pon622 (208), -- FSAN622Mb Symetrical PON interface + bridge (209), -- Transparent bridge interface + linegroup (210), -- Interface common to multiple lines + voiceEMFGD (211), -- voice E&M Feature Group D + voiceFGDEANA (212), -- voice FGD Exchange Access North American + voiceDID (213), -- voice Direct Inward Dialing + mpegTransport (214), -- MPEG transport interface + sixToFour (215), -- 6to4 interface (DEPRECATED) + gtp (216), -- GTP (GPRS Tunneling Protocol) + pdnEtherLoop1 (217), -- Paradyne EtherLoop 1 + pdnEtherLoop2 (218), -- Paradyne EtherLoop 2 + opticalChannelGroup (219), -- Optical Channel Group + homepna (220), -- HomePNA ITU-T G.989 + gfp (221), -- Generic Framing Procedure (GFP) + ciscoISLvlan (222), -- Layer 2 Virtual LAN using Cisco ISL + actelisMetaLOOP (223), -- Acteleis proprietary MetaLOOP High Speed Link + fcipLink (224), -- FCIP Link + rpr (225), -- Resilient Packet Ring Interface Type + qam (226), -- RF Qam Interface + lmp (227), -- Link Management Protocol + cblVectaStar (228), -- Cambridge Broadband Limited VectaStar + docsCableMCmtsDownstream (229), -- CATV Modular CMTS Downstream Interface + adsl2 (230) -- Asymmetric Digital Subscriber Loop Version 2 + } + +IANAtunnelType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The encapsulation method used by a tunnel. The value + direct indicates that a packet is encapsulated + directly within a normal IP header, with no + intermediate header, and unicast to the remote tunnel + endpoint (e.g., an RFC 2003 IP-in-IP tunnel, or an RFC + 1933 IPv6-in-IPv4 tunnel). The value minimal indicates + that a Minimal Forwarding Header (RFC 2004) is + inserted between the outer header and the payload + packet. The value UDP indicates that the payload + packet is encapsulated within a normal UDP packet + (e.g., RFC 1234). + + The values sixToFour, sixOverFour, and isatap + indicates that an IPv6 packet is encapsulated directly + within an IPv4 header, with no intermediate header, + and unicast to the destination determined by the 6to4, + 6over4, or ISATAP protocol. + + The remaining protocol-specific values indicate that a + header of the protocol of that name is inserted + between the outer header and the payload header. + + The assignment policy for IANAtunnelType values is + identical to the policy for assigning IANAifType + values." + SYNTAX INTEGER { + other(1), -- none of the following + direct(2), -- no intermediate header + gre(3), -- GRE encapsulation + minimal(4), -- Minimal encapsulation + l2tp(5), -- L2TP encapsulation + pptp(6), -- PPTP encapsulation + l2f(7), -- L2F encapsulation + udp(8), -- UDP encapsulation + atmp(9), -- ATMP encapsulation + msdp(10), -- MSDP encapsulation + sixToFour(11), -- 6to4 encapsulation + sixOverFour(12), -- 6over4 encapsulation + isatap(13), -- ISATAP encapsulation + teredo(14) -- Teredo encapsulation + } + + END

Added: trunk/mibs/IF-INVERTED-STACK-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IF-INVERTED-STACK-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,149 @@ +IF-INVERTED-STACK-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, mib-2 FROM SNMPv2-SMI + RowStatus FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + ifStackGroup2, + ifStackHigherLayer, ifStackLowerLayer FROM IF-MIB; + +ifInvertedStackMIB MODULE-IDENTITY + LAST-UPDATED "200006140000Z" + ORGANIZATION "IETF Interfaces MIB Working Group" + CONTACT-INFO + " Keith McCloghrie + Cisco Systems, Inc. + 170 West Tasman Drive + San Jose, CA 95134-1706 + US + + 408-526-5260 + kzm@cisco.com" + DESCRIPTION + "The MIB module which provides the Inverted Stack Table for + interface sub-layers." + REVISION "200006140000Z" + DESCRIPTION + "Initial revision, published as RFC 2864" + ::= { mib-2 77 } + +ifInvMIBObjects OBJECT IDENTIFIER ::= { ifInvertedStackMIB 1 } + +-- +-- The Inverted Interface Stack Group +-- + +ifInvStackTable OBJECT-TYPE + SYNTAX SEQUENCE OF IfInvStackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information on the relationships between + + the multiple sub-layers of network interfaces. In + particular, it contains information on which sub-layers run + 'underneath' which other sub-layers, where each sub-layer + corresponds to a conceptual row in the ifTable. For + example, when the sub-layer with ifIndex value x runs + underneath the sub-layer with ifIndex value y, then this + table contains: + + ifInvStackStatus.x.y=active + + For each ifIndex value, z, which identifies an active + interface, there are always at least two instantiated rows + in this table associated with z. For one of these rows, z + is the value of ifStackHigherLayer; for the other, z is the + value of ifStackLowerLayer. (If z is not involved in + multiplexing, then these are the only two rows associated + with z.) + + For example, two rows exist even for an interface which has + no others stacked on top or below it: + + ifInvStackStatus.z.0=active + ifInvStackStatus.0.z=active + + This table contains exactly the same number of rows as the + ifStackTable, but the rows appear in a different order." + REFERENCE + "ifStackTable of RFC 2863" + ::= { ifInvMIBObjects 1 } + +ifInvStackEntry OBJECT-TYPE + SYNTAX IfInvStackEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information on a particular relationship between two sub- + layers, specifying that one sub-layer runs underneath the + other sub-layer. Each sub-layer corresponds to a conceptual + row in the ifTable." + INDEX { ifStackLowerLayer, ifStackHigherLayer } + ::= { ifInvStackTable 1 } + +IfInvStackEntry ::= + SEQUENCE { + ifInvStackStatus RowStatus + } + +ifInvStackStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The status of the relationship between two sub-layers. + + An instance of this object exists for each instance of the + ifStackStatus object, and vice versa. For example, if the + variable ifStackStatus.H.L exists, then the variable + ifInvStackStatus.L.H must also exist, and vice versa. In + addition, the two variables always have the same value. + + However, unlike ifStackStatus, the ifInvStackStatus object + is NOT write-able. A network management application wishing + to change a relationship between sub-layers H and L cannot + do so by modifying the value of ifInvStackStatus.L.H, but + must instead modify the value of ifStackStatus.H.L. After + the ifStackTable is modified, the change will be reflected + in this table." + ::= { ifInvStackEntry 1 } + +-- conformance information + +ifInvConformance OBJECT IDENTIFIER ::= { ifInvMIBObjects 2 } + +ifInvGroups OBJECT IDENTIFIER ::= { ifInvConformance 1 } +ifInvCompliances OBJECT IDENTIFIER ::= { ifInvConformance 2 } + +-- compliance statements + +ifInvCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which provide + inverted information on the layering of network interfaces." + + MODULE -- this module + MANDATORY-GROUPS { ifInvStackGroup } + + OBJECT ifInvStackStatus + SYNTAX INTEGER { active(1) } + DESCRIPTION + "Support is only required for 'active'." + + MODULE IF-MIB + MANDATORY-GROUPS { ifStackGroup2 } + ::= { ifInvCompliances 1 } + +-- units of conformance + +ifInvStackGroup OBJECT-GROUP + OBJECTS { ifInvStackStatus } + STATUS current + DESCRIPTION + "A collection of objects providing inverted information on + the layering of MIB-II interfaces." + ::= { ifInvGroups 1 } + +END

Added: trunk/mibs/INET-ADDRESS-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/INET-ADDRESS-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,402 @@ +INET-ADDRESS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, mib-2, Unsigned32 FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + +inetAddressMIB MODULE-IDENTITY + LAST-UPDATED "200502040000Z" + ORGANIZATION + "IETF Operations and Management Area" + CONTACT-INFO + "Juergen Schoenwaelder (Editor) + International University Bremen + P.O. Box 750 561 + 28725 Bremen, Germany + + Phone: +49 421 200-3587 + EMail: j.schoenwaelder@iu-bremen.de + + Send comments to ietfmibs@ops.ietf.org." + DESCRIPTION + "This MIB module defines textual conventions for + representing Internet addresses. An Internet + address can be an IPv4 address, an IPv6 address, + or a DNS domain name. This module also defines + textual conventions for Internet port numbers, + autonomous system numbers, and the length of an + Internet address prefix. + + Copyright (C) The Internet Society (2005). This version + of this MIB module is part of RFC 4001, see the RFC + itself for full legal notices." + REVISION "200502040000Z" + DESCRIPTION + "Third version, published as RFC 4001. This revision + introduces the InetZoneIndex, InetScopeType, and + InetVersion textual conventions." + REVISION "200205090000Z" + DESCRIPTION + "Second version, published as RFC 3291. This + revision contains several clarifications and + introduces several new textual conventions: + InetAddressPrefixLength, InetPortNumber, + InetAutonomousSystemNumber, InetAddressIPv4z, + and InetAddressIPv6z." + REVISION "200006080000Z" + DESCRIPTION + "Initial version, published as RFC 2851." + ::= { mib-2 76 } + +InetAddressType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents a type of Internet address. + + unknown(0) An unknown address type. This value MUST + be used if the value of the corresponding + InetAddress object is a zero-length string. + It may also be used to indicate an IP address + that is not in one of the formats defined + below. + + ipv4(1) An IPv4 address as defined by the + InetAddressIPv4 textual convention. + + ipv6(2) An IPv6 address as defined by the + InetAddressIPv6 textual convention. + + ipv4z(3) A non-global IPv4 address including a zone + index as defined by the InetAddressIPv4z + textual convention. + + ipv6z(4) A non-global IPv6 address including a zone + index as defined by the InetAddressIPv6z + textual convention. + + dns(16) A DNS domain name as defined by the + InetAddressDNS textual convention. + + Each definition of a concrete InetAddressType value must be + accompanied by a definition of a textual convention for use + with that InetAddressType. + + To support future extensions, the InetAddressType textual + convention SHOULD NOT be sub-typed in object type definitions. + It MAY be sub-typed in compliance statements in order to + require only a subset of these address types for a compliant + implementation. + + Implementations must ensure that InetAddressType objects + and any dependent objects (e.g., InetAddress objects) are + consistent. An inconsistentValue error must be generated + if an attempt to change an InetAddressType object would, + for example, lead to an undefined InetAddress value. In + + particular, InetAddressType/InetAddress pairs must be + changed together if the address type changes (e.g., from + ipv6(2) to ipv4(1))." + SYNTAX INTEGER { + unknown(0), + ipv4(1), + ipv6(2), + ipv4z(3), + ipv6z(4), + dns(16) + } + +InetAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Denotes a generic Internet address. + + An InetAddress value is always interpreted within the context + of an InetAddressType value. Every usage of the InetAddress + textual convention is required to specify the InetAddressType + object that provides the context. It is suggested that the + InetAddressType object be logically registered before the + object(s) that use the InetAddress textual convention, if + they appear in the same logical row. + + The value of an InetAddress object must always be + consistent with the value of the associated InetAddressType + object. Attempts to set an InetAddress object to a value + inconsistent with the associated InetAddressType + must fail with an inconsistentValue error. + + When this textual convention is used as the syntax of an + index object, there may be issues with the limit of 128 + sub-identifiers specified in SMIv2, STD 58. In this case, + the object definition MUST include a 'SIZE' clause to + limit the number of potential instance sub-identifiers; + otherwise the applicable constraints MUST be stated in + the appropriate conceptual row DESCRIPTION clauses, or + in the surrounding documentation if there is no single + DESCRIPTION clause that is appropriate." + SYNTAX OCTET STRING (SIZE (0..255)) + +InetAddressIPv4 ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d" + STATUS current + DESCRIPTION + "Represents an IPv4 network address: + + Octets Contents Encoding + 1-4 IPv4 address network-byte order + + The corresponding InetAddressType value is ipv4(1). + + This textual convention SHOULD NOT be used directly in object + definitions, as it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or in + conjunction with InetAddressType, as a pair." + SYNTAX OCTET STRING (SIZE (4)) + +InetAddressIPv6 ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x" + STATUS current + DESCRIPTION + "Represents an IPv6 network address: + + Octets Contents Encoding + 1-16 IPv6 address network-byte order + + The corresponding InetAddressType value is ipv6(2). + + This textual convention SHOULD NOT be used directly in object + definitions, as it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or in + conjunction with InetAddressType, as a pair." + SYNTAX OCTET STRING (SIZE (16)) + +InetAddressIPv4z ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d%4d" + STATUS current + DESCRIPTION + "Represents a non-global IPv4 network address, together + with its zone index: + + Octets Contents Encoding + 1-4 IPv4 address network-byte order + 5-8 zone index network-byte order + + The corresponding InetAddressType value is ipv4z(3). + + The zone index (bytes 5-8) is used to disambiguate identical + address values on nodes that have interfaces attached to + different zones of the same scope. The zone index may contain + the special value 0, which refers to the default zone for each + scope. + + This textual convention SHOULD NOT be used directly in object + + definitions, as it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or in + conjunction with InetAddressType, as a pair." + SYNTAX OCTET STRING (SIZE (8)) + +InetAddressIPv6z ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x%4d" + STATUS current + DESCRIPTION + "Represents a non-global IPv6 network address, together + with its zone index: + + Octets Contents Encoding + 1-16 IPv6 address network-byte order + 17-20 zone index network-byte order + + The corresponding InetAddressType value is ipv6z(4). + + The zone index (bytes 17-20) is used to disambiguate + identical address values on nodes that have interfaces + attached to different zones of the same scope. The zone index + may contain the special value 0, which refers to the default + zone for each scope. + + This textual convention SHOULD NOT be used directly in object + definitions, as it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or in + conjunction with InetAddressType, as a pair." + SYNTAX OCTET STRING (SIZE (20)) + +InetAddressDNS ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255a" + STATUS current + DESCRIPTION + "Represents a DNS domain name. The name SHOULD be fully + qualified whenever possible. + + The corresponding InetAddressType is dns(16). + + The DESCRIPTION clause of InetAddress objects that may have + InetAddressDNS values MUST fully describe how (and when) + these names are to be resolved to IP addresses. + + The resolution of an InetAddressDNS value may require to + query multiple DNS records (e.g., A for IPv4 and AAAA for + IPv6). The order of the resolution process and which DNS + record takes precedence depends on the configuration of the + resolver. + + This textual convention SHOULD NOT be used directly in object + definitions, as it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or in + conjunction with InetAddressType, as a pair." + SYNTAX OCTET STRING (SIZE (1..255)) + +InetAddressPrefixLength ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Denotes the length of a generic Internet network address + prefix. A value of n corresponds to an IP address mask + that has n contiguous 1-bits from the most significant + bit (MSB), with all other bits set to 0. + + An InetAddressPrefixLength value is always interpreted within + the context of an InetAddressType value. Every usage of the + InetAddressPrefixLength textual convention is required to + specify the InetAddressType object that provides the + context. It is suggested that the InetAddressType object be + logically registered before the object(s) that use the + InetAddressPrefixLength textual convention, if they appear + in the same logical row. + + InetAddressPrefixLength values larger than + the maximum length of an IP address for a specific + InetAddressType are treated as the maximum significant + value applicable for the InetAddressType. The maximum + significant value is 32 for the InetAddressType + 'ipv4(1)' and 'ipv4z(3)' and 128 for the InetAddressType + 'ipv6(2)' and 'ipv6z(4)'. The maximum significant value + for the InetAddressType 'dns(16)' is 0. + + The value zero is object-specific and must be defined as + part of the description of any object that uses this + syntax. Examples of the usage of zero might include + situations where the Internet network address prefix + is unknown or does not apply. + + The upper bound of the prefix length has been chosen to + be consistent with the maximum size of an InetAddress." + SYNTAX Unsigned32 (0..2040) + +InetPortNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Represents a 16 bit port number of an Internet transport + + layer protocol. Port numbers are assigned by IANA. A + current list of all assignments is available from + http://www.iana.org/. + + The value zero is object-specific and must be defined as + part of the description of any object that uses this + syntax. Examples of the usage of zero might include + situations where a port number is unknown, or when the + value zero is used as a wildcard in a filter." + REFERENCE "STD 6 (RFC 768), STD 7 (RFC 793) and RFC 2960" + SYNTAX Unsigned32 (0..65535) + +InetAutonomousSystemNumber ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "Represents an autonomous system number that identifies an + Autonomous System (AS). An AS is a set of routers under a + single technical administration, using an interior gateway + protocol and common metrics to route packets within the AS, + and using an exterior gateway protocol to route packets to + other ASes'. IANA maintains the AS number space and has + delegated large parts to the regional registries. + + Autonomous system numbers are currently limited to 16 bits + (0..65535). There is, however, work in progress to enlarge the + autonomous system number space to 32 bits. Therefore, this + textual convention uses an Unsigned32 value without a + range restriction in order to support a larger autonomous + system number space." + REFERENCE "RFC 1771, RFC 1930" + SYNTAX Unsigned32 + +InetScopeType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents a scope type. This textual convention can be used + in cases where a MIB has to represent different scope types + and there is no context information, such as an InetAddress + object, that implicitly defines the scope type. + + Note that not all possible values have been assigned yet, but + they may be assigned in future revisions of this specification. + Applications should therefore be able to deal with values + not yet assigned." + REFERENCE "RFC 3513" + SYNTAX INTEGER { + -- reserved(0), + interfaceLocal(1), + linkLocal(2), + subnetLocal(3), + adminLocal(4), + siteLocal(5), -- site-local unicast addresses + -- have been deprecated by RFC 3879 + -- unassigned(6), + -- unassigned(7), + organizationLocal(8), + -- unassigned(9), + -- unassigned(10), + -- unassigned(11), + -- unassigned(12), + -- unassigned(13), + global(14) + -- reserved(15) + } + +InetZoneIndex ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "A zone index identifies an instance of a zone of a + specific scope. + + The zone index MUST disambiguate identical address + values. For link-local addresses, the zone index will + typically be the interface index (ifIndex as defined in the + IF-MIB) of the interface on which the address is configured. + + The zone index may contain the special value 0, which refers + to the default zone. The default zone may be used in cases + where the valid zone index is not known (e.g., when a + management application has to write a link-local IPv6 + address without knowing the interface index value). The + default zone SHOULD NOT be used as an easy way out in + cases where the zone index for a non-global IPv6 address + is known." + REFERENCE "RFC4007" + SYNTAX Unsigned32 + +InetVersion ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value representing a version of the IP protocol. + + unknown(0) An unknown or unspecified version of the IP + protocol. + + ipv4(1) The IPv4 protocol as defined in RFC 791 (STD 5). + + ipv6(2) The IPv6 protocol as defined in RFC 2460. + + Note that this textual convention SHOULD NOT be used to + distinguish different address types associated with IP + protocols. The InetAddressType has been designed for this + purpose." + REFERENCE "RFC 791, RFC 2460" + SYNTAX INTEGER { + unknown(0), + ipv4(1), + ipv6(2) + } +END

Added: trunk/mibs/IP-FORWARD-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IP-FORWARD-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,1357 @@ +IP-FORWARD-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + IpAddress, Integer32, Gauge32, + Counter32 FROM SNMPv2-SMI + RowStatus FROM SNMPv2-TC + + + + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + InterfaceIndexOrZero FROM IF-MIB + ip FROM IP-MIB + IANAipRouteProtocol FROM IANA-RTPROTO-MIB + InetAddress, InetAddressType, + InetAddressPrefixLength, + InetAutonomousSystemNumber FROM INET-ADDRESS-MIB; + +ipForward MODULE-IDENTITY + LAST-UPDATED "200602010000Z" + ORGANIZATION + "IETF IPv6 Working Group + http://www.ietf.org/html.charters/ipv6-charter.html" + CONTACT-INFO + "Editor: + Brian Haberman + Johns Hopkins University - Applied Physics Laboratory + Mailstop 17-S442 + 11100 Johns Hopkins Road + Laurel MD, 20723-6099 USA + + Phone: +1-443-778-1319 + Email: brian@innovationslab.net + + Send comments to ipv6@ietf.org" + DESCRIPTION + "The MIB module for the management of CIDR multipath IP + Routes. + + Copyright (C) The Internet Society (2006). This version + of this MIB module is a part of RFC 4292; see the RFC + itself for full legal notices." + + REVISION "200602010000Z" + DESCRIPTION + "IPv4/v6 version-independent revision. Minimal changes + were made to the original RFC 2096 MIB to allow easy + upgrade of existing IPv4 implementations to the + version-independent MIB. These changes include: + + Adding inetCidrRouteDiscards as a replacement for the + deprecated ipRoutingDiscards and ipv6DiscardedRoutes + objects. + + Adding a new conformance statement to support the + implementation of the IP Forwarding MIB in a + read-only mode. + + + + + The inetCidrRouteTable replaces the IPv4-specific + ipCidrRouteTable, its related objects, and related + conformance statements. + + Published as RFC 4292." + + REVISION "199609190000Z" + DESCRIPTION + "Revised to support CIDR routes. + Published as RFC 2096." + + REVISION "199207022156Z" + DESCRIPTION + "Initial version, published as RFC 1354." + ::= { ip 24 } + +inetCidrRouteNumber OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current inetCidrRouteTable entries that + are not invalid." +::= { ipForward 6 } + +inetCidrRouteDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of valid route entries discarded from the + inetCidrRouteTable. Discarded route entries do not + appear in the inetCidrRouteTable. One possible reason + for discarding an entry would be to free-up buffer space + for other route table entries." + ::= { ipForward 8 } + +-- Inet CIDR Route Table + +-- The Inet CIDR Route Table deprecates and replaces the +-- ipCidrRoute Table currently in the IP Forwarding Table MIB. +-- It adds IP protocol independence. + +inetCidrRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF InetCidrRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + + + + "This entity's IP Routing table." + REFERENCE + "RFC 1213 Section 6.6, The IP Group" + ::= { ipForward 7 } + +inetCidrRouteEntry OBJECT-TYPE + SYNTAX InetCidrRouteEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular route to a particular destination, under a + particular policy (as reflected in the + inetCidrRoutePolicy object). + + Dynamically created rows will survive an agent reboot. + + Implementers need to be aware that if the total number + of elements (octets or sub-identifiers) in + inetCidrRouteDest, inetCidrRoutePolicy, and + inetCidrRouteNextHop exceeds 111, then OIDs of column + instances in this table will have more than 128 sub- + identifiers and cannot be accessed using SNMPv1, + SNMPv2c, or SNMPv3." + INDEX { + inetCidrRouteDestType, + inetCidrRouteDest, + inetCidrRoutePfxLen, + inetCidrRoutePolicy, + inetCidrRouteNextHopType, + inetCidrRouteNextHop + } + ::= { inetCidrRouteTable 1 } + +InetCidrRouteEntry ::= SEQUENCE { + inetCidrRouteDestType InetAddressType, + inetCidrRouteDest InetAddress, + inetCidrRoutePfxLen InetAddressPrefixLength, + inetCidrRoutePolicy OBJECT IDENTIFIER, + inetCidrRouteNextHopType InetAddressType, + inetCidrRouteNextHop InetAddress, + inetCidrRouteIfIndex InterfaceIndexOrZero, + inetCidrRouteType INTEGER, + inetCidrRouteProto IANAipRouteProtocol, + inetCidrRouteAge Gauge32, + inetCidrRouteNextHopAS InetAutonomousSystemNumber, + inetCidrRouteMetric1 Integer32, + inetCidrRouteMetric2 Integer32, + inetCidrRouteMetric3 Integer32, + + + + inetCidrRouteMetric4 Integer32, + inetCidrRouteMetric5 Integer32, + inetCidrRouteStatus RowStatus + } + +inetCidrRouteDestType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the inetCidrRouteDest address, as defined + in the InetAddress MIB. + + Only those address types that may appear in an actual + routing table are allowed as values of this object." + REFERENCE "RFC 4001" + ::= { inetCidrRouteEntry 1 } + +inetCidrRouteDest OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The destination IP address of this route. + + The type of this address is determined by the value of + the inetCidrRouteDestType object. + + The values for the index objects inetCidrRouteDest and + inetCidrRoutePfxLen must be consistent. When the value + of inetCidrRouteDest (excluding the zone index, if one + is present) is x, then the bitwise logical-AND + of x with the value of the mask formed from the + corresponding index object inetCidrRoutePfxLen MUST be + equal to x. If not, then the index pair is not + consistent and an inconsistentName error must be + returned on SET or CREATE requests." + + ::= { inetCidrRouteEntry 2 } + +inetCidrRoutePfxLen OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Indicates the number of leading one bits that form the + mask to be logical-ANDed with the destination address + before being compared to the value in the + + + + inetCidrRouteDest field. + + The values for the index objects inetCidrRouteDest and + inetCidrRoutePfxLen must be consistent. When the value + of inetCidrRouteDest (excluding the zone index, if one + is present) is x, then the bitwise logical-AND + of x with the value of the mask formed from the + corresponding index object inetCidrRoutePfxLen MUST be + equal to x. If not, then the index pair is not + consistent and an inconsistentName error must be + returned on SET or CREATE requests." + + ::= { inetCidrRouteEntry 3 } + +inetCidrRoutePolicy OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object is an opaque object without any defined + semantics. Its purpose is to serve as an additional + index that may delineate between multiple entries to + the same destination. The value { 0 0 } shall be used + as the default value for this object." + ::= { inetCidrRouteEntry 4 } + +inetCidrRouteNextHopType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of the inetCidrRouteNextHop address, as + defined in the InetAddress MIB. + + Value should be set to unknown(0) for non-remote + routes. + + Only those address types that may appear in an actual + routing table are allowed as values of this object." + REFERENCE "RFC 4001" + ::= { inetCidrRouteEntry 5 } + +inetCidrRouteNextHop OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "On remote routes, the address of the next system en + + + + route. For non-remote routes, a zero length string. + + The type of this address is determined by the value of + the inetCidrRouteNextHopType object." + ::= { inetCidrRouteEntry 6 } + +inetCidrRouteIfIndex OBJECT-TYPE + SYNTAX InterfaceIndexOrZero + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached. A value of 0 is valid and represents the + scenario where no interface is specified." + ::= { inetCidrRouteEntry 7 } + +inetCidrRouteType OBJECT-TYPE + SYNTAX INTEGER { + other (1), -- not specified by this MIB + reject (2), -- route that discards traffic and + -- returns ICMP notification + local (3), -- local interface + remote (4), -- remote destination + blackhole(5) -- route that discards traffic + -- silently + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of route. Note that local(3) refers to a + route for which the next hop is the final destination; + remote(4) refers to a route for which the next hop is + not the final destination. + + Routes that do not result in traffic forwarding or + rejection should not be displayed, even if the + implementation keeps them stored internally. + + reject(2) refers to a route that, if matched, discards + the message as unreachable and returns a notification + (e.g., ICMP error) to the message sender. This is used + in some protocols as a means of correctly aggregating + routes. + + blackhole(5) refers to a route that, if matched, + discards the message silently." + ::= { inetCidrRouteEntry 8 } + + + + +inetCidrRouteProto OBJECT-TYPE + SYNTAX IANAipRouteProtocol + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The routing mechanism via which this route was learned. + Inclusion of values for gateway routing protocols is + not intended to imply that hosts should support those + protocols." + ::= { inetCidrRouteEntry 9 } + +inetCidrRouteAge OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of seconds since this route was last updated + or otherwise determined to be correct. Note that no + semantics of 'too old' can be implied, except through + knowledge of the routing protocol by which the route + was learned." + ::= { inetCidrRouteEntry 10 } + +inetCidrRouteNextHopAS OBJECT-TYPE + SYNTAX InetAutonomousSystemNumber + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Autonomous System Number of the Next Hop. The + semantics of this object are determined by the routing- + protocol specified in the route's inetCidrRouteProto + value. When this object is unknown or not relevant, its + value should be set to zero." + DEFVAL { 0 } + ::= { inetCidrRouteEntry 11 } + +inetCidrRouteMetric1 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The primary routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's inetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + + + + ::= { inetCidrRouteEntry 12 } + +inetCidrRouteMetric2 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's inetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { inetCidrRouteEntry 13 } + +inetCidrRouteMetric3 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's inetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { inetCidrRouteEntry 14 } + +inetCidrRouteMetric4 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's inetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { inetCidrRouteEntry 15 } + +inetCidrRouteMetric5 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + + + + protocol specified in the route's inetCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { inetCidrRouteEntry 16 } + +inetCidrRouteStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The row status variable, used according to row + installation and removal conventions. + + A row entry cannot be modified when the status is + marked as active(1)." + ::= { inetCidrRouteEntry 17 } + +-- Conformance information + +ipForwardConformance + OBJECT IDENTIFIER ::= { ipForward 5 } + +ipForwardGroups + OBJECT IDENTIFIER ::= { ipForwardConformance 1 } + +ipForwardCompliances + OBJECT IDENTIFIER ::= { ipForwardConformance 2 } + +-- Compliance statements + +ipForwardFullCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "When this MIB is implemented for read-create, the + implementation can claim full compliance. + + There are a number of INDEX objects that cannot be + represented in the form of OBJECT clauses in SMIv2, + but for which there are compliance requirements, + expressed in OBJECT clause form in this description: + + -- OBJECT inetCidrRouteDestType + -- SYNTAX InetAddressType (ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global ipv4 and ipv6 addresses. + + + + -- + -- OBJECT inetCidrRouteDest + -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global IPv4 and IPv6 addresses. + -- + -- OBJECT inetCidrRouteNextHopType + -- SYNTAX InetAddressType (unknown(0), ipv4(1), + -- ipv6(2), ipv4z(3) + -- ipv6z(4)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global ipv4 and ipv6 addresses. + -- + -- OBJECT inetCidrRouteNextHop + -- SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for global and + -- non-global IPv4 and IPv6 addresses. + " + + MODULE -- this module + MANDATORY-GROUPS { inetForwardCidrRouteGroup } + + OBJECT inetCidrRouteStatus + SYNTAX RowStatus { active(1), notInService (2) } + WRITE-SYNTAX RowStatus { active(1), notInService (2), + createAndGo(4), destroy(6) } + DESCRIPTION "Support for createAndWait is not required." + + ::= { ipForwardCompliances 3 } + +ipForwardReadOnlyCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "When this MIB is implemented without support for read- + create (i.e., in read-only mode), the implementation can + claim read-only compliance." + MODULE -- this module + MANDATORY-GROUPS { inetForwardCidrRouteGroup } + + OBJECT inetCidrRouteIfIndex + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteType + + + + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteNextHopAS + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteMetric1 + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteMetric2 + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteMetric3 + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteMetric4 + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteMetric5 + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + OBJECT inetCidrRouteStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION + "Write access is not required." + + ::= { ipForwardCompliances 4 } + +-- units of conformance + +inetForwardCidrRouteGroup OBJECT-GROUP + OBJECTS { inetCidrRouteDiscards, + inetCidrRouteIfIndex, inetCidrRouteType, + inetCidrRouteProto, inetCidrRouteAge, + + + + inetCidrRouteNextHopAS, inetCidrRouteMetric1, + inetCidrRouteMetric2, inetCidrRouteMetric3, + inetCidrRouteMetric4, inetCidrRouteMetric5, + inetCidrRouteStatus, inetCidrRouteNumber + } + STATUS current + DESCRIPTION + "The IP version-independent CIDR Route Table." + ::= { ipForwardGroups 4 } + +-- Deprecated Objects + +ipCidrRouteNumber OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of current ipCidrRouteTable entries that are + not invalid. This object is deprecated in favor of + inetCidrRouteNumber and the inetCidrRouteTable." + ::= { ipForward 3 } + +-- IP CIDR Route Table + +-- The IP CIDR Route Table obsoletes and replaces the ipRoute +-- Table current in MIB-I and MIB-II and the IP Forwarding Table. +-- It adds knowledge of the autonomous system of the next hop, +-- multiple next hops, policy routing, and Classless +-- Inter-Domain Routing. + +ipCidrRouteTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpCidrRouteEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "This entity's IP Routing table. This table has been + deprecated in favor of the IP version neutral + inetCidrRouteTable." + REFERENCE + "RFC 1213 Section 6.6, The IP Group" + ::= { ipForward 4 } + +ipCidrRouteEntry OBJECT-TYPE + SYNTAX IpCidrRouteEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A particular route to a particular destination, under a + + + + particular policy." + INDEX { + ipCidrRouteDest, + ipCidrRouteMask, + ipCidrRouteTos, + ipCidrRouteNextHop + } + ::= { ipCidrRouteTable 1 } + +IpCidrRouteEntry ::= SEQUENCE { + ipCidrRouteDest IpAddress, + ipCidrRouteMask IpAddress, + ipCidrRouteTos Integer32, + ipCidrRouteNextHop IpAddress, + ipCidrRouteIfIndex Integer32, + ipCidrRouteType INTEGER, + ipCidrRouteProto INTEGER, + ipCidrRouteAge Integer32, + ipCidrRouteInfo OBJECT IDENTIFIER, + ipCidrRouteNextHopAS Integer32, + ipCidrRouteMetric1 Integer32, + ipCidrRouteMetric2 Integer32, + ipCidrRouteMetric3 Integer32, + ipCidrRouteMetric4 Integer32, + ipCidrRouteMetric5 Integer32, + ipCidrRouteStatus RowStatus + } + +ipCidrRouteDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The destination IP address of this route. + + This object may not take a Multicast (Class D) address + value. + + Any assignment (implicit or otherwise) of an instance + of this object to a value x must be rejected if the + bitwise logical-AND of x with the value of the + corresponding instance of the ipCidrRouteMask object is + not equal to x." + ::= { ipCidrRouteEntry 1 } + +ipCidrRouteMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + + + + STATUS deprecated + DESCRIPTION + "Indicate the mask to be logical-ANDed with the + destination address before being compared to the value + in the ipCidrRouteDest field. For those systems that + do not support arbitrary subnet masks, an agent + constructs the value of the ipCidrRouteMask by + reference to the IP Address Class. + + Any assignment (implicit or otherwise) of an instance + of this object to a value x must be rejected if the + bitwise logical-AND of x with the value of the + corresponding instance of the ipCidrRouteDest object is + not equal to ipCidrRouteDest." + ::= { ipCidrRouteEntry 2 } + +-- The following convention is included for specification +-- of TOS Field contents. At this time, the Host Requirements +-- and the Router Requirements documents disagree on the width +-- of the TOS field. This mapping describes the Router +-- Requirements mapping, and leaves room to widen the TOS field +-- without impact to fielded systems. + +ipCidrRouteTos OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The policy specifier is the IP TOS Field. The encoding + of IP TOS is as specified by the following convention. + Zero indicates the default path if no more specific + policy applies. + + +-----+-----+-----+-----+-----+-----+-----+-----+ + | | | | + | PRECEDENCE | TYPE OF SERVICE | 0 | + | | | | + +-----+-----+-----+-----+-----+-----+-----+-----+ + + IP TOS IP TOS + Field Policy Field Policy + Contents Code Contents Code + 0 0 0 0 ==> 0 0 0 0 1 ==> 2 + 0 0 1 0 ==> 4 0 0 1 1 ==> 6 + 0 1 0 0 ==> 8 0 1 0 1 ==> 10 + 0 1 1 0 ==> 12 0 1 1 1 ==> 14 + 1 0 0 0 ==> 16 1 0 0 1 ==> 18 + 1 0 1 0 ==> 20 1 0 1 1 ==> 22 + + + + 1 1 0 0 ==> 24 1 1 0 1 ==> 26 + 1 1 1 0 ==> 28 1 1 1 1 ==> 30" + ::= { ipCidrRouteEntry 3 } + +ipCidrRouteNextHop OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "On remote routes, the address of the next system en + route; Otherwise, 0.0.0.0." + ::= { ipCidrRouteEntry 4 } + +ipCidrRouteIfIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached." + DEFVAL { 0 } + ::= { ipCidrRouteEntry 5 } + +ipCidrRouteType OBJECT-TYPE + SYNTAX INTEGER { + other (1), -- not specified by this MIB + reject (2), -- route that discards traffic + local (3), -- local interface + remote (4) -- remote destination + } + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The type of route. Note that local(3) refers to a + route for which the next hop is the final destination; + remote(4) refers to a route for which the next hop is + not the final destination. + + Routes that do not result in traffic forwarding or + rejection should not be displayed, even if the + implementation keeps them stored internally. + + reject (2) refers to a route that, if matched, + discards the message as unreachable. This is used in + some protocols as a means of correctly aggregating + routes." + ::= { ipCidrRouteEntry 6 } + + + + +ipCidrRouteProto OBJECT-TYPE + SYNTAX INTEGER { + other (1), -- not specified + local (2), -- local interface + netmgmt (3), -- static route + icmp (4), -- result of ICMP Redirect + + -- the following are all dynamic + -- routing protocols + egp (5), -- Exterior Gateway Protocol + ggp (6), -- Gateway-Gateway Protocol + hello (7), -- FuzzBall HelloSpeak + rip (8), -- Berkeley RIP or RIP-II + isIs (9), -- Dual IS-IS + esIs (10), -- ISO 9542 + ciscoIgrp (11), -- Cisco IGRP + bbnSpfIgp (12), -- BBN SPF IGP + ospf (13), -- Open Shortest Path First + bgp (14), -- Border Gateway Protocol + idpr (15), -- InterDomain Policy Routing + ciscoEigrp (16) -- Cisco EIGRP + } + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The routing mechanism via which this route was learned. + Inclusion of values for gateway routing protocols is + not intended to imply that hosts should support those + protocols." + ::= { ipCidrRouteEntry 7 } + +ipCidrRouteAge OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of seconds since this route was last updated + or otherwise determined to be correct. Note that no + semantics of `too old' can be implied, except through + knowledge of the routing protocol by which the route + was learned." + DEFVAL { 0 } + ::= { ipCidrRouteEntry 8 } + +ipCidrRouteInfo OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + + + + STATUS deprecated + DESCRIPTION + "A reference to MIB definitions specific to the + particular routing protocol that is responsible for + this route, as determined by the value specified in the + route's ipCidrRouteProto value. If this information is + not present, its value should be set to the OBJECT + IDENTIFIER { 0 0 }, which is a syntactically valid + object identifier, and any implementation conforming to + ASN.1 and the Basic Encoding Rules must be able to + generate and recognize this value." + ::= { ipCidrRouteEntry 9 } + +ipCidrRouteNextHopAS OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The Autonomous System Number of the Next Hop. The + semantics of this object are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. When this object is unknown or not relevant, its + value should be set to zero." + DEFVAL { 0 } + ::= { ipCidrRouteEntry 10 } + +ipCidrRouteMetric1 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The primary routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { ipCidrRouteEntry 11 } + +ipCidrRouteMetric2 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. If this metric is not used, its value should be + + + + set to -1." + DEFVAL { -1 } + ::= { ipCidrRouteEntry 12 } + +ipCidrRouteMetric3 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { ipCidrRouteEntry 13 } + +ipCidrRouteMetric4 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { ipCidrRouteEntry 14 } + +ipCidrRouteMetric5 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipCidrRouteProto + value. If this metric is not used, its value should be + set to -1." + DEFVAL { -1 } + ::= { ipCidrRouteEntry 15 } + +ipCidrRouteStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + + + + "The row status variable, used according to row + installation and removal conventions." + ::= { ipCidrRouteEntry 16 } + +-- compliance statements + +ipForwardCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for SNMPv2 entities that + implement the ipForward MIB. + + This compliance statement has been deprecated and + replaced with ipForwardFullCompliance and + ipForwardReadOnlyCompliance." + + MODULE -- this module + MANDATORY-GROUPS { ipForwardCidrRouteGroup } + + ::= { ipForwardCompliances 1 } + +-- units of conformance + +ipForwardCidrRouteGroup OBJECT-GROUP + OBJECTS { ipCidrRouteNumber, + ipCidrRouteDest, ipCidrRouteMask, ipCidrRouteTos, + ipCidrRouteNextHop, ipCidrRouteIfIndex, + ipCidrRouteType, ipCidrRouteProto, ipCidrRouteAge, + ipCidrRouteInfo,ipCidrRouteNextHopAS, + ipCidrRouteMetric1, ipCidrRouteMetric2, + ipCidrRouteMetric3, ipCidrRouteMetric4, + ipCidrRouteMetric5, ipCidrRouteStatus + } + STATUS deprecated + DESCRIPTION + "The CIDR Route Table. + + This group has been deprecated and replaced with + inetForwardCidrRouteGroup." + ::= { ipForwardGroups 3 } + +-- Obsoleted Definitions - Objects + +ipForwardNumber OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + + + + "The number of current ipForwardTable entries that are + not invalid." + ::= { ipForward 1 } + +-- IP Forwarding Table + +-- The IP Forwarding Table obsoletes and replaces the ipRoute +-- Table current in MIB-I and MIB-II. It adds knowledge of +-- the autonomous system of the next hop, multiple next hop +-- support, and policy routing support. + +ipForwardTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpForwardEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "This entity's IP Routing table." + REFERENCE + "RFC 1213 Section 6.6, The IP Group" + ::= { ipForward 2 } + +ipForwardEntry OBJECT-TYPE + SYNTAX IpForwardEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A particular route to a particular destination, under a + particular policy." + INDEX { + ipForwardDest, + ipForwardProto, + ipForwardPolicy, + ipForwardNextHop + } + ::= { ipForwardTable 1 } + +IpForwardEntry ::= SEQUENCE { + ipForwardDest IpAddress, + ipForwardMask IpAddress, + ipForwardPolicy Integer32, + ipForwardNextHop IpAddress, + ipForwardIfIndex Integer32, + ipForwardType INTEGER, + ipForwardProto INTEGER, + ipForwardAge Integer32, + ipForwardInfo OBJECT IDENTIFIER, + ipForwardNextHopAS Integer32, + ipForwardMetric1 Integer32, + + + + ipForwardMetric2 Integer32, + ipForwardMetric3 Integer32, + ipForwardMetric4 Integer32, + ipForwardMetric5 Integer32 + } + +ipForwardDest OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The destination IP address of this route. An entry + with a value of 0.0.0.0 is considered a default route. + + This object may not take a Multicast (Class D) address + value. + + Any assignment (implicit or otherwise) of an instance + of this object to a value x must be rejected if the + bitwise logical-AND of x with the value of the + corresponding instance of the ipForwardMask object is + not equal to x." + ::= { ipForwardEntry 1 } + +ipForwardMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Indicate the mask to be logical-ANDed with the + destination address before being compared to the value + in the ipForwardDest field. For those systems that do + not support arbitrary subnet masks, an agent constructs + the value of the ipForwardMask by reference to the IP + Address Class. + + Any assignment (implicit or otherwise) of an instance + of this object to a value x must be rejected if the + bitwise logical-AND of x with the value of the + corresponding instance of the ipForwardDest object is + not equal to ipForwardDest." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { ipForwardEntry 2 } + +-- The following convention is included for specification +-- of TOS Field contents. At this time, the Host Requirements +-- and the Router Requirements documents disagree on the width +-- of the TOS field. This mapping describes the Router + + + +-- Requirements mapping, and leaves room to widen the TOS field +-- without impact to fielded systems. + +ipForwardPolicy OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The general set of conditions that would cause + the selection of one multipath route (set of + next hops for a given destination) is referred + to as 'policy'. + + Unless the mechanism indicated by ipForwardProto + specifies otherwise, the policy specifier is + the IP TOS Field. The encoding of IP TOS is as + specified by the following convention. Zero + indicates the default path if no more specific + policy applies. + + +-----+-----+-----+-----+-----+-----+-----+-----+ + | | | | + | PRECEDENCE | TYPE OF SERVICE | 0 | + | | | | + +-----+-----+-----+-----+-----+-----+-----+-----+ + + + + IP TOS IP TOS + Field Policy Field Policy + Contents Code Contents Code + 0 0 0 0 ==> 0 0 0 0 1 ==> 2 + 0 0 1 0 ==> 4 0 0 1 1 ==> 6 + 0 1 0 0 ==> 8 0 1 0 1 ==> 10 + 0 1 1 0 ==> 12 0 1 1 1 ==> 14 + 1 0 0 0 ==> 16 1 0 0 1 ==> 18 + 1 0 1 0 ==> 20 1 0 1 1 ==> 22 + 1 1 0 0 ==> 24 1 1 0 1 ==> 26 + 1 1 1 0 ==> 28 1 1 1 1 ==> 30 + + Protocols defining 'policy' otherwise must either + define a set of values that are valid for + this object or must implement an integer-instanced + policy table for which this object's + value acts as an index." + ::= { ipForwardEntry 3 } + +ipForwardNextHop OBJECT-TYPE + + + + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "On remote routes, the address of the next system en + route; otherwise, 0.0.0.0." + ::= { ipForwardEntry 4 } + +ipForwardIfIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The ifIndex value that identifies the local interface + through which the next hop of this route should be + reached." + DEFVAL { 0 } + ::= { ipForwardEntry 5 } + +ipForwardType OBJECT-TYPE + SYNTAX INTEGER { + other (1), -- not specified by this MIB + invalid (2), -- logically deleted + local (3), -- local interface + remote (4) -- remote destination + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The type of route. Note that local(3) refers to a + route for which the next hop is the final destination; + remote(4) refers to a route for which the next hop is + not the final destination. + + Setting this object to the value invalid(2) has the + effect of invalidating the corresponding entry in the + ipForwardTable object. That is, it effectively + disassociates the destination identified with said + entry from the route identified with said entry. It is + an implementation-specific matter as to whether the + agent removes an invalidated entry from the table. + Accordingly, management stations must be prepared to + receive tabular information from agents that + corresponds to entries not currently in use. Proper + interpretation of such entries requires examination of + the relevant ipForwardType object." + DEFVAL { invalid } + ::= { ipForwardEntry 6 } + + + + +ipForwardProto OBJECT-TYPE + SYNTAX INTEGER { + other (1), -- not specified + local (2), -- local interface + netmgmt (3), -- static route + icmp (4), -- result of ICMP Redirect + + -- the following are all dynamic + -- routing protocols + egp (5), -- Exterior Gateway Protocol + ggp (6), -- Gateway-Gateway Protocol + hello (7), -- FuzzBall HelloSpeak + rip (8), -- Berkeley RIP or RIP-II + is-is (9), -- Dual IS-IS + es-is (10), -- ISO 9542 + ciscoIgrp (11), -- Cisco IGRP + bbnSpfIgp (12), -- BBN SPF IGP + ospf (13), -- Open Shortest Path First + bgp (14), -- Border Gateway Protocol + idpr (15) -- InterDomain Policy Routing + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The routing mechanism via which this route was learned. + Inclusion of values for gateway routing protocols is + not intended to imply that hosts should support those + protocols." + ::= { ipForwardEntry 7 } + +ipForwardAge OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The number of seconds since this route was last updated + or otherwise determined to be correct. Note that no + semantics of `too old' can be implied except through + knowledge of the routing protocol by which the route + was learned." + DEFVAL { 0 } + ::= { ipForwardEntry 8 } + +ipForwardInfo OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-create + STATUS obsolete + + + + DESCRIPTION + "A reference to MIB definitions specific to the + particular routing protocol that is responsible for + this route, as determined by the value specified in the + route's ipForwardProto value. If this information is + not present, its value should be set to the OBJECT + IDENTIFIER { 0 0 }, which is a syntactically valid + object identifier, and any implementation conforming to + ASN.1 and the Basic Encoding Rules must be able to + generate and recognize this value." + ::= { ipForwardEntry 9 } + +ipForwardNextHopAS OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The Autonomous System Number of the Next Hop. When + this is unknown or not relevant to the protocol + indicated by ipForwardProto, zero." + DEFVAL { 0 } + ::= { ipForwardEntry 10 } + +ipForwardMetric1 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The primary routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipForwardProto value. + If this metric is not used, its value should be set to + -1." + DEFVAL { -1 } + ::= { ipForwardEntry 11 } + +ipForwardMetric2 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipForwardProto value. + If this metric is not used, its value should be set to + -1." + DEFVAL { -1 } + ::= { ipForwardEntry 12 } + + + + +ipForwardMetric3 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipForwardProto value. + If this metric is not used, its value should be set to + -1." + DEFVAL { -1 } + ::= { ipForwardEntry 13 } + +ipForwardMetric4 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipForwardProto value. + If this metric is not used, its value should be set to + -1." + DEFVAL { -1 } + ::= { ipForwardEntry 14 } + +ipForwardMetric5 OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "An alternate routing metric for this route. The + semantics of this metric are determined by the routing- + protocol specified in the route's ipForwardProto value. + If this metric is not used, its value should be set to + -1." + DEFVAL { -1 } + ::= { ipForwardEntry 15 } + +-- Obsoleted Definitions - Groups +-- compliance statements + +ipForwardOldCompliance MODULE-COMPLIANCE + STATUS obsolete + DESCRIPTION + "The compliance statement for SNMP entities that + implement the ipForward MIB." + + + + + MODULE -- this module + MANDATORY-GROUPS { ipForwardMultiPathGroup } + + ::= { ipForwardCompliances 2 } + +ipForwardMultiPathGroup OBJECT-GROUP + OBJECTS { ipForwardNumber, + ipForwardDest, ipForwardMask, ipForwardPolicy, + ipForwardNextHop, ipForwardIfIndex, ipForwardType, + ipForwardProto, ipForwardAge, ipForwardInfo, + ipForwardNextHopAS, + ipForwardMetric1, ipForwardMetric2, ipForwardMetric3, + ipForwardMetric4, ipForwardMetric5 + } + STATUS obsolete + DESCRIPTION + "IP Multipath Route Table." + ::= { ipForwardGroups 2 } + +END

Added: trunk/mibs/IP-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/IP-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,5254 @@ +IP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Integer32, Counter32, IpAddress, + mib-2, Unsigned32, Counter64, + zeroDotZero FROM SNMPv2-SMI + PhysAddress, TruthValue, + TimeStamp, RowPointer, + TEXTUAL-CONVENTION, TestAndIncr, + RowStatus, StorageType FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + InetAddress, InetAddressType, + InetAddressPrefixLength, + InetVersion, InetZoneIndex FROM INET-ADDRESS-MIB + InterfaceIndex FROM IF-MIB; + +ipMIB MODULE-IDENTITY + LAST-UPDATED "200602020000Z" + ORGANIZATION "IETF IPv6 MIB Revision Team" + CONTACT-INFO + "Editor: + + + + Shawn A. Routhier + Interworking Labs + 108 Whispering Pines Dr. Suite 235 + Scotts Valley, CA 95066 + USA + EMail: sar@iwl.com" + DESCRIPTION + "The MIB module for managing IP and ICMP implementations, but + excluding their management of IP routes. + + Copyright (C) The Internet Society (2006). This version of + this MIB module is part of RFC 4293; see the RFC itself for + full legal notices." + + REVISION "200602020000Z" + DESCRIPTION + "The IP version neutral revision with added IPv6 objects for + ND, default routers, and router advertisements. As well as + being the successor to RFC 2011, this MIB is also the + successor to RFCs 2465 and 2466. Published as RFC 4293." + + REVISION "199411010000Z" + DESCRIPTION + "A separate MIB module (IP-MIB) for IP and ICMP management + objects. Published as RFC 2011." + + REVISION "199103310000Z" + DESCRIPTION + "The initial revision of this MIB module was part of MIB-II, + which was published as RFC 1213." + ::= { mib-2 48} + +-- +-- The textual conventions we define and use in this MIB. +-- + +IpAddressOriginTC ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The origin of the address. + + manual(2) indicates that the address was manually configured + to a specified address, e.g., by user configuration. + + dhcp(4) indicates an address that was assigned to this + system by a DHCP server. + + linklayer(5) indicates an address created by IPv6 stateless + + + + auto-configuration. + + random(6) indicates an address chosen by the system at + random, e.g., an IPv4 address within 169.254/16, or an RFC + 3041 privacy address." + SYNTAX INTEGER { + other(1), + manual(2), + dhcp(4), + linklayer(5), + random(6) + } + +IpAddressStatusTC ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The status of an address. Most of the states correspond to + states from the IPv6 Stateless Address Autoconfiguration + protocol. + + The preferred(1) state indicates that this is a valid + address that can appear as the destination or source address + of a packet. + + The deprecated(2) state indicates that this is a valid but + deprecated address that should no longer be used as a source + address in new communications, but packets addressed to such + an address are processed as expected. + + The invalid(3) state indicates that this isn't a valid + address and it shouldn't appear as the destination or source + address of a packet. + + The inaccessible(4) state indicates that the address is not + accessible because the interface to which this address is + assigned is not operational. + + The unknown(5) state indicates that the status cannot be + determined for some reason. + + The tentative(6) state indicates that the uniqueness of the + address on the link is being verified. Addresses in this + state should not be used for general communication and + should only be used to determine the uniqueness of the + address. + + The duplicate(7) state indicates the address has been + determined to be non-unique on the link and so must not be + + + + used. + + The optimistic(8) state indicates the address is available + for use, subject to restrictions, while its uniqueness on + a link is being verified. + + In the absence of other information, an IPv4 address is + always preferred(1)." + REFERENCE "RFC 2462" + SYNTAX INTEGER { + preferred(1), + deprecated(2), + invalid(3), + inaccessible(4), + unknown(5), + tentative(6), + duplicate(7), + optimistic(8) + } + +IpAddressPrefixOriginTC ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The origin of this prefix. + + manual(2) indicates a prefix that was manually configured. + + wellknown(3) indicates a well-known prefix, e.g., 169.254/16 + for IPv4 auto-configuration or fe80::/10 for IPv6 link-local + addresses. Well known prefixes may be assigned by IANA, + the address registries, or by specification in a standards + track RFC. + + dhcp(4) indicates a prefix that was assigned by a DHCP + server. + + routeradv(5) indicates a prefix learned from a router + advertisement. + + Note: while IpAddressOriginTC and IpAddressPrefixOriginTC + are similar, they are not identical. The first defines how + an address was created, while the second defines how a + prefix was found." + SYNTAX INTEGER { + other(1), + manual(2), + wellknown(3), + dhcp(4), + + + + routeradv(5) + } + +Ipv6AddressIfIdentifierTC ::= TEXTUAL-CONVENTION + DISPLAY-HINT "2x:" + STATUS current + DESCRIPTION + "This data type is used to model IPv6 address + interface identifiers. This is a binary string + of up to 8 octets in network byte-order." + SYNTAX OCTET STRING (SIZE (0..8)) + +-- +-- the IP general group +-- some objects that affect all of IPv4 +-- + +ip OBJECT IDENTIFIER ::= { mib-2 4 } + +ipForwarding OBJECT-TYPE + SYNTAX INTEGER { + forwarding(1), -- acting as a router + notForwarding(2) -- NOT acting as a router + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether this entity is acting as an IPv4 + router in respect to the forwarding of datagrams received + by, but not addressed to, this entity. IPv4 routers forward + datagrams. IPv4 hosts do not (except those source-routed + via the host). + + When this object is written, the entity should save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system. + Note: a stronger requirement is not used because this object + was previously defined." + ::= { ip 1 } + +ipDefaultTTL OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The default value inserted into the Time-To-Live field of + the IPv4 header of datagrams originated at this entity, + whenever a TTL value is not supplied by the transport layer + + + + protocol. + + When this object is written, the entity should save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system. + Note: a stronger requirement is not used because this object + was previously defined." + ::= { ip 2 } + +ipReasmTimeout OBJECT-TYPE + SYNTAX Integer32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of seconds that received fragments are + held while they are awaiting reassembly at this entity." + ::= { ip 13 } + +-- +-- the IPv6 general group +-- Some objects that affect all of IPv6 +-- + +ipv6IpForwarding OBJECT-TYPE + SYNTAX INTEGER { + forwarding(1), -- acting as a router + notForwarding(2) -- NOT acting as a router + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether this entity is acting as an IPv6 + router on any interface in respect to the forwarding of + datagrams received by, but not addressed to, this entity. + IPv6 routers forward datagrams. IPv6 hosts do not (except + those source-routed via the host). + + When this object is written, the entity SHOULD save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system." + ::= { ip 25 } + +ipv6IpDefaultHopLimit OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + + + + "The default value inserted into the Hop Limit field of the + IPv6 header of datagrams originated at this entity whenever + a Hop Limit value is not supplied by the transport layer + protocol. + + When this object is written, the entity SHOULD save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system." + REFERENCE "RFC 2461 Section 6.3.2" + ::= { ip 26 } + +-- +-- IPv4 Interface Table +-- + +ipv4InterfaceTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion at which + a row in the ipv4InterfaceTable was added or deleted, or + when an ipv4InterfaceReasmMaxSize or an + ipv4InterfaceEnableStatus object was modified. + + If new objects are added to the ipv4InterfaceTable that + require the ipv4InterfaceTableLastChange to be updated when + they are modified, they must specify that requirement in + their description clause." + ::= { ip 27 } + +ipv4InterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv4InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table containing per-interface IPv4-specific + information." + ::= { ip 28 } + +ipv4InterfaceEntry OBJECT-TYPE + SYNTAX Ipv4InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing IPv4-specific information for a specific + interface." + INDEX { ipv4InterfaceIfIndex } + + + + ::= { ipv4InterfaceTable 1 } + +Ipv4InterfaceEntry ::= SEQUENCE { + ipv4InterfaceIfIndex InterfaceIndex, + ipv4InterfaceReasmMaxSize Integer32, + ipv4InterfaceEnableStatus INTEGER, + ipv4InterfaceRetransmitTime Unsigned32 + } + +ipv4InterfaceIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipv4InterfaceEntry 1 } + +ipv4InterfaceReasmMaxSize OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of the largest IPv4 datagram that this entity can + re-assemble from incoming IPv4 fragmented datagrams received + on this interface." + ::= { ipv4InterfaceEntry 2 } + +ipv4InterfaceEnableStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether IPv4 is enabled (up) or disabled + (down) on this interface. This object does not affect the + state of the interface itself, only its connection to an + IPv4 stack. The IF-MIB should be used to control the state + of the interface." + ::= { ipv4InterfaceEntry 3 } + +ipv4InterfaceRetransmitTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milliseconds" + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time between retransmissions of ARP requests to a + neighbor when resolving the address or when probing the + reachability of a neighbor." + REFERENCE "RFC 1122" + DEFVAL { 1000 } + ::= { ipv4InterfaceEntry 4 } + +-- +-- v6 interface table +-- + +ipv6InterfaceTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion at which + a row in the ipv6InterfaceTable was added or deleted or when + an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, + ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, + ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding + object was modified. + + If new objects are added to the ipv6InterfaceTable that + require the ipv6InterfaceTableLastChange to be updated when + they are modified, they must specify that requirement in + their description clause." + ::= { ip 29 } + +ipv6InterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table containing per-interface IPv6-specific + information." + ::= { ip 30 } + +ipv6InterfaceEntry OBJECT-TYPE + SYNTAX Ipv6InterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing IPv6-specific information for a given + interface." + + + + INDEX { ipv6InterfaceIfIndex } + ::= { ipv6InterfaceTable 1 } + +Ipv6InterfaceEntry ::= SEQUENCE { + ipv6InterfaceIfIndex InterfaceIndex, + ipv6InterfaceReasmMaxSize Unsigned32, + ipv6InterfaceIdentifier Ipv6AddressIfIdentifierTC, + ipv6InterfaceEnableStatus INTEGER, + ipv6InterfaceReachableTime Unsigned32, + ipv6InterfaceRetransmitTime Unsigned32, + ipv6InterfaceForwarding INTEGER + } + +ipv6InterfaceIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipv6InterfaceEntry 1 } + +ipv6InterfaceReasmMaxSize OBJECT-TYPE + SYNTAX Unsigned32 (1500..65535) + UNITS "octets" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The size of the largest IPv6 datagram that this entity can + re-assemble from incoming IPv6 fragmented datagrams received + on this interface." + ::= { ipv6InterfaceEntry 2 } + +ipv6InterfaceIdentifier OBJECT-TYPE + SYNTAX Ipv6AddressIfIdentifierTC + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Interface Identifier for this interface. The Interface + Identifier is combined with an address prefix to form an + interface address. + + By default, the Interface Identifier is auto-configured + according to the rules of the link type to which this + interface is attached. + + + + + A zero length identifier may be used where appropriate. One + possible example is a loopback interface." + ::= { ipv6InterfaceEntry 3 } + +-- This object ID is reserved as it was used in earlier versions of +-- the MIB module. In theory, OIDs are not assigned until the +-- specification is released as an RFC; however, as some companies +-- may have shipped code based on earlier versions of the MIB, it +-- seems best to reserve this OID. This OID had been +-- ipv6InterfacePhysicalAddress. +-- ::= { ipv6InterfaceEntry 4} + +ipv6InterfaceEnableStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether IPv6 is enabled (up) or disabled + (down) on this interface. This object does not affect the + state of the interface itself, only its connection to an + IPv6 stack. The IF-MIB should be used to control the state + of the interface. + + When this object is written, the entity SHOULD save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system." + ::= { ipv6InterfaceEntry 5 } + +ipv6InterfaceReachableTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time a neighbor is considered reachable after receiving + a reachability confirmation." + REFERENCE "RFC 2461, Section 6.3.2" + ::= { ipv6InterfaceEntry 6 } + +ipv6InterfaceRetransmitTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milliseconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + + "The time between retransmissions of Neighbor Solicitation + messages to a neighbor when resolving the address or when + probing the reachability of a neighbor." + REFERENCE "RFC 2461, Section 6.3.2" + ::= { ipv6InterfaceEntry 7 } + +ipv6InterfaceForwarding OBJECT-TYPE + SYNTAX INTEGER { + forwarding(1), -- acting as a router + notForwarding(2) -- NOT acting as a router + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The indication of whether this entity is acting as an IPv6 + router on this interface with respect to the forwarding of + datagrams received by, but not addressed to, this entity. + IPv6 routers forward datagrams. IPv6 hosts do not (except + those source-routed via the host). + + This object is constrained by ipv6IpForwarding and is + ignored if ipv6IpForwarding is set to notForwarding. Those + systems that do not provide per-interface control of the + forwarding function should set this object to forwarding for + all interfaces and allow the ipv6IpForwarding object to + control the forwarding capability. + + When this object is written, the entity SHOULD save the + change to non-volatile storage and restore the object from + non-volatile storage upon re-initialization of the system." + ::= { ipv6InterfaceEntry 8 } + +-- +-- Per-Interface or System-Wide IP statistics. +-- +-- The following two tables, ipSystemStatsTable and ipIfStatsTable, +-- are intended to provide the same counters at different granularities. +-- The ipSystemStatsTable provides system wide counters aggregating +-- the traffic counters for all interfaces for a given address type. +-- The ipIfStatsTable provides the same counters but for specific +-- interfaces rather than as an aggregate. +-- +-- Note well: If a system provides both system-wide and interface- +-- specific values, the system-wide value may not be equal to the sum +-- of the interface-specific values across all interfaces due to e.g., +-- dynamic interface creation/deletion. +-- +-- Note well: Both of these tables contain some items that are + + + +-- represented by two objects, representing the value in either 32 +-- or 64 bits. For those objects, the 32-bit value MUST be the low +-- order 32 bits of the 64-bit value. Also note that the 32-bit +-- counters must be included when the 64-bit counters are included. + +ipTrafficStats OBJECT IDENTIFIER ::= { ip 31 } + +ipSystemStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpSystemStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table containing system wide, IP version specific + traffic statistics. This table and the ipIfStatsTable + contain similar objects whose difference is in their + granularity. Where this table contains system wide traffic + statistics, the ipIfStatsTable contains the same statistics + but counted on a per-interface basis." + ::= { ipTrafficStats 1 } + +ipSystemStatsEntry OBJECT-TYPE + SYNTAX IpSystemStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A statistics entry containing system-wide objects for a + particular IP version." + INDEX { ipSystemStatsIPVersion } + ::= { ipSystemStatsTable 1 } + +IpSystemStatsEntry ::= SEQUENCE { + ipSystemStatsIPVersion InetVersion, + ipSystemStatsInReceives Counter32, + ipSystemStatsHCInReceives Counter64, + ipSystemStatsInOctets Counter32, + ipSystemStatsHCInOctets Counter64, + ipSystemStatsInHdrErrors Counter32, + ipSystemStatsInNoRoutes Counter32, + ipSystemStatsInAddrErrors Counter32, + ipSystemStatsInUnknownProtos Counter32, + ipSystemStatsInTruncatedPkts Counter32, + ipSystemStatsInForwDatagrams Counter32, + ipSystemStatsHCInForwDatagrams Counter64, + ipSystemStatsReasmReqds Counter32, + ipSystemStatsReasmOKs Counter32, + ipSystemStatsReasmFails Counter32, + ipSystemStatsInDiscards Counter32, + ipSystemStatsInDelivers Counter32, + + + + ipSystemStatsHCInDelivers Counter64, + ipSystemStatsOutRequests Counter32, + ipSystemStatsHCOutRequests Counter64, + ipSystemStatsOutNoRoutes Counter32, + ipSystemStatsOutForwDatagrams Counter32, + ipSystemStatsHCOutForwDatagrams Counter64, + ipSystemStatsOutDiscards Counter32, + ipSystemStatsOutFragReqds Counter32, + ipSystemStatsOutFragOKs Counter32, + ipSystemStatsOutFragFails Counter32, + ipSystemStatsOutFragCreates Counter32, + ipSystemStatsOutTransmits Counter32, + ipSystemStatsHCOutTransmits Counter64, + ipSystemStatsOutOctets Counter32, + ipSystemStatsHCOutOctets Counter64, + ipSystemStatsInMcastPkts Counter32, + ipSystemStatsHCInMcastPkts Counter64, + ipSystemStatsInMcastOctets Counter32, + ipSystemStatsHCInMcastOctets Counter64, + ipSystemStatsOutMcastPkts Counter32, + ipSystemStatsHCOutMcastPkts Counter64, + ipSystemStatsOutMcastOctets Counter32, + ipSystemStatsHCOutMcastOctets Counter64, + ipSystemStatsInBcastPkts Counter32, + ipSystemStatsHCInBcastPkts Counter64, + ipSystemStatsOutBcastPkts Counter32, + ipSystemStatsHCOutBcastPkts Counter64, + ipSystemStatsDiscontinuityTime TimeStamp, + ipSystemStatsRefreshRate Unsigned32 + } + +ipSystemStatsIPVersion OBJECT-TYPE + SYNTAX InetVersion + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP version of this row." + ::= { ipSystemStatsEntry 1 } + +-- This object ID is reserved to allow the IDs for this table's objects +-- to align with the objects in the ipIfStatsTable. +-- ::= { ipSystemStatsEntry 2 } + +ipSystemStatsInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + + "The total number of input IP datagrams received, including + those received in error. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 3 } + +ipSystemStatsHCInReceives OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of input IP datagrams received, including + those received in error. This object counts the same + datagrams as ipSystemStatsInReceives, but allows for larger + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 4 } + +ipSystemStatsInOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in input IP datagrams, + including those received in error. Octets from datagrams + counted in ipSystemStatsInReceives MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 5 } + +ipSystemStatsHCInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in input IP datagrams, + including those received in error. This object counts the + same octets as ipSystemStatsInOctets, but allows for larger + + + + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 6 } + +ipSystemStatsInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded due to errors in + their IP headers, including version number mismatch, other + format errors, hop count exceeded, errors discovered in + processing their IP options, etc. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 7 } + +ipSystemStatsInNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because no route + could be found to transmit them to their destination. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 8 } + +ipSystemStatsInAddrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because the IP + address in their IP header's destination field was not a + valid address to be received at this entity. This count + includes invalid addresses (e.g., ::0). For entities + that are not IP routers and therefore do not forward + + + + datagrams, this counter includes datagrams discarded + because the destination address was not a local address. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 9 } + +ipSystemStatsInUnknownProtos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of locally-addressed IP datagrams received + successfully but discarded because of an unknown or + unsupported protocol. + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 10 } + +ipSystemStatsInTruncatedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because the + datagram frame didn't carry enough data. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 11 } + +ipSystemStatsInForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + + "The number of input datagrams for which this entity was not + their final IP destination and for which this entity + attempted to find a route to forward them to that final + destination. In entities that do not act as IP routers, + this counter will include only those datagrams that were + Source-Routed via this entity, and the Source-Route + processing was successful. + + When tracking interface statistics, the counter of the + incoming interface is incremented for each datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 12 } + +ipSystemStatsHCInForwDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams for which this entity was not + their final IP destination and for which this entity + attempted to find a route to forward them to that final + destination. This object counts the same packets as + ipSystemStatsInForwDatagrams, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 13 } + +ipSystemStatsReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP fragments received that needed to be + reassembled at this interface. + + When tracking interface statistics, the counter of the + interface to which these fragments were addressed is + incremented. This interface might not be the same as the + input interface for some of the fragments. + + Discontinuities in the value of this counter can occur at + + + + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 14 } + +ipSystemStatsReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams successfully reassembled. + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 15 } + +ipSystemStatsReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of failures detected by the IP re-assembly + algorithm (for whatever reason: timed out, errors, etc.). + Note that this is not necessarily a count of discarded IP + fragments since some algorithms (notably the algorithm in + RFC 815) can lose track of the number of fragments by + combining them as they are received. + + When tracking interface statistics, the counter of the + interface to which these fragments were addressed is + incremented. This interface might not be the same as the + input interface for some of the fragments. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 16 } + +ipSystemStatsInDiscards OBJECT-TYPE + SYNTAX Counter32 + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams for which no problems were + encountered to prevent their continued processing, but + were discarded (e.g., for lack of buffer space). Note that + this counter does not include any datagrams discarded while + awaiting re-assembly. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 17 } + +ipSystemStatsInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of datagrams successfully delivered to IP + user-protocols (including ICMP). + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 18 } + +ipSystemStatsHCInDelivers OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of datagrams successfully delivered to IP + user-protocols (including ICMP). This object counts the + same packets as ipSystemStatsInDelivers, but allows for + larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + + + + ::= { ipSystemStatsEntry 19 } + +ipSystemStatsOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that local IP user- + protocols (including ICMP) supplied to IP in requests for + transmission. Note that this counter does not include any + datagrams counted in ipSystemStatsOutForwDatagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 20 } + +ipSystemStatsHCOutRequests OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that local IP user- + protocols (including ICMP) supplied to IP in requests for + transmission. This object counts the same packets as + ipSystemStatsOutRequests, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 21 } + +ipSystemStatsOutNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of locally generated IP datagrams discarded + because no route could be found to transmit them to their + destination. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 22 } + + + +ipSystemStatsOutForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of datagrams for which this entity was not their + final IP destination and for which it was successful in + finding a path to their final destination. In entities + that do not act as IP routers, this counter will include + only those datagrams that were Source-Routed via this + entity, and the Source-Route processing was successful. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + forwarded datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 23 } + +ipSystemStatsHCOutForwDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of datagrams for which this entity was not their + final IP destination and for which it was successful in + finding a path to their final destination. This object + counts the same packets as ipSystemStatsOutForwDatagrams, + but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 24 } + +ipSystemStatsOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output IP datagrams for which no problem was + encountered to prevent their transmission to their + destination, but were discarded (e.g., for lack of + buffer space). Note that this counter would include + + + + datagrams counted in ipSystemStatsOutForwDatagrams if any + such datagrams met this (discretionary) discard criterion. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 25 } + +ipSystemStatsOutFragReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams that would require fragmentation + in order to be transmitted. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 26 } + +ipSystemStatsOutFragOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams that have been successfully + fragmented. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 27 } + +ipSystemStatsOutFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + + STATUS current + DESCRIPTION + "The number of IP datagrams that have been discarded because + they needed to be fragmented but could not be. This + includes IPv4 packets that have the DF bit set and IPv6 + packets that are being forwarded and exceed the outgoing + link MTU. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for an unsuccessfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 28 } + +ipSystemStatsOutFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output datagram fragments that have been + generated as a result of IP fragmentation. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 29 } + +ipSystemStatsOutTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that this entity supplied + to the lower layers for transmission. This includes + datagrams generated locally and those forwarded by this + entity. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + + + + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 30 } + +ipSystemStatsHCOutTransmits OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that this entity supplied + to the lower layers for transmission. This object counts + the same datagrams as ipSystemStatsOutTransmits, but allows + for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 31 } + +ipSystemStatsOutOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets in IP datagrams delivered to the + lower layers for transmission. Octets from datagrams + counted in ipSystemStatsOutTransmits MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 32 } + +ipSystemStatsHCOutOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets in IP datagrams delivered to the + lower layers for transmission. This objects counts the same + octets as ipSystemStatsOutOctets, but allows for larger + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + + + + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 33 } + +ipSystemStatsInMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams received. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 34 } + +ipSystemStatsHCInMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams received. This object + counts the same datagrams as ipSystemStatsInMcastPkts but + allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 35 } + +ipSystemStatsInMcastOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in IP multicast + datagrams. Octets from datagrams counted in + ipSystemStatsInMcastPkts MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 36 } + +ipSystemStatsHCInMcastOctets OBJECT-TYPE + SYNTAX Counter64 + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in IP multicast + datagrams. This object counts the same octets as + ipSystemStatsInMcastOctets, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 37 } + +ipSystemStatsOutMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams transmitted. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 38 } + +ipSystemStatsHCOutMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams transmitted. This + object counts the same datagrams as + ipSystemStatsOutMcastPkts, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 39 } + +ipSystemStatsOutMcastOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted in IP multicast + datagrams. Octets from datagrams counted in + + + + ipSystemStatsOutMcastPkts MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 40 } + +ipSystemStatsHCOutMcastOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted in IP multicast + datagrams. This object counts the same octets as + ipSystemStatsOutMcastOctets, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 41 } + +ipSystemStatsInBcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams received. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 42 } + +ipSystemStatsHCInBcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams received. This object + counts the same datagrams as ipSystemStatsInBcastPkts but + allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + + + + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 43 } + +ipSystemStatsOutBcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams transmitted. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 44 } + +ipSystemStatsHCOutBcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams transmitted. This + object counts the same datagrams as + ipSystemStatsOutBcastPkts, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipSystemStatsDiscontinuityTime." + ::= { ipSystemStatsEntry 45 } + +ipSystemStatsDiscontinuityTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion at which + any one or more of this entry's counters suffered a + discontinuity. + + If no such discontinuities have occurred since the last re- + initialization of the local management subsystem, then this + object contains a zero value." + ::= { ipSystemStatsEntry 46 } + +ipSystemStatsRefreshRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milli-seconds" + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum reasonable polling interval for this entry. + This object provides an indication of the minimum amount of + time required to update the counters in this entry." + ::= { ipSystemStatsEntry 47 } + +ipIfStatsTableLastChange OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion at which + a row in the ipIfStatsTable was added or deleted. + + If new objects are added to the ipIfStatsTable that require + the ipIfStatsTableLastChange to be updated when they are + modified, they must specify that requirement in their + description clause." + ::= { ipTrafficStats 2 } + +ipIfStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpIfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table containing per-interface traffic statistics. This + table and the ipSystemStatsTable contain similar objects + whose difference is in their granularity. Where this table + contains per-interface statistics, the ipSystemStatsTable + contains the same statistics, but counted on a system wide + basis." + ::= { ipTrafficStats 3 } + +ipIfStatsEntry OBJECT-TYPE + SYNTAX IpIfStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An interface statistics entry containing objects for a + particular interface and version of IP." + INDEX { ipIfStatsIPVersion, ipIfStatsIfIndex } + ::= { ipIfStatsTable 1 } + +IpIfStatsEntry ::= SEQUENCE { + ipIfStatsIPVersion InetVersion, + ipIfStatsIfIndex InterfaceIndex, + + + + ipIfStatsInReceives Counter32, + ipIfStatsHCInReceives Counter64, + ipIfStatsInOctets Counter32, + ipIfStatsHCInOctets Counter64, + ipIfStatsInHdrErrors Counter32, + ipIfStatsInNoRoutes Counter32, + ipIfStatsInAddrErrors Counter32, + ipIfStatsInUnknownProtos Counter32, + ipIfStatsInTruncatedPkts Counter32, + ipIfStatsInForwDatagrams Counter32, + ipIfStatsHCInForwDatagrams Counter64, + ipIfStatsReasmReqds Counter32, + ipIfStatsReasmOKs Counter32, + ipIfStatsReasmFails Counter32, + ipIfStatsInDiscards Counter32, + ipIfStatsInDelivers Counter32, + ipIfStatsHCInDelivers Counter64, + ipIfStatsOutRequests Counter32, + ipIfStatsHCOutRequests Counter64, + ipIfStatsOutForwDatagrams Counter32, + ipIfStatsHCOutForwDatagrams Counter64, + ipIfStatsOutDiscards Counter32, + ipIfStatsOutFragReqds Counter32, + ipIfStatsOutFragOKs Counter32, + ipIfStatsOutFragFails Counter32, + ipIfStatsOutFragCreates Counter32, + ipIfStatsOutTransmits Counter32, + ipIfStatsHCOutTransmits Counter64, + ipIfStatsOutOctets Counter32, + ipIfStatsHCOutOctets Counter64, + ipIfStatsInMcastPkts Counter32, + ipIfStatsHCInMcastPkts Counter64, + ipIfStatsInMcastOctets Counter32, + ipIfStatsHCInMcastOctets Counter64, + ipIfStatsOutMcastPkts Counter32, + ipIfStatsHCOutMcastPkts Counter64, + ipIfStatsOutMcastOctets Counter32, + ipIfStatsHCOutMcastOctets Counter64, + ipIfStatsInBcastPkts Counter32, + ipIfStatsHCInBcastPkts Counter64, + ipIfStatsOutBcastPkts Counter32, + ipIfStatsHCOutBcastPkts Counter64, + ipIfStatsDiscontinuityTime TimeStamp, + ipIfStatsRefreshRate Unsigned32 + } + +ipIfStatsIPVersion OBJECT-TYPE + SYNTAX InetVersion + + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP version of this row." + ::= { ipIfStatsEntry 1 } + +ipIfStatsIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipIfStatsEntry 2 } + +ipIfStatsInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of input IP datagrams received, including + those received in error. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 3 } + +ipIfStatsHCInReceives OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of input IP datagrams received, including + those received in error. This object counts the same + datagrams as ipIfStatsInReceives, but allows for larger + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 4 } + +ipIfStatsInOctets OBJECT-TYPE + + + + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in input IP datagrams, + including those received in error. Octets from datagrams + counted in ipIfStatsInReceives MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 5 } + +ipIfStatsHCInOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in input IP datagrams, + including those received in error. This object counts the + same octets as ipIfStatsInOctets, but allows for larger + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 6 } + +ipIfStatsInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded due to errors in + their IP headers, including version number mismatch, other + format errors, hop count exceeded, errors discovered in + processing their IP options, etc. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 7 } + +ipIfStatsInNoRoutes OBJECT-TYPE + SYNTAX Counter32 + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because no route + could be found to transmit them to their destination. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 8 } + +ipIfStatsInAddrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because the IP + address in their IP header's destination field was not a + valid address to be received at this entity. This count + includes invalid addresses (e.g., ::0). For entities that + are not IP routers and therefore do not forward datagrams, + this counter includes datagrams discarded because the + destination address was not a local address. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 9 } + +ipIfStatsInUnknownProtos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of locally-addressed IP datagrams received + successfully but discarded because of an unknown or + unsupported protocol. + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + + + + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 10 } + +ipIfStatsInTruncatedPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams discarded because the + datagram frame didn't carry enough data. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 11 } + +ipIfStatsInForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams for which this entity was not + their final IP destination and for which this entity + attempted to find a route to forward them to that final + destination. In entities that do not act as IP routers, + this counter will include only those datagrams that were + Source-Routed via this entity, and the Source-Route + processing was successful. + + When tracking interface statistics, the counter of the + incoming interface is incremented for each datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 12 } + +ipIfStatsHCInForwDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input datagrams for which this entity was not + their final IP destination and for which this entity + attempted to find a route to forward them to that final + destination. This object counts the same packets as + + + + ipIfStatsInForwDatagrams, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 13 } + +ipIfStatsReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP fragments received that needed to be + reassembled at this interface. + + When tracking interface statistics, the counter of the + interface to which these fragments were addressed is + incremented. This interface might not be the same as the + input interface for some of the fragments. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 14 } + +ipIfStatsReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams successfully reassembled. + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 15 } + +ipIfStatsReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + + + + STATUS current + DESCRIPTION + "The number of failures detected by the IP re-assembly + algorithm (for whatever reason: timed out, errors, etc.). + Note that this is not necessarily a count of discarded IP + fragments since some algorithms (notably the algorithm in + RFC 815) can lose track of the number of fragments by + combining them as they are received. + + When tracking interface statistics, the counter of the + interface to which these fragments were addressed is + incremented. This interface might not be the same as the + input interface for some of the fragments. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 16 } + +ipIfStatsInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input IP datagrams for which no problems were + encountered to prevent their continued processing, but + were discarded (e.g., for lack of buffer space). Note that + this counter does not include any datagrams discarded while + awaiting re-assembly. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 17 } + +ipIfStatsInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of datagrams successfully delivered to IP + user-protocols (including ICMP). + + When tracking interface statistics, the counter of the + interface to which these datagrams were addressed is + incremented. This interface might not be the same as the + + + + input interface for some of the datagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 18 } + +ipIfStatsHCInDelivers OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of datagrams successfully delivered to IP + user-protocols (including ICMP). This object counts the + same packets as ipIfStatsInDelivers, but allows for larger + values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 19 } + +ipIfStatsOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that local IP user- + protocols (including ICMP) supplied to IP in requests for + transmission. Note that this counter does not include any + datagrams counted in ipIfStatsOutForwDatagrams. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 20 } + +ipIfStatsHCOutRequests OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that local IP user- + protocols (including ICMP) supplied to IP in requests for + transmission. This object counts the same packets as + + + + ipIfStatsOutRequests, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 21 } + +-- This object ID is reserved to allow the IDs for this table's objects +-- to align with the objects in the ipSystemStatsTable. +-- ::= {ipIfStatsEntry 22} + +ipIfStatsOutForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of datagrams for which this entity was not their + final IP destination and for which it was successful in + finding a path to their final destination. In entities + that do not act as IP routers, this counter will include + only those datagrams that were Source-Routed via this + entity, and the Source-Route processing was successful. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + forwarded datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 23 } + +ipIfStatsHCOutForwDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of datagrams for which this entity was not their + final IP destination and for which it was successful in + finding a path to their final destination. This object + counts the same packets as ipIfStatsOutForwDatagrams, but + allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + + + + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 24 } + +ipIfStatsOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output IP datagrams for which no problem was + encountered to prevent their transmission to their + destination, but were discarded (e.g., for lack of + buffer space). Note that this counter would include + datagrams counted in ipIfStatsOutForwDatagrams if any such + datagrams met this (discretionary) discard criterion. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 25 } + +ipIfStatsOutFragReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams that would require fragmentation + in order to be transmitted. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 26 } + +ipIfStatsOutFragOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams that have been successfully + fragmented. + + When tracking interface statistics, the counter of the + + + + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 27 } + +ipIfStatsOutFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP datagrams that have been discarded because + they needed to be fragmented but could not be. This + includes IPv4 packets that have the DF bit set and IPv6 + packets that are being forwarded and exceed the outgoing + link MTU. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for an unsuccessfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 28 } + +ipIfStatsOutFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output datagram fragments that have been + generated as a result of IP fragmentation. + + When tracking interface statistics, the counter of the + outgoing interface is incremented for a successfully + fragmented datagram. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 29 } + + + + +ipIfStatsOutTransmits OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that this entity supplied + to the lower layers for transmission. This includes + datagrams generated locally and those forwarded by this + entity. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 30 } + +ipIfStatsHCOutTransmits OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of IP datagrams that this entity supplied + to the lower layers for transmission. This object counts + the same datagrams as ipIfStatsOutTransmits, but allows for + larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 31 } + +ipIfStatsOutOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets in IP datagrams delivered to the + lower layers for transmission. Octets from datagrams + counted in ipIfStatsOutTransmits MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 32 } + +ipIfStatsHCOutOctets OBJECT-TYPE + + + + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets in IP datagrams delivered to the + lower layers for transmission. This objects counts the same + octets as ipIfStatsOutOctets, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 33 } + +ipIfStatsInMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams received. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 34 } + +ipIfStatsHCInMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams received. This object + counts the same datagrams as ipIfStatsInMcastPkts, but + allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 35 } + +ipIfStatsInMcastOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in IP multicast + + + + datagrams. Octets from datagrams counted in + ipIfStatsInMcastPkts MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 36 } + +ipIfStatsHCInMcastOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets received in IP multicast + datagrams. This object counts the same octets as + ipIfStatsInMcastOctets, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 37 } + +ipIfStatsOutMcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams transmitted. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 38 } + +ipIfStatsHCOutMcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP multicast datagrams transmitted. This + object counts the same datagrams as ipIfStatsOutMcastPkts, + but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + + + + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 39 } + +ipIfStatsOutMcastOctets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted in IP multicast + datagrams. Octets from datagrams counted in + ipIfStatsOutMcastPkts MUST be counted here. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 40 } + +ipIfStatsHCOutMcastOctets OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of octets transmitted in IP multicast + datagrams. This object counts the same octets as + ipIfStatsOutMcastOctets, but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 41 } + +ipIfStatsInBcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams received. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 42 } + +ipIfStatsHCInBcastPkts OBJECT-TYPE + + + + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams received. This object + counts the same datagrams as ipIfStatsInBcastPkts, but + allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 43 } + +ipIfStatsOutBcastPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams transmitted. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 44 } + +ipIfStatsHCOutBcastPkts OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of IP broadcast datagrams transmitted. This + object counts the same datagrams as ipIfStatsOutBcastPkts, + but allows for larger values. + + Discontinuities in the value of this counter can occur at + re-initialization of the management system, and at other + times as indicated by the value of + ipIfStatsDiscontinuityTime." + ::= { ipIfStatsEntry 45 } + +ipIfStatsDiscontinuityTime OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime on the most recent occasion at which + + + + any one or more of this entry's counters suffered a + discontinuity. + + If no such discontinuities have occurred since the last re- + initialization of the local management subsystem, then this + object contains a zero value." + ::= { ipIfStatsEntry 46 } + +ipIfStatsRefreshRate OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milli-seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum reasonable polling interval for this entry. + This object provides an indication of the minimum amount of + time required to update the counters in this entry." + ::= { ipIfStatsEntry 47 } + +-- +-- Internet Address Prefix table +-- + +ipAddressPrefixTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpAddressPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table allows the user to determine the source of an IP + address or set of IP addresses, and allows other tables to + share the information via pointer rather than by copying. + + For example, when the node configures both a unicast and + anycast address for a prefix, the ipAddressPrefix objects + for those addresses will point to a single row in this + table. + + This table primarily provides support for IPv6 prefixes, and + several of the objects are less meaningful for IPv4. The + table continues to allow IPv4 addresses to allow future + flexibility. In order to promote a common configuration, + this document includes suggestions for default values for + IPv4 prefixes. Each of these values may be overridden if an + object is meaningful to the node. + + All prefixes used by this entity should be included in this + table independent of how the entity learned the prefix. + (This table isn't limited to prefixes learned from router + + + + advertisements.)" + ::= { ip 32 } + +ipAddressPrefixEntry OBJECT-TYPE + SYNTAX IpAddressPrefixEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the ipAddressPrefixTable." + INDEX { ipAddressPrefixIfIndex, ipAddressPrefixType, + ipAddressPrefixPrefix, ipAddressPrefixLength } + ::= { ipAddressPrefixTable 1 } + +IpAddressPrefixEntry ::= SEQUENCE { + ipAddressPrefixIfIndex InterfaceIndex, + ipAddressPrefixType InetAddressType, + ipAddressPrefixPrefix InetAddress, + ipAddressPrefixLength InetAddressPrefixLength, + ipAddressPrefixOrigin IpAddressPrefixOriginTC, + ipAddressPrefixOnLinkFlag TruthValue, + ipAddressPrefixAutonomousFlag TruthValue, + ipAddressPrefixAdvPreferredLifetime Unsigned32, + ipAddressPrefixAdvValidLifetime Unsigned32 + } + +ipAddressPrefixIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface on + which this prefix is configured. The interface identified + by a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipAddressPrefixEntry 1 } + +ipAddressPrefixType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of ipAddressPrefix." + ::= { ipAddressPrefixEntry 2 } + +ipAddressPrefixPrefix OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + + + + DESCRIPTION + "The address prefix. The address type of this object is + specified in ipAddressPrefixType. The length of this object + is the standard length for objects of that type (4 or 16 + bytes). Any bits after ipAddressPrefixLength must be zero. + + Implementors need to be aware that, if the size of + ipAddressPrefixPrefix exceeds 114 octets, then OIDS of + instances of columns in this row will have more than 128 + sub-identifiers and cannot be accessed using SNMPv1, + SNMPv2c, or SNMPv3." + ::= { ipAddressPrefixEntry 3 } + +ipAddressPrefixLength OBJECT-TYPE + SYNTAX InetAddressPrefixLength + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The prefix length associated with this prefix. + + The value 0 has no special meaning for this object. It + simply refers to address '::/0'." + ::= { ipAddressPrefixEntry 4 } + +ipAddressPrefixOrigin OBJECT-TYPE + SYNTAX IpAddressPrefixOriginTC + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The origin of this prefix." + ::= { ipAddressPrefixEntry 5 } + +ipAddressPrefixOnLinkFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object has the value 'true(1)', if this prefix can be + used for on-link determination; otherwise, the value is + 'false(2)'. + + The default for IPv4 prefixes is 'true(1)'." + REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and + RFC 2462" + ::= { ipAddressPrefixEntry 6 } + +ipAddressPrefixAutonomousFlag OBJECT-TYPE + SYNTAX TruthValue + + + + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Autonomous address configuration flag. When true(1), + indicates that this prefix can be used for autonomous + address configuration (i.e., can be used to form a local + interface address). If false(2), it is not used to auto- + configure a local interface address. + + The default for IPv4 prefixes is 'false(2)'." + REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and + RFC 2462" + ::= { ipAddressPrefixEntry 7 } + +ipAddressPrefixAdvPreferredLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remaining length of time, in seconds, that this prefix + will continue to be preferred, i.e., time until deprecation. + + A value of 4,294,967,295 represents infinity. + + The address generated from a deprecated prefix should no + longer be used as a source address in new communications, + but packets received on such an interface are processed as + expected. + + The default for IPv4 prefixes is 4,294,967,295 (infinity)." + REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and + RFC 2462" + ::= { ipAddressPrefixEntry 8 } + +ipAddressPrefixAdvValidLifetime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remaining length of time, in seconds, that this prefix + will continue to be valid, i.e., time until invalidation. A + value of 4,294,967,295 represents infinity. + + The address generated from an invalidated prefix should not + appear as the destination or source address of a packet. + + + + + The default for IPv4 prefixes is 4,294,967,295 (infinity)." + REFERENCE "For IPv6 RFC 2461, especially sections 2 and 4.6.2 and + RFC 2462" + ::= { ipAddressPrefixEntry 9 } + +-- +-- Internet Address Table +-- + +ipAddressSpinLock OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An advisory lock used to allow cooperating SNMP managers to + coordinate their use of the set operation in creating or + modifying rows within this table. + + In order to use this lock to coordinate the use of set + operations, managers should first retrieve + ipAddressTableSpinLock. They should then determine the + appropriate row to create or modify. Finally, they should + issue the appropriate set command, including the retrieved + value of ipAddressSpinLock. If another manager has altered + the table in the meantime, then the value of + ipAddressSpinLock will have changed, and the creation will + fail as it will be specifying an incorrect value for + ipAddressSpinLock. It is suggested, but not required, that + the ipAddressSpinLock be the first var bind for each set of + objects representing a 'row' in a PDU." + ::= { ip 33 } + +ipAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains addressing information relevant to the + entity's interfaces. + + This table does not contain multicast address information. + Tables for such information should be contained in multicast + specific MIBs, such as RFC 3019. + + While this table is writable, the user will note that + several objects, such as ipAddressOrigin, are not. The + intention in allowing a user to write to this table is to + allow them to add or remove any entry that isn't + + + + permanent. The user should be allowed to modify objects + and entries when that would not cause inconsistencies + within the table. Allowing write access to objects, such + as ipAddressOrigin, could allow a user to insert an entry + and then label it incorrectly. + + Note well: When including IPv6 link-local addresses in this + table, the entry must use an InetAddressType of 'ipv6z' in + order to differentiate between the possible interfaces." + ::= { ip 34 } + +ipAddressEntry OBJECT-TYPE + SYNTAX IpAddressEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An address mapping for a particular interface." + INDEX { ipAddressAddrType, ipAddressAddr } + ::= { ipAddressTable 1 } + +IpAddressEntry ::= SEQUENCE { + ipAddressAddrType InetAddressType, + ipAddressAddr InetAddress, + ipAddressIfIndex InterfaceIndex, + ipAddressType INTEGER, + ipAddressPrefix RowPointer, + ipAddressOrigin IpAddressOriginTC, + ipAddressStatus IpAddressStatusTC, + ipAddressCreated TimeStamp, + ipAddressLastChanged TimeStamp, + ipAddressRowStatus RowStatus, + ipAddressStorageType StorageType + } + +ipAddressAddrType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of ipAddressAddr." + ::= { ipAddressEntry 1 } + +ipAddressAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP address to which this entry's addressing information + + + + pertains. The address type of this object is specified in + ipAddressAddrType. + + Implementors need to be aware that if the size of + ipAddressAddr exceeds 116 octets, then OIDS of instances of + columns in this row will have more than 128 sub-identifiers + and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." + ::= { ipAddressEntry 2 } + +ipAddressIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipAddressEntry 3 } + +ipAddressType OBJECT-TYPE + SYNTAX INTEGER { + unicast(1), + anycast(2), + broadcast(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of address. broadcast(3) is not a valid value for + IPv6 addresses (RFC 3513)." + DEFVAL { unicast } + ::= { ipAddressEntry 4 } + +ipAddressPrefix OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A pointer to the row in the prefix table to which this + address belongs. May be { 0 0 } if there is no such row." + DEFVAL { zeroDotZero } + ::= { ipAddressEntry 5 } + +ipAddressOrigin OBJECT-TYPE + SYNTAX IpAddressOriginTC + MAX-ACCESS read-only + STATUS current + + + + DESCRIPTION + "The origin of the address." + ::= { ipAddressEntry 6 } + +ipAddressStatus OBJECT-TYPE + SYNTAX IpAddressStatusTC + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of the address, describing if the address can be + used for communication. + + In the absence of other information, an IPv4 address is + always preferred(1)." + DEFVAL { preferred } + ::= { ipAddressEntry 7 } + +ipAddressCreated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry was created. + If this entry was created prior to the last re- + initialization of the local network management subsystem, + then this object contains a zero value." + ::= { ipAddressEntry 8 } + +ipAddressLastChanged OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry was last + updated. If this entry was updated prior to the last re- + initialization of the local network management subsystem, + then this object contains a zero value." + ::= { ipAddressEntry 9 } + +ipAddressRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + The RowStatus TC requires that this DESCRIPTION clause + states under which circumstances other objects in this row + + + + can be modified. The value of this object has no effect on + whether other objects in this conceptual row can be + modified. + + A conceptual row can not be made active until the + ipAddressIfIndex has been set to a valid index." + ::= { ipAddressEntry 10 } + +ipAddressStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. If this object + has a value of 'permanent', then no other objects are + required to be able to be modified." + DEFVAL { volatile } + ::= { ipAddressEntry 11 } + +-- +-- the Internet Address Translation table +-- + +ipNetToPhysicalTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpNetToPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address Translation table used for mapping from IP + addresses to physical addresses. + + The Address Translation tables contain the IP address to + 'physical' address equivalences. Some interfaces do not use + translation tables for determining address equivalences + (e.g., DDN-X.25 has an algorithmic method); if all + interfaces are of this type, then the Address Translation + table is empty, i.e., has zero entries. + + While many protocols may be used to populate this table, ARP + and Neighbor Discovery are the most likely + options." + REFERENCE "RFC 826 and RFC 2461" + ::= { ip 35 } + +ipNetToPhysicalEntry OBJECT-TYPE + SYNTAX IpNetToPhysicalEntry + MAX-ACCESS not-accessible + STATUS current + + + + DESCRIPTION + "Each entry contains one IP address to `physical' address + equivalence." + INDEX { ipNetToPhysicalIfIndex, + ipNetToPhysicalNetAddressType, + ipNetToPhysicalNetAddress } + ::= { ipNetToPhysicalTable 1 } + +IpNetToPhysicalEntry ::= SEQUENCE { + ipNetToPhysicalIfIndex InterfaceIndex, + ipNetToPhysicalNetAddressType InetAddressType, + ipNetToPhysicalNetAddress InetAddress, + ipNetToPhysicalPhysAddress PhysAddress, + ipNetToPhysicalLastUpdated TimeStamp, + ipNetToPhysicalType INTEGER, + ipNetToPhysicalState INTEGER, + ipNetToPhysicalRowStatus RowStatus + } + +ipNetToPhysicalIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipNetToPhysicalEntry 1 } + +ipNetToPhysicalNetAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The type of ipNetToPhysicalNetAddress." + ::= { ipNetToPhysicalEntry 2 } + +ipNetToPhysicalNetAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP Address corresponding to the media-dependent + `physical' address. The address type of this object is + specified in ipNetToPhysicalAddressType. + + Implementors need to be aware that if the size of + + + + ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of + instances of columns in this row will have more than 128 + sub-identifiers and cannot be accessed using SNMPv1, + SNMPv2c, or SNMPv3." + ::= { ipNetToPhysicalEntry 3 } + +ipNetToPhysicalPhysAddress OBJECT-TYPE + SYNTAX PhysAddress (SIZE(0..65535)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The media-dependent `physical' address. + + As the entries in this table are typically not persistent + when this object is written the entity SHOULD NOT save the + change to non-volatile storage." + ::= { ipNetToPhysicalEntry 4 } + +ipNetToPhysicalLastUpdated OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time this entry was last + updated. If this entry was updated prior to the last re- + initialization of the local network management subsystem, + then this object contains a zero value." + ::= { ipNetToPhysicalEntry 5 } + +ipNetToPhysicalType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + invalid(2), -- an invalidated mapping + dynamic(3), + static(4), + local(5) -- local interface + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type of mapping. + + Setting this object to the value invalid(2) has the effect + of invalidating the corresponding entry in the + ipNetToPhysicalTable. That is, it effectively dis- + associates the interface identified with said entry from the + mapping identified with said entry. It is an + implementation-specific matter as to whether the agent + + + + removes an invalidated entry from the table. Accordingly, + management stations must be prepared to receive tabular + information from agents that corresponds to entries not + currently in use. Proper interpretation of such entries + requires examination of the relevant ipNetToPhysicalType + object. + + The 'dynamic(3)' type indicates that the IP address to + physical addresses mapping has been dynamically resolved + using e.g., IPv4 ARP or the IPv6 Neighbor Discovery + protocol. + + The 'static(4)' type indicates that the mapping has been + statically configured. Both of these refer to entries that + provide mappings for other entities addresses. + + The 'local(5)' type indicates that the mapping is provided + for an entity's own interface address. + + As the entries in this table are typically not persistent + when this object is written the entity SHOULD NOT save the + change to non-volatile storage." + DEFVAL { static } + ::= { ipNetToPhysicalEntry 6 } + +ipNetToPhysicalState OBJECT-TYPE + SYNTAX INTEGER { + reachable(1), -- confirmed reachability + + stale(2), -- unconfirmed reachability + + delay(3), -- waiting for reachability + -- confirmation before entering + -- the probe state + + probe(4), -- actively probing + + invalid(5), -- an invalidated mapping + + unknown(6), -- state can not be determined + -- for some reason. + + incomplete(7) -- address resolution is being + -- performed. + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + + "The Neighbor Unreachability Detection state for the + interface when the address mapping in this entry is used. + If Neighbor Unreachability Detection is not in use (e.g. for + IPv4), this object is always unknown(6)." + REFERENCE "RFC 2461" + ::= { ipNetToPhysicalEntry 7 } + +ipNetToPhysicalRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + The RowStatus TC requires that this DESCRIPTION clause + states under which circumstances other objects in this row + can be modified. The value of this object has no effect on + whether other objects in this conceptual row can be + modified. + + A conceptual row can not be made active until the + ipNetToPhysicalPhysAddress object has been set. + + Note that if the ipNetToPhysicalType is set to 'invalid', + the managed node may delete the entry independent of the + state of this object." + ::= { ipNetToPhysicalEntry 8 } + +-- +-- The IPv6 Scope Zone Index Table. +-- + +ipv6ScopeZoneIndexTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6ScopeZoneIndexEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table used to describe IPv6 unicast and multicast scope + zones. + + For those objects that have names rather than numbers, the + names were chosen to coincide with the names used in the + IPv6 address architecture document. " + REFERENCE "Section 2.7 of RFC 4291" + ::= { ip 36 } + +ipv6ScopeZoneIndexEntry OBJECT-TYPE + SYNTAX Ipv6ScopeZoneIndexEntry + + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains the list of scope identifiers on a given + interface." + INDEX { ipv6ScopeZoneIndexIfIndex } + ::= { ipv6ScopeZoneIndexTable 1 } + +Ipv6ScopeZoneIndexEntry ::= SEQUENCE { + ipv6ScopeZoneIndexIfIndex InterfaceIndex, + ipv6ScopeZoneIndexLinkLocal InetZoneIndex, + ipv6ScopeZoneIndex3 InetZoneIndex, + ipv6ScopeZoneIndexAdminLocal InetZoneIndex, + ipv6ScopeZoneIndexSiteLocal InetZoneIndex, + ipv6ScopeZoneIndex6 InetZoneIndex, + ipv6ScopeZoneIndex7 InetZoneIndex, + ipv6ScopeZoneIndexOrganizationLocal InetZoneIndex, + ipv6ScopeZoneIndex9 InetZoneIndex, + ipv6ScopeZoneIndexA InetZoneIndex, + ipv6ScopeZoneIndexB InetZoneIndex, + ipv6ScopeZoneIndexC InetZoneIndex, + ipv6ScopeZoneIndexD InetZoneIndex + } + +ipv6ScopeZoneIndexIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface to + which these scopes belong. The interface identified by a + particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipv6ScopeZoneIndexEntry 1 } + +ipv6ScopeZoneIndexLinkLocal OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for the link-local scope on this interface." + ::= { ipv6ScopeZoneIndexEntry 2 } + +ipv6ScopeZoneIndex3 OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + + + + "The zone index for scope 3 on this interface." + ::= { ipv6ScopeZoneIndexEntry 3 } + +ipv6ScopeZoneIndexAdminLocal OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for the admin-local scope on this interface." + ::= { ipv6ScopeZoneIndexEntry 4 } + +ipv6ScopeZoneIndexSiteLocal OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for the site-local scope on this interface." + ::= { ipv6ScopeZoneIndexEntry 5 } + +ipv6ScopeZoneIndex6 OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope 6 on this interface." + ::= { ipv6ScopeZoneIndexEntry 6 } + +ipv6ScopeZoneIndex7 OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope 7 on this interface." + ::= { ipv6ScopeZoneIndexEntry 7 } + +ipv6ScopeZoneIndexOrganizationLocal OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for the organization-local scope on this + interface." + ::= { ipv6ScopeZoneIndexEntry 8 } + +ipv6ScopeZoneIndex9 OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + + + + DESCRIPTION + "The zone index for scope 9 on this interface." + ::= { ipv6ScopeZoneIndexEntry 9 } + +ipv6ScopeZoneIndexA OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope A on this interface." + ::= { ipv6ScopeZoneIndexEntry 10 } + +ipv6ScopeZoneIndexB OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope B on this interface." + ::= { ipv6ScopeZoneIndexEntry 11 } + +ipv6ScopeZoneIndexC OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope C on this interface." + ::= { ipv6ScopeZoneIndexEntry 12 } + +ipv6ScopeZoneIndexD OBJECT-TYPE + SYNTAX InetZoneIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The zone index for scope D on this interface." + ::= { ipv6ScopeZoneIndexEntry 13 } + +-- +-- The Default Router Table +-- This table simply lists the default routers; for more information +-- about routing tables, see the routing MIBs +-- + +ipDefaultRouterTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpDefaultRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table used to describe the default routers known to this + + + + entity." + ::= { ip 37 } + +ipDefaultRouterEntry OBJECT-TYPE + SYNTAX IpDefaultRouterEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry contains information about a default router known + to this entity." + INDEX {ipDefaultRouterAddressType, ipDefaultRouterAddress, + ipDefaultRouterIfIndex} + ::= { ipDefaultRouterTable 1 } + +IpDefaultRouterEntry ::= SEQUENCE { + ipDefaultRouterAddressType InetAddressType, + ipDefaultRouterAddress InetAddress, + ipDefaultRouterIfIndex InterfaceIndex, + ipDefaultRouterLifetime Unsigned32, + ipDefaultRouterPreference INTEGER + } + +ipDefaultRouterAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type for this row." + ::= { ipDefaultRouterEntry 1 } + +ipDefaultRouterAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP address of the default router represented by this + row. The address type of this object is specified in + ipDefaultRouterAddressType. + + Implementers need to be aware that if the size of + ipDefaultRouterAddress exceeds 115 octets, then OIDS of + instances of columns in this row will have more than 128 + sub-identifiers and cannot be accessed using SNMPv1, + SNMPv2c, or SNMPv3." + ::= { ipDefaultRouterEntry 2 } + +ipDefaultRouterIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + + + + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface by + which the router can be reached. The interface identified + by a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipDefaultRouterEntry 3 } + +ipDefaultRouterLifetime OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The remaining length of time, in seconds, that this router + will continue to be useful as a default router. A value of + zero indicates that it is no longer useful as a default + router. It is left to the implementer of the MIB as to + whether a router with a lifetime of zero is removed from the + list. + + For IPv6, this value should be extracted from the router + advertisement messages." + REFERENCE "For IPv6 RFC 2462 sections 4.2 and 6.3.4" + ::= { ipDefaultRouterEntry 4 } + +ipDefaultRouterPreference OBJECT-TYPE + SYNTAX INTEGER { + reserved (-2), + low (-1), + medium (0), + high (1) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An indication of preference given to this router as a + default router as described in he Default Router + Preferences document. Treating the value as a + 2 bit signed integer allows for simple arithmetic + comparisons. + + For IPv4 routers or IPv6 routers that are not using the + updated router advertisement format, this object is set to + medium (0)." + REFERENCE "RFC 4291, section 2.1" + ::= { ipDefaultRouterEntry 5 } + + + +-- +-- Configuration information for constructing router advertisements +-- + +ipv6RouterAdvertSpinLock OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "An advisory lock used to allow cooperating SNMP managers to + coordinate their use of the set operation in creating or + modifying rows within this table. + + In order to use this lock to coordinate the use of set + operations, managers should first retrieve + ipv6RouterAdvertSpinLock. They should then determine the + appropriate row to create or modify. Finally, they should + issue the appropriate set command including the retrieved + value of ipv6RouterAdvertSpinLock. If another manager has + altered the table in the meantime, then the value of + ipv6RouterAdvertSpinLock will have changed and the creation + will fail as it will be specifying an incorrect value for + ipv6RouterAdvertSpinLock. It is suggested, but not + required, that the ipv6RouterAdvertSpinLock be the first var + bind for each set of objects representing a 'row' in a PDU." + ::= { ip 38 } + +ipv6RouterAdvertTable OBJECT-TYPE + SYNTAX SEQUENCE OF Ipv6RouterAdvertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table containing information used to construct router + advertisements." + ::= { ip 39 } + +ipv6RouterAdvertEntry OBJECT-TYPE + SYNTAX Ipv6RouterAdvertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing information used to construct router + advertisements. + + Information in this table is persistent, and when this + object is written, the entity SHOULD save the change to + non-volatile storage." + INDEX { ipv6RouterAdvertIfIndex } + + + + ::= { ipv6RouterAdvertTable 1 } + +Ipv6RouterAdvertEntry ::= SEQUENCE { + ipv6RouterAdvertIfIndex InterfaceIndex, + ipv6RouterAdvertSendAdverts TruthValue, + ipv6RouterAdvertMaxInterval Unsigned32, + ipv6RouterAdvertMinInterval Unsigned32, + ipv6RouterAdvertManagedFlag TruthValue, + ipv6RouterAdvertOtherConfigFlag TruthValue, + ipv6RouterAdvertLinkMTU Unsigned32, + ipv6RouterAdvertReachableTime Unsigned32, + ipv6RouterAdvertRetransmitTime Unsigned32, + ipv6RouterAdvertCurHopLimit Unsigned32, + ipv6RouterAdvertDefaultLifetime Unsigned32, + ipv6RouterAdvertRowStatus RowStatus + } + +ipv6RouterAdvertIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value that uniquely identifies the interface on + which router advertisements constructed with this + information will be transmitted. The interface identified + by a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipv6RouterAdvertEntry 1 } + +ipv6RouterAdvertSendAdverts OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A flag indicating whether the router sends periodic + router advertisements and responds to router solicitations + on this interface." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { false } + ::= { ipv6RouterAdvertEntry 2 } + +ipv6RouterAdvertMaxInterval OBJECT-TYPE + SYNTAX Unsigned32 (4..1800) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum time allowed between sending unsolicited router + + + + advertisements from this interface." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { 600 } + ::= { ipv6RouterAdvertEntry 3 } + +ipv6RouterAdvertMinInterval OBJECT-TYPE + SYNTAX Unsigned32 (3..1350) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The minimum time allowed between sending unsolicited router + advertisements from this interface. + + The default is 0.33 * ipv6RouterAdvertMaxInterval, however, + in the case of a low value for ipv6RouterAdvertMaxInterval, + the minimum value for this object is restricted to 3." + REFERENCE "RFC 2461 Section 6.2.1" + ::= { ipv6RouterAdvertEntry 4 } + +ipv6RouterAdvertManagedFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The true/false value to be placed into the 'managed address + configuration' flag field in router advertisements sent from + this interface." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { false } + ::= { ipv6RouterAdvertEntry 5 } + +ipv6RouterAdvertOtherConfigFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The true/false value to be placed into the 'other stateful + configuration' flag field in router advertisements sent from + this interface." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { false } + ::= { ipv6RouterAdvertEntry 6 } + +ipv6RouterAdvertLinkMTU OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-create + STATUS current + + + + DESCRIPTION + "The value to be placed in MTU options sent by the router on + this interface. + + A value of zero indicates that no MTU options are sent." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { 0 } + ::= { ipv6RouterAdvertEntry 7 } + +ipv6RouterAdvertReachableTime OBJECT-TYPE + SYNTAX Unsigned32 (0..3600000) + UNITS "milliseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value to be placed in the reachable time field in router + advertisement messages sent from this interface. + + A value of zero in the router advertisement indicates that + the advertisement isn't specifying a value for reachable + time." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { 0 } + ::= { ipv6RouterAdvertEntry 8 } + +ipv6RouterAdvertRetransmitTime OBJECT-TYPE + SYNTAX Unsigned32 + UNITS "milliseconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value to be placed in the retransmit timer field in + router advertisements sent from this interface. + + A value of zero in the router advertisement indicates that + the advertisement isn't specifying a value for retrans + time." + REFERENCE "RFC 2461 Section 6.2.1" + DEFVAL { 0 } + ::= { ipv6RouterAdvertEntry 9 } + +ipv6RouterAdvertCurHopLimit OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default value to be placed in the current hop limit + field in router advertisements sent from this interface. + + + + The value should be set to the current diameter of the + Internet. + + A value of zero in the router advertisement indicates that + the advertisement isn't specifying a value for curHopLimit. + + The default should be set to the value specified in the IANA + web pages (www.iana.org) at the time of implementation." + REFERENCE "RFC 2461 Section 6.2.1" + ::= { ipv6RouterAdvertEntry 10 } + +ipv6RouterAdvertDefaultLifetime OBJECT-TYPE + SYNTAX Unsigned32 (0|4..9000) + UNITS "seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value to be placed in the router lifetime field of + router advertisements sent from this interface. This value + MUST be either 0 or between ipv6RouterAdvertMaxInterval and + 9000 seconds. + + A value of zero indicates that the router is not to be used + as a default router. + + The default is 3 * ipv6RouterAdvertMaxInterval." + REFERENCE "RFC 2461 Section 6.2.1" + ::= { ipv6RouterAdvertEntry 11 } + +ipv6RouterAdvertRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + As all objects in this conceptual row have default values, a + row can be created and made active by setting this object + appropriately. + + The RowStatus TC requires that this DESCRIPTION clause + states under which circumstances other objects in this row + can be modified. The value of this object has no effect on + whether other objects in this conceptual row can be + modified." + ::= { ipv6RouterAdvertEntry 12 } + +-- + + + +-- ICMP section +-- + +icmp OBJECT IDENTIFIER ::= { mib-2 5 } + +-- +-- ICMP non-message-specific counters +-- + +-- These object IDs are reserved, as they were used in earlier +-- versions of the MIB module. In theory, OIDs are not assigned +-- until the specification is released as an RFC; however, as some +-- companies may have shipped code based on earlier versions of +-- the MIB, it seems best to reserve these OIDs. +-- ::= { icmp 27 } +-- ::= { icmp 28 } + +icmpStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IcmpStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of generic system-wide ICMP counters." + ::= { icmp 29 } + +icmpStatsEntry OBJECT-TYPE + SYNTAX IcmpStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the icmpStatsTable." + INDEX { icmpStatsIPVersion } + ::= { icmpStatsTable 1 } + +IcmpStatsEntry ::= SEQUENCE { + icmpStatsIPVersion InetVersion, + icmpStatsInMsgs Counter32, + icmpStatsInErrors Counter32, + icmpStatsOutMsgs Counter32, + icmpStatsOutErrors Counter32 + } + +icmpStatsIPVersion OBJECT-TYPE + SYNTAX InetVersion + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP version of the statistics." + + + + ::= { icmpStatsEntry 1 } + +icmpStatsInMsgs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of ICMP messages that the entity received. + Note that this counter includes all those counted by + icmpStatsInErrors." + ::= { icmpStatsEntry 2 } + +icmpStatsInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ICMP messages that the entity received but + determined as having ICMP-specific errors (bad ICMP + checksums, bad length, etc.)." + ::= { icmpStatsEntry 3 } + +icmpStatsOutMsgs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of ICMP messages that the entity attempted + to send. Note that this counter includes all those counted + by icmpStatsOutErrors." + ::= { icmpStatsEntry 4 } + +icmpStatsOutErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ICMP messages that this entity did not send + due to problems discovered within ICMP, such as a lack of + buffers. This value should not include errors discovered + outside the ICMP layer, such as the inability of IP to route + the resultant datagram. In some implementations, there may + be no types of error that contribute to this counter's + value." + ::= { icmpStatsEntry 5 } + +-- +-- per-version, per-message type ICMP counters + + + +-- + +icmpMsgStatsTable OBJECT-TYPE + SYNTAX SEQUENCE OF IcmpMsgStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of system-wide per-version, per-message type ICMP + counters." + ::= { icmp 30 } + +icmpMsgStatsEntry OBJECT-TYPE + SYNTAX IcmpMsgStatsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual row in the icmpMsgStatsTable. + + The system should track each ICMP type value, even if that + ICMP type is not supported by the system. However, a + given row need not be instantiated unless a message of that + type has been processed, i.e., the row for + icmpMsgStatsType=X MAY be instantiated before but MUST be + instantiated after the first message with Type=X is + received or transmitted. After receiving or transmitting + any succeeding messages with Type=X, the relevant counter + must be incremented." + INDEX { icmpMsgStatsIPVersion, icmpMsgStatsType } + ::= { icmpMsgStatsTable 1 } + +IcmpMsgStatsEntry ::= SEQUENCE { + icmpMsgStatsIPVersion InetVersion, + icmpMsgStatsType Integer32, + icmpMsgStatsInPkts Counter32, + icmpMsgStatsOutPkts Counter32 + } + +icmpMsgStatsIPVersion OBJECT-TYPE + SYNTAX InetVersion + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The IP version of the statistics." + ::= { icmpMsgStatsEntry 1 } + +icmpMsgStatsType OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS not-accessible + + + + STATUS current + DESCRIPTION + "The ICMP type field of the message type being counted by + this row. + + Note that ICMP message types are scoped by the address type + in use." + REFERENCE "http://www.iana.org/assignments/icmp-parameters and + http://www.iana.org/assignments/icmpv6-parameters" + ::= { icmpMsgStatsEntry 2 } + +icmpMsgStatsInPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of input packets for this AF and type." + ::= { icmpMsgStatsEntry 3 } + +icmpMsgStatsOutPkts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of output packets for this AF and type." + ::= { icmpMsgStatsEntry 4 } +-- +-- conformance information +-- + +ipMIBConformance OBJECT IDENTIFIER ::= { ipMIB 2 } + +ipMIBCompliances OBJECT IDENTIFIER ::= { ipMIBConformance 1 } +ipMIBGroups OBJECT IDENTIFIER ::= { ipMIBConformance 2 } + +-- compliance statements +ipMIBCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for systems that implement IP - + either IPv4 or IPv6. + + There are a number of INDEX objects that cannot be + represented in the form of OBJECT clauses in SMIv2, but + for which we have the following compliance requirements, + expressed in OBJECT clause form in this description + clause: + + + + + -- OBJECT ipSystemStatsIPVersion + -- SYNTAX InetVersion {ipv4(1), ipv6(2)} + -- DESCRIPTION + -- This MIB requires support for only IPv4 and IPv6 + -- versions. + -- + -- OBJECT ipIfStatsIPVersion + -- SYNTAX InetVersion {ipv4(1), ipv6(2)} + -- DESCRIPTION + -- This MIB requires support for only IPv4 and IPv6 + -- versions. + -- + -- OBJECT icmpStatsIPVersion + -- SYNTAX InetVersion {ipv4(1), ipv6(2)} + -- DESCRIPTION + -- This MIB requires support for only IPv4 and IPv6 + -- versions. + -- + -- OBJECT icmpMsgStatsIPVersion + -- SYNTAX InetVersion {ipv4(1), ipv6(2)} + -- DESCRIPTION + -- This MIB requires support for only IPv4 and IPv6 + -- versions. + -- + -- OBJECT ipAddressPrefixType + -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} + -- DESCRIPTION + -- This MIB requires support for only global IPv4 and + -- IPv6 address types. + -- + -- OBJECT ipAddressPrefixPrefix + -- SYNTAX InetAddress (Size(4 | 16)) + -- DESCRIPTION + -- This MIB requires support for only global IPv4 and + -- IPv6 addresses and so the size can be either 4 or + -- 16 bytes. + -- + -- OBJECT ipAddressAddrType + -- SYNTAX InetAddressType {ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)} + -- DESCRIPTION + -- This MIB requires support for only global and + -- non-global IPv4 and IPv6 address types. + -- + -- OBJECT ipAddressAddr + -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for only global and + + + + -- non-global IPv4 and IPv6 addresses and so the size + -- can be 4, 8, 16, or 20 bytes. + -- + -- OBJECT ipNetToPhysicalNetAddressType + -- SYNTAX InetAddressType {ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)} + -- DESCRIPTION + -- This MIB requires support for only global and + -- non-global IPv4 and IPv6 address types. + -- + -- OBJECT ipNetToPhysicalNetAddress + -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for only global and + -- non-global IPv4 and IPv6 addresses and so the size + -- can be 4, 8, 16, or 20 bytes. + -- + -- OBJECT ipDefaultRouterAddressType + -- SYNTAX InetAddressType {ipv4(1), ipv6(2), + -- ipv4z(3), ipv6z(4)} + -- DESCRIPTION + -- This MIB requires support for only global and + -- non-global IPv4 and IPv6 address types. + -- + -- OBJECT ipDefaultRouterAddress + -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) + -- DESCRIPTION + -- This MIB requires support for only global and + -- non-global IPv4 and IPv6 addresses and so the size + -- can be 4, 8, 16, or 20 bytes." +" + MODULE -- this module + + MANDATORY-GROUPS { ipSystemStatsGroup, ipAddressGroup, + ipNetToPhysicalGroup, ipDefaultRouterGroup, + icmpStatsGroup } + + GROUP ipSystemStatsHCOctetGroup + DESCRIPTION + "This group is mandatory for systems that have an aggregate + bandwidth of greater than 20MB. Including this group does + not allow an entity to neglect the 32 bit versions of these + objects." + + GROUP ipSystemStatsHCPacketGroup + DESCRIPTION + "This group is mandatory for systems that have an aggregate + bandwidth of greater than 650MB. Including this group + + + + does not allow an entity to neglect the 32 bit versions of + these objects." + + GROUP ipIfStatsGroup + DESCRIPTION + "This group is optional for all systems." + + GROUP ipIfStatsHCOctetGroup + DESCRIPTION + "This group is mandatory for systems that include the + ipIfStatsGroup and include links with bandwidths of greater + than 20MB. Including this group does not allow an entity to + neglect the 32 bit versions of these objects." + + GROUP ipIfStatsHCPacketGroup + DESCRIPTION + "This group is mandatory for systems that include the + ipIfStatsGroup and include links with bandwidths of greater + than 650MB. Including this group does not allow an entity + to neglect the 32 bit versions of these objects." + + GROUP ipv4GeneralGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4." + + GROUP ipv4IfGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4." + + GROUP ipv4SystemStatsGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4." + + GROUP ipv4SystemStatsHCPacketGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4 and + that have an aggregate bandwidth of greater than 650MB. + Including this group does not allow an entity to neglect the + 32 bit versions of these objects." + + GROUP ipv4IfStatsGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4 and + including the ipIfStatsGroup." + + GROUP ipv4IfStatsHCPacketGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv4 and + + + + including the ipIfStatsHCPacketGroup. Including this group + does not allow an entity to neglect the 32 bit versions of + these objects." + + GROUP ipv6GeneralGroup2 + DESCRIPTION + "This group is mandatory for all systems supporting IPv6." + + GROUP ipv6IfGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv6." + + GROUP ipAddressPrefixGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv6." + + GROUP ipv6ScopeGroup + DESCRIPTION + "This group is mandatory for all systems supporting IPv6." + + GROUP ipv6RouterAdvertGroup + DESCRIPTION + "This group is mandatory for all IPv6 routers." + + GROUP ipLastChangeGroup + DESCRIPTION + "This group is optional for all agents." + + OBJECT ipv6IpForwarding + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6IpDefaultHopLimit + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv4InterfaceEnableStatus + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6InterfaceEnableStatus + MIN-ACCESS read-only + + + + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6InterfaceForwarding + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipAddressSpinLock + MIN-ACCESS not-accessible + DESCRIPTION + "An agent is not required to provide write access to this + object. However, if an agent provides write access to any + of the other objects in the ipAddressGroup, it SHOULD + provide write access to this object as well." + + OBJECT ipAddressIfIndex + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipAddressType + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipAddressStatus + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipAddressRowStatus + SYNTAX RowStatus { active(1) } + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipAddressStorageType + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object. + + + + If an agent allows this object to be written or created, it + is not required to allow this object to be set to readOnly, + permanent, or nonVolatile." + + OBJECT ipNetToPhysicalPhysAddress + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipNetToPhysicalType + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + OBJECT ipv6RouterAdvertSpinLock + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object. However, if an agent provides write access to + any of the other objects in the ipv6RouterAdvertGroup, it + SHOULD provide write access to this object as well." + + OBJECT ipv6RouterAdvertSendAdverts + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertMaxInterval + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertMinInterval + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertManagedFlag + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + + + + OBJECT ipv6RouterAdvertOtherConfigFlag + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertLinkMTU + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertReachableTime + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertRetransmitTime + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertCurHopLimit + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertDefaultLifetime + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write access to this + object." + + OBJECT ipv6RouterAdvertRowStatus + MIN-ACCESS read-only + DESCRIPTION + "An agent is not required to provide write or create access + to this object." + + ::= { ipMIBCompliances 2 } + +-- units of conformance + +ipv4GeneralGroup OBJECT-GROUP + OBJECTS { ipForwarding, ipDefaultTTL, ipReasmTimeout } + + + + STATUS current + DESCRIPTION + "The group of IPv4-specific objects for basic management of + IPv4 entities." + ::= { ipMIBGroups 3 } + +ipv4IfGroup OBJECT-GROUP + OBJECTS { ipv4InterfaceReasmMaxSize, ipv4InterfaceEnableStatus, + ipv4InterfaceRetransmitTime } + STATUS current + DESCRIPTION + "The group of IPv4-specific objects for basic management of + IPv4 interfaces." + ::= { ipMIBGroups 4 } + +ipv6GeneralGroup2 OBJECT-GROUP + OBJECTS { ipv6IpForwarding, ipv6IpDefaultHopLimit } + STATUS current + DESCRIPTION + "The IPv6 group of objects providing for basic management of + IPv6 entities." + ::= { ipMIBGroups 5 } + +ipv6IfGroup OBJECT-GROUP + OBJECTS { ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, + ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, + ipv6InterfaceRetransmitTime, ipv6InterfaceForwarding } + STATUS current + DESCRIPTION + "The group of IPv6-specific objects for basic management of + IPv6 interfaces." + ::= { ipMIBGroups 6 } + +ipLastChangeGroup OBJECT-GROUP + OBJECTS { ipv4InterfaceTableLastChange, + ipv6InterfaceTableLastChange, + ipIfStatsTableLastChange } + STATUS current + DESCRIPTION + "The last change objects associated with this MIB. These + objects are optional for all agents. They SHOULD be + implemented on agents where it is possible to determine the + proper values. Where it is not possible to determine the + proper values, for example when the tables are split amongst + several sub-agents using AgentX, the agent MUST NOT + implement these objects to return an incorrect or static + value." + ::= { ipMIBGroups 7 } + + + +ipSystemStatsGroup OBJECT-GROUP + OBJECTS { ipSystemStatsInReceives, + ipSystemStatsInOctets, + ipSystemStatsInHdrErrors, + ipSystemStatsInNoRoutes, + ipSystemStatsInAddrErrors, + ipSystemStatsInUnknownProtos, + ipSystemStatsInTruncatedPkts, + ipSystemStatsInForwDatagrams, + ipSystemStatsReasmReqds, + ipSystemStatsReasmOKs, + ipSystemStatsReasmFails, + ipSystemStatsInDiscards, + ipSystemStatsInDelivers, + ipSystemStatsOutRequests, + ipSystemStatsOutNoRoutes, + ipSystemStatsOutForwDatagrams, + ipSystemStatsOutDiscards, + ipSystemStatsOutFragReqds, + ipSystemStatsOutFragOKs, + ipSystemStatsOutFragFails, + ipSystemStatsOutFragCreates, + ipSystemStatsOutTransmits, + ipSystemStatsOutOctets, + ipSystemStatsInMcastPkts, + ipSystemStatsInMcastOctets, + ipSystemStatsOutMcastPkts, + ipSystemStatsOutMcastOctets, + ipSystemStatsDiscontinuityTime, + ipSystemStatsRefreshRate } + STATUS current + DESCRIPTION + "IP system wide statistics." + ::= { ipMIBGroups 8 } + +ipv4SystemStatsGroup OBJECT-GROUP + OBJECTS { ipSystemStatsInBcastPkts, ipSystemStatsOutBcastPkts } + STATUS current + DESCRIPTION + "IPv4 only system wide statistics." + ::= { ipMIBGroups 9 } + +ipSystemStatsHCOctetGroup OBJECT-GROUP + OBJECTS { ipSystemStatsHCInOctets, + ipSystemStatsHCOutOctets, + ipSystemStatsHCInMcastOctets, + ipSystemStatsHCOutMcastOctets +} + + + + STATUS current + DESCRIPTION + "IP system wide statistics for systems that may overflow the + standard octet counters within 1 hour." + ::= { ipMIBGroups 10 } + +ipSystemStatsHCPacketGroup OBJECT-GROUP + OBJECTS { ipSystemStatsHCInReceives, + ipSystemStatsHCInForwDatagrams, + ipSystemStatsHCInDelivers, + ipSystemStatsHCOutRequests, + ipSystemStatsHCOutForwDatagrams, + ipSystemStatsHCOutTransmits, + ipSystemStatsHCInMcastPkts, + ipSystemStatsHCOutMcastPkts +} + STATUS current + DESCRIPTION + "IP system wide statistics for systems that may overflow the + standard packet counters within 1 hour." + ::= { ipMIBGroups 11 } + +ipv4SystemStatsHCPacketGroup OBJECT-GROUP + OBJECTS { ipSystemStatsHCInBcastPkts, + ipSystemStatsHCOutBcastPkts } + STATUS current + DESCRIPTION + "IPv4 only system wide statistics for systems that may + overflow the standard packet counters within 1 hour." + ::= { ipMIBGroups 12 } + +ipIfStatsGroup OBJECT-GROUP + OBJECTS { ipIfStatsInReceives, ipIfStatsInOctets, + ipIfStatsInHdrErrors, ipIfStatsInNoRoutes, + ipIfStatsInAddrErrors, ipIfStatsInUnknownProtos, + ipIfStatsInTruncatedPkts, ipIfStatsInForwDatagrams, + ipIfStatsReasmReqds, ipIfStatsReasmOKs, + ipIfStatsReasmFails, ipIfStatsInDiscards, + ipIfStatsInDelivers, ipIfStatsOutRequests, + ipIfStatsOutForwDatagrams, ipIfStatsOutDiscards, + ipIfStatsOutFragReqds, ipIfStatsOutFragOKs, + ipIfStatsOutFragFails, ipIfStatsOutFragCreates, + ipIfStatsOutTransmits, ipIfStatsOutOctets, + ipIfStatsInMcastPkts, ipIfStatsInMcastOctets, + ipIfStatsOutMcastPkts, ipIfStatsOutMcastOctets, + ipIfStatsDiscontinuityTime, ipIfStatsRefreshRate } + STATUS current + DESCRIPTION + + + + "IP per-interface statistics." + ::= { ipMIBGroups 13 } + +ipv4IfStatsGroup OBJECT-GROUP + OBJECTS { ipIfStatsInBcastPkts, ipIfStatsOutBcastPkts } + STATUS current + DESCRIPTION + "IPv4 only per-interface statistics." + ::= { ipMIBGroups 14 } + +ipIfStatsHCOctetGroup OBJECT-GROUP + OBJECTS { ipIfStatsHCInOctets, ipIfStatsHCOutOctets, + ipIfStatsHCInMcastOctets, ipIfStatsHCOutMcastOctets } + STATUS current + DESCRIPTION + "IP per-interfaces statistics for systems that include + interfaces that may overflow the standard octet + counters within 1 hour." + ::= { ipMIBGroups 15 } + +ipIfStatsHCPacketGroup OBJECT-GROUP + OBJECTS { ipIfStatsHCInReceives, ipIfStatsHCInForwDatagrams, + ipIfStatsHCInDelivers, ipIfStatsHCOutRequests, + ipIfStatsHCOutForwDatagrams, ipIfStatsHCOutTransmits, + ipIfStatsHCInMcastPkts, ipIfStatsHCOutMcastPkts } + STATUS current + DESCRIPTION + "IP per-interfaces statistics for systems that include + interfaces that may overflow the standard packet counters + within 1 hour." + ::= { ipMIBGroups 16 } + +ipv4IfStatsHCPacketGroup OBJECT-GROUP + OBJECTS { ipIfStatsHCInBcastPkts, ipIfStatsHCOutBcastPkts } + STATUS current + DESCRIPTION + "IPv4 only per-interface statistics for systems that include + interfaces that may overflow the standard packet counters + within 1 hour." + ::= { ipMIBGroups 17 } + +ipAddressPrefixGroup OBJECT-GROUP + OBJECTS { ipAddressPrefixOrigin, + ipAddressPrefixOnLinkFlag, + ipAddressPrefixAutonomousFlag, + ipAddressPrefixAdvPreferredLifetime, + ipAddressPrefixAdvValidLifetime } + STATUS current + + + + DESCRIPTION + "The group of objects for providing information about address + prefixes used by this node." + ::= { ipMIBGroups 18 } + +ipAddressGroup OBJECT-GROUP + OBJECTS { ipAddressSpinLock, ipAddressIfIndex, + ipAddressType, ipAddressPrefix, + ipAddressOrigin, ipAddressStatus, + ipAddressCreated, ipAddressLastChanged, + ipAddressRowStatus, ipAddressStorageType } + STATUS current + DESCRIPTION + "The group of objects for providing information about the + addresses relevant to this entity's interfaces." + ::= { ipMIBGroups 19 } + +ipNetToPhysicalGroup OBJECT-GROUP + OBJECTS { ipNetToPhysicalPhysAddress, ipNetToPhysicalLastUpdated, + ipNetToPhysicalType, ipNetToPhysicalState, + ipNetToPhysicalRowStatus } + STATUS current + DESCRIPTION + "The group of objects for providing information about the + mappings of network address to physical address known to + this node." + ::= { ipMIBGroups 20 } + +ipv6ScopeGroup OBJECT-GROUP + OBJECTS { ipv6ScopeZoneIndexLinkLocal, + ipv6ScopeZoneIndex3, + ipv6ScopeZoneIndexAdminLocal, + ipv6ScopeZoneIndexSiteLocal, + ipv6ScopeZoneIndex6, + ipv6ScopeZoneIndex7, + ipv6ScopeZoneIndexOrganizationLocal, + ipv6ScopeZoneIndex9, + ipv6ScopeZoneIndexA, + ipv6ScopeZoneIndexB, + ipv6ScopeZoneIndexC, + ipv6ScopeZoneIndexD } + STATUS current + DESCRIPTION + "The group of objects for managing IPv6 scope zones." + ::= { ipMIBGroups 21 } + +ipDefaultRouterGroup OBJECT-GROUP + OBJECTS { ipDefaultRouterLifetime, ipDefaultRouterPreference } + + + + STATUS current + DESCRIPTION + "The group of objects for providing information about default + routers known to this node." + ::= { ipMIBGroups 22 } + +ipv6RouterAdvertGroup OBJECT-GROUP + OBJECTS { ipv6RouterAdvertSpinLock, + ipv6RouterAdvertSendAdverts, + ipv6RouterAdvertMaxInterval, + ipv6RouterAdvertMinInterval, + ipv6RouterAdvertManagedFlag, + ipv6RouterAdvertOtherConfigFlag, + ipv6RouterAdvertLinkMTU, + ipv6RouterAdvertReachableTime, + ipv6RouterAdvertRetransmitTime, + ipv6RouterAdvertCurHopLimit, + ipv6RouterAdvertDefaultLifetime, + ipv6RouterAdvertRowStatus +} + STATUS current + DESCRIPTION + "The group of objects for controlling information advertised + by IPv6 routers." + ::= { ipMIBGroups 23 } + +icmpStatsGroup OBJECT-GROUP + OBJECTS {icmpStatsInMsgs, icmpStatsInErrors, + icmpStatsOutMsgs, icmpStatsOutErrors, + icmpMsgStatsInPkts, icmpMsgStatsOutPkts } + STATUS current + DESCRIPTION + "The group of objects providing ICMP statistics." + ::= { ipMIBGroups 24 } + +-- +-- Deprecated objects +-- + +ipInReceives OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of input datagrams received from + interfaces, including those received in error. + + This object has been deprecated, as a new IP version-neutral + + + + table has been added. It is loosely replaced by + ipSystemStatsInRecieves." + ::= { ip 3 } + +ipInHdrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of input datagrams discarded due to errors in + their IPv4 headers, including bad checksums, version number + mismatch, other format errors, time-to-live exceeded, errors + discovered in processing their IPv4 options, etc. + + This object has been deprecated as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsInHdrErrors." + ::= { ip 4 } + +ipInAddrErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of input datagrams discarded because the IPv4 + address in their IPv4 header's destination field was not a + valid address to be received at this entity. This count + includes invalid addresses (e.g., 0.0.0.0) and addresses of + unsupported Classes (e.g., Class E). For entities which are + not IPv4 routers, and therefore do not forward datagrams, + this counter includes datagrams discarded because the + destination address was not a local address. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsInAddrErrors." + ::= { ip 5 } + +ipForwDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of input datagrams for which this entity was not + their final IPv4 destination, as a result of which an + attempt was made to find a route to forward them to that + final destination. In entities which do not act as IPv4 + routers, this counter will include only those packets which + + + + were Source-Routed via this entity, and the Source-Route + option processing was successful. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsInForwDatagrams." + ::= { ip 6 } + +ipInUnknownProtos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of locally-addressed datagrams received + successfully but discarded because of an unknown or + unsupported protocol. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsInUnknownProtos." + ::= { ip 7 } + +ipInDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of input IPv4 datagrams for which no problems + were encountered to prevent their continued processing, but + which were discarded (e.g., for lack of buffer space). Note + that this counter does not include any datagrams discarded + while awaiting re-assembly. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsInDiscards." + ::= { ip 8 } + +ipInDelivers OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of input datagrams successfully delivered + to IPv4 user-protocols (including ICMP). + + This object has been deprecated as a new IP version neutral + table has been added. It is loosely replaced by + + + + ipSystemStatsIndelivers." + ::= { ip 9 } + +ipOutRequests OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of IPv4 datagrams which local IPv4 user + protocols (including ICMP) supplied to IPv4 in requests for + transmission. Note that this counter does not include any + datagrams counted in ipForwDatagrams. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsOutRequests." + ::= { ip 10 } + +ipOutDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of output IPv4 datagrams for which no problem was + encountered to prevent their transmission to their + destination, but which were discarded (e.g., for lack of + buffer space). Note that this counter would include + datagrams counted in ipForwDatagrams if any such packets met + this (discretionary) discard criterion. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsOutDiscards." + ::= { ip 11 } + +ipOutNoRoutes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 datagrams discarded because no route + could be found to transmit them to their destination. Note + that this counter includes any packets counted in + ipForwDatagrams which meet this `no-route' criterion. Note + that this includes any datagrams which a host cannot route + because all of its default routers are down. + + This object has been deprecated, as a new IP version-neutral + + + + table has been added. It is loosely replaced by + ipSystemStatsOutNoRoutes." + ::= { ip 12 } + +ipReasmReqds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 fragments received which needed to be + reassembled at this entity. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsReasmReqds." + ::= { ip 14 } + +ipReasmOKs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 datagrams successfully re-assembled. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsReasmOKs." + ::= { ip 15 } + +ipReasmFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of failures detected by the IPv4 re-assembly + algorithm (for whatever reason: timed out, errors, etc). + Note that this is not necessarily a count of discarded IPv4 + fragments since some algorithms (notably the algorithm in + RFC 815) can lose track of the number of fragments by + combining them as they are received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsReasmFails." + ::= { ip 16 } + +ipFragOKs OBJECT-TYPE + SYNTAX Counter32 + + + + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 datagrams that have been successfully + fragmented at this entity. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsOutFragOKs." + ::= { ip 17 } + +ipFragFails OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 datagrams that have been discarded + because they needed to be fragmented at this entity but + could not be, e.g., because their Don't Fragment flag was + set. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + ipSystemStatsOutFragFails." + ::= { ip 18 } + +ipFragCreates OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of IPv4 datagram fragments that have been + generated as a result of fragmentation at this entity. + + This object has been deprecated as a new IP version neutral + table has been added. It is loosely replaced by + ipSystemStatsOutFragCreates." + ::= { ip 19 } + +ipRoutingDiscards OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of routing entries which were chosen to be + discarded even though they are valid. One possible reason + for discarding such an entry could be to free-up buffer + space for other routing entries. + + + + This object was defined in pre-IPv6 versions of the IP MIB. + It was implicitly IPv4 only, but the original specifications + did not indicate this protocol restriction. In order to + clarify the specifications, this object has been deprecated + and a similar, but more thoroughly clarified, object has + been added to the IP-FORWARD-MIB." + ::= { ip 23 } + +-- the deprecated IPv4 address table + +ipAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpAddrEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "The table of addressing information relevant to this + entity's IPv4 addresses. + + This table has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by the + ipAddressTable although several objects that weren't deemed + useful weren't carried forward while another + (ipAdEntReasmMaxSize) was moved to the ipv4InterfaceTable." + ::= { ip 20 } + +ipAddrEntry OBJECT-TYPE + SYNTAX IpAddrEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "The addressing information for one of this entity's IPv4 + addresses." + INDEX { ipAdEntAddr } + ::= { ipAddrTable 1 } + +IpAddrEntry ::= SEQUENCE { + ipAdEntAddr IpAddress, + ipAdEntIfIndex INTEGER, + ipAdEntNetMask IpAddress, + ipAdEntBcastAddr INTEGER, + ipAdEntReasmMaxSize INTEGER + } + +ipAdEntAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + + + + "The IPv4 address to which this entry's addressing + information pertains." + ::= { ipAddrEntry 1 } + +ipAdEntIfIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The index value which uniquely identifies the interface to + which this entry is applicable. The interface identified by + a particular value of this index is the same interface as + identified by the same value of the IF-MIB's ifIndex." + ::= { ipAddrEntry 2 } + +ipAdEntNetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The subnet mask associated with the IPv4 address of this + entry. The value of the mask is an IPv4 address with all + the network bits set to 1 and all the hosts bits set to 0." + ::= { ipAddrEntry 3 } + +ipAdEntBcastAddr OBJECT-TYPE + SYNTAX INTEGER (0..1) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The value of the least-significant bit in the IPv4 broadcast + address used for sending datagrams on the (logical) + interface associated with the IPv4 address of this entry. + For example, when the Internet standard all-ones broadcast + address is used, the value will be 1. This value applies to + both the subnet and network broadcast addresses used by the + entity on this (logical) interface." + ::= { ipAddrEntry 4 } + +ipAdEntReasmMaxSize OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The size of the largest IPv4 datagram which this entity can + re-assemble from incoming IPv4 fragmented datagrams received + on this interface." + ::= { ipAddrEntry 5 } + + + +-- the deprecated IPv4 Address Translation table + +-- The Address Translation tables contain the IpAddress to +-- "physical" address equivalences. Some interfaces do not +-- use translation tables for determining address +-- equivalences (e.g., DDN-X.25 has an algorithmic method); +-- if all interfaces are of this type, then the Address +-- Translation table is empty, i.e., has zero entries. + +ipNetToMediaTable OBJECT-TYPE + SYNTAX SEQUENCE OF IpNetToMediaEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "The IPv4 Address Translation table used for mapping from + IPv4 addresses to physical addresses. + + This table has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by the + ipNetToPhysicalTable." + ::= { ip 22 } + +ipNetToMediaEntry OBJECT-TYPE + SYNTAX IpNetToMediaEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Each entry contains one IpAddress to `physical' address + equivalence." + INDEX { ipNetToMediaIfIndex, + ipNetToMediaNetAddress } + ::= { ipNetToMediaTable 1 } + +IpNetToMediaEntry ::= SEQUENCE { + ipNetToMediaIfIndex INTEGER, + ipNetToMediaPhysAddress PhysAddress, + ipNetToMediaNetAddress IpAddress, + ipNetToMediaType INTEGER + } + +ipNetToMediaIfIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The interface on which this entry's equivalence is + effective. The interface identified by a particular value + of this index is the same interface as identified by the + + + + same value of the IF-MIB's ifIndex. + + This object predates the rule limiting index objects to a + max access value of 'not-accessible' and so continues to use + a value of 'read-create'." + ::= { ipNetToMediaEntry 1 } + +ipNetToMediaPhysAddress OBJECT-TYPE + SYNTAX PhysAddress (SIZE(0..65535)) + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The media-dependent `physical' address. This object should + return 0 when this entry is in the 'incomplete' state. + + As the entries in this table are typically not persistent + when this object is written the entity should not save the + change to non-volatile storage. Note: a stronger + requirement is not used because this object was previously + defined." + ::= { ipNetToMediaEntry 2 } + +ipNetToMediaNetAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The IpAddress corresponding to the media-dependent + `physical' address. + + This object predates the rule limiting index objects to a + max access value of 'not-accessible' and so continues to use + a value of 'read-create'." + ::= { ipNetToMediaEntry 3 } + +ipNetToMediaType OBJECT-TYPE + SYNTAX INTEGER { + other(1), -- none of the following + invalid(2), -- an invalidated mapping + dynamic(3), + static(4) + } + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "The type of mapping. + + Setting this object to the value invalid(2) has the effect + + + + of invalidating the corresponding entry in the + ipNetToMediaTable. That is, it effectively dis-associates + the interface identified with said entry from the mapping + identified with said entry. It is an implementation- + specific matter as to whether the agent removes an + invalidated entry from the table. Accordingly, management + stations must be prepared to receive tabular information + from agents that corresponds to entries not currently in + use. Proper interpretation of such entries requires + examination of the relevant ipNetToMediaType object. + + As the entries in this table are typically not persistent + when this object is written the entity should not save the + change to non-volatile storage. Note: a stronger + requirement is not used because this object was previously + defined." + ::= { ipNetToMediaEntry 4 } + +-- the deprecated ICMP group + +icmpInMsgs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of ICMP messages which the entity received. + Note that this counter includes all those counted by + icmpInErrors. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + icmpStatsInMsgs." + ::= { icmp 1 } + +icmpInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP messages which the entity received but + determined as having ICMP-specific errors (bad ICMP + checksums, bad length, etc.). + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + icmpStatsInErrors." + ::= { icmp 2 } + + + + +icmpInDestUnreachs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Destination Unreachable messages + received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 3 } + +icmpInTimeExcds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Time Exceeded messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 4 } + +icmpInParmProbs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Parameter Problem messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 5 } + +icmpInSrcQuenchs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Source Quench messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 6 } + + + +icmpInRedirects OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Redirect messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 7 } + +icmpInEchos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Echo (request) messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 8 } + +icmpInEchoReps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Echo Reply messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 9 } + +icmpInTimestamps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Timestamp (request) messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 10 } + + + + +icmpInTimestampReps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Timestamp Reply messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 11 } + +icmpInAddrMasks OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Address Mask Request messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 12 } + +icmpInAddrMaskReps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Address Mask Reply messages received. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 13 } + +icmpOutMsgs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The total number of ICMP messages which this entity + attempted to send. Note that this counter includes all + those counted by icmpOutErrors. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + icmpStatsOutMsgs." + + + + ::= { icmp 14 } + +icmpOutErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP messages which this entity did not send + due to problems discovered within ICMP, such as a lack of + buffers. This value should not include errors discovered + outside the ICMP layer, such as the inability of IP to route + the resultant datagram. In some implementations, there may + be no types of error which contribute to this counter's + value. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by + icmpStatsOutErrors." + ::= { icmp 15 } + +icmpOutDestUnreachs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Destination Unreachable messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 16 } + +icmpOutTimeExcds OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Time Exceeded messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 17 } + +icmpOutParmProbs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + + + + DESCRIPTION + "The number of ICMP Parameter Problem messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 18 } + +icmpOutSrcQuenchs OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Source Quench messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 19 } + +icmpOutRedirects OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Redirect messages sent. For a host, this + object will always be zero, since hosts do not send + redirects. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 20 } + +icmpOutEchos OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Echo (request) messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 21 } + +icmpOutEchoReps OBJECT-TYPE + SYNTAX Counter32 + + + + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Echo Reply messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 22 } + +icmpOutTimestamps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Timestamp (request) messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 23 } + +icmpOutTimestampReps OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Timestamp Reply messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 24 } + +icmpOutAddrMasks OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Address Mask Request messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 25 } + +icmpOutAddrMaskReps OBJECT-TYPE + SYNTAX Counter32 + + + + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The number of ICMP Address Mask Reply messages sent. + + This object has been deprecated, as a new IP version-neutral + table has been added. It is loosely replaced by a column in + the icmpMsgStatsTable." + ::= { icmp 26 } + +-- deprecated conformance information +-- deprecated compliance statements + +ipMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for systems that implement only + IPv4. For version-independence, this compliance statement + is deprecated in favor of ipMIBCompliance2." + MODULE -- this module + MANDATORY-GROUPS { ipGroup, + icmpGroup } + ::= { ipMIBCompliances 1 } + +-- deprecated units of conformance + +ipGroup OBJECT-GROUP + OBJECTS { ipForwarding, ipDefaultTTL, + ipInReceives, ipInHdrErrors, + ipInAddrErrors, ipForwDatagrams, + ipInUnknownProtos, ipInDiscards, + ipInDelivers, ipOutRequests, + ipOutDiscards, ipOutNoRoutes, + ipReasmTimeout, ipReasmReqds, + ipReasmOKs, ipReasmFails, + ipFragOKs, ipFragFails, + ipFragCreates, ipAdEntAddr, + ipAdEntIfIndex, ipAdEntNetMask, + ipAdEntBcastAddr, ipAdEntReasmMaxSize, + ipNetToMediaIfIndex, ipNetToMediaPhysAddress, + ipNetToMediaNetAddress, ipNetToMediaType, + ipRoutingDiscards +} + STATUS deprecated + DESCRIPTION + "The ip group of objects providing for basic management of IP + entities, exclusive of the management of IP routes. + + + + + As part of the version independence, this group has been + deprecated. " + ::= { ipMIBGroups 1 } + +icmpGroup OBJECT-GROUP + OBJECTS { icmpInMsgs, icmpInErrors, + icmpInDestUnreachs, icmpInTimeExcds, + icmpInParmProbs, icmpInSrcQuenchs, + icmpInRedirects, icmpInEchos, + icmpInEchoReps, icmpInTimestamps, + icmpInTimestampReps, icmpInAddrMasks, + icmpInAddrMaskReps, icmpOutMsgs, + icmpOutErrors, icmpOutDestUnreachs, + icmpOutTimeExcds, icmpOutParmProbs, + icmpOutSrcQuenchs, icmpOutRedirects, + icmpOutEchos, icmpOutEchoReps, + icmpOutTimestamps, icmpOutTimestampReps, + icmpOutAddrMasks, icmpOutAddrMaskReps } + STATUS deprecated + DESCRIPTION + "The icmp group of objects providing ICMP statistics. + + As part of the version independence, this group has been + deprecated. " + ::= { ipMIBGroups 2 } + +END

Added: trunk/mibs/SNMP-FRAMEWORK-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/SNMP-FRAMEWORK-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,526 @@ +SNMP-FRAMEWORK-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + OBJECT-IDENTITY, + snmpModules FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; + +snmpFrameworkMIB MODULE-IDENTITY + LAST-UPDATED "200210140000Z" + ORGANIZATION "SNMPv3 Working Group" + CONTACT-INFO "WG-EMail: snmpv3@lists.tislabs.com + Subscribe: snmpv3-request@lists.tislabs.com + + Co-Chair: Russ Mundy + Network Associates Laboratories + postal: 15204 Omega Drive, Suite 300 + Rockville, MD 20850-4601 + USA + EMail: mundy@tislabs.com + phone: +1 301-947-7107 + + Co-Chair & + Co-editor: David Harrington + Enterasys Networks + postal: 35 Industrial Way + P. O. Box 5005 + Rochester, New Hampshire 03866-5005 + USA + EMail: dbh@enterasys.com + phone: +1 603-337-2614 + + Co-editor: Randy Presuhn + BMC Software, Inc. + postal: 2141 North First Street + San Jose, California 95131 + USA + EMail: randy_presuhn@bmc.com + phone: +1 408-546-1006 + + Co-editor: Bert Wijnen + Lucent Technologies + postal: Schagen 33 + 3461 GL Linschoten + Netherlands + + EMail: bwijnen@lucent.com + phone: +31 348-680-485 + " + DESCRIPTION "The SNMP Management Architecture MIB + + Copyright (C) The Internet Society (2002). This + version of this MIB module is part of RFC 3411; + see the RFC itself for full legal notices. + " + + REVISION "200210140000Z" -- 14 October 2002 + DESCRIPTION "Changes in this revision: + - Updated various administrative information. + - Corrected some typos. + - Corrected typo in description of SnmpEngineID + that led to range overlap for 127. + - Changed '255a' to '255t' in definition of + SnmpAdminString to align with current SMI. + - Reworded 'reserved' for value zero in + DESCRIPTION of SnmpSecurityModel. + - The algorithm for allocating security models + should give 256 per enterprise block, rather + than 255. + - The example engine ID of 'abcd' is not + legal. Replaced with '800002b804616263'H based + on example enterprise 696, string 'abc'. + - Added clarification that engineID should + persist across re-initializations. + This revision published as RFC 3411. + " + REVISION "199901190000Z" -- 19 January 1999 + DESCRIPTION "Updated editors' addresses, fixed typos. + Published as RFC 2571. + " + REVISION "199711200000Z" -- 20 November 1997 + DESCRIPTION "The initial version, published in RFC 2271. + " + ::= { snmpModules 10 } + + -- Textual Conventions used in the SNMP Management Architecture *** + +SnmpEngineID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An SNMP engine's administratively-unique identifier. + Objects of this type are for identification, not for + addressing, even though it is possible that an + address may have been used in the generation of + a specific value. + + The value for this object may not be all zeros or + all 'ff'H or the empty (zero length) string. + + The initial value for this object may be configured + via an operator console entry or via an algorithmic + function. In the latter case, the following + example algorithm is recommended. + + In cases where there are multiple engines on the + same system, the use of this algorithm is NOT + appropriate, as it would result in all of those + engines ending up with the same ID value. + + 1) The very first bit is used to indicate how the + rest of the data is composed. + + 0 - as defined by enterprise using former methods + that existed before SNMPv3. See item 2 below. + + 1 - as defined by this architecture, see item 3 + below. + + Note that this allows existing uses of the + engineID (also known as AgentID [RFC1910]) to + co-exist with any new uses. + + 2) The snmpEngineID has a length of 12 octets. + + The first four octets are set to the binary + equivalent of the agent's SNMP management + private enterprise number as assigned by the + Internet Assigned Numbers Authority (IANA). + For example, if Acme Networks has been assigned + { enterprises 696 }, the first four octets would + be assigned '000002b8'H. + + The remaining eight octets are determined via + one or more enterprise-specific methods. Such + methods must be designed so as to maximize the + possibility that the value of this object will + be unique in the agent's administrative domain. + For example, it may be the IP address of the SNMP + entity, or the MAC address of one of the + interfaces, with each address suitably padded + with random octets. If multiple methods are + defined, then it is recommended that the first + octet indicate the method being used and the + remaining octets be a function of the method. + + 3) The length of the octet string varies. + + The first four octets are set to the binary + equivalent of the agent's SNMP management + private enterprise number as assigned by the + Internet Assigned Numbers Authority (IANA). + For example, if Acme Networks has been assigned + { enterprises 696 }, the first four octets would + be assigned '000002b8'H. + + The very first bit is set to 1. For example, the + above value for Acme Networks now changes to be + '800002b8'H. + + The fifth octet indicates how the rest (6th and + following octets) are formatted. The values for + the fifth octet are: + + 0 - reserved, unused. + + 1 - IPv4 address (4 octets) + lowest non-special IP address + + 2 - IPv6 address (16 octets) + lowest non-special IP address + + 3 - MAC address (6 octets) + lowest IEEE MAC address, canonical + order + + 4 - Text, administratively assigned + Maximum remaining length 27 + + 5 - Octets, administratively assigned + Maximum remaining length 27 + + 6-127 - reserved, unused + + 128-255 - as defined by the enterprise + Maximum remaining length 27 + " + SYNTAX OCTET STRING (SIZE(5..32)) + +SnmpSecurityModel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An identifier that uniquely identifies a + Security Model of the Security Subsystem within + this SNMP Management Architecture. + + The values for securityModel are allocated as + follows: + + - The zero value does not identify any particular + security model. + + - Values between 1 and 255, inclusive, are reserved + for standards-track Security Models and are + managed by the Internet Assigned Numbers Authority + (IANA). + - Values greater than 255 are allocated to + enterprise-specific Security Models. An + enterprise-specific securityModel value is defined + to be: + + enterpriseID * 256 + security model within + enterprise + + For example, the fourth Security Model defined by + the enterprise whose enterpriseID is 1 would be + 259. + + This scheme for allocation of securityModel + values allows for a maximum of 255 standards- + based Security Models, and for a maximum of + 256 Security Models per enterprise. + + It is believed that the assignment of new + securityModel values will be rare in practice + because the larger the number of simultaneously + utilized Security Models, the larger the + chance that interoperability will suffer. + Consequently, it is believed that such a range + will be sufficient. In the unlikely event that + the standards committee finds this number to be + insufficient over time, an enterprise number + can be allocated to obtain an additional 256 + possible values. + + Note that the most significant bit must be zero; + hence, there are 23 bits allocated for various + organizations to design and define non-standard + + securityModels. This limits the ability to + define new proprietary implementations of Security + Models to the first 8,388,608 enterprises. + + It is worthwhile to note that, in its encoded + form, the securityModel value will normally + require only a single byte since, in practice, + the leftmost bits will be zero for most messages + and sign extension is suppressed by the encoding + rules. + + As of this writing, there are several values + of securityModel defined for use with SNMP or + reserved for use with supporting MIB objects. + They are as follows: + + 0 reserved for 'any' + 1 reserved for SNMPv1 + 2 reserved for SNMPv2c + 3 User-Based Security Model (USM) + " + SYNTAX INTEGER(0 .. 2147483647) + +SnmpMessageProcessingModel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "An identifier that uniquely identifies a Message + Processing Model of the Message Processing + Subsystem within this SNMP Management Architecture. + + The values for messageProcessingModel are + allocated as follows: + + - Values between 0 and 255, inclusive, are + reserved for standards-track Message Processing + Models and are managed by the Internet Assigned + Numbers Authority (IANA). + + - Values greater than 255 are allocated to + enterprise-specific Message Processing Models. + An enterprise messageProcessingModel value is + defined to be: + + enterpriseID * 256 + + messageProcessingModel within enterprise + + For example, the fourth Message Processing Model + defined by the enterprise whose enterpriseID + + is 1 would be 259. + + This scheme for allocating messageProcessingModel + values allows for a maximum of 255 standards- + based Message Processing Models, and for a + maximum of 256 Message Processing Models per + enterprise. + + It is believed that the assignment of new + messageProcessingModel values will be rare + in practice because the larger the number of + simultaneously utilized Message Processing Models, + the larger the chance that interoperability + will suffer. It is believed that such a range + will be sufficient. In the unlikely event that + the standards committee finds this number to be + insufficient over time, an enterprise number + can be allocated to obtain an additional 256 + possible values. + + Note that the most significant bit must be zero; + hence, there are 23 bits allocated for various + organizations to design and define non-standard + messageProcessingModels. This limits the ability + to define new proprietary implementations of + Message Processing Models to the first 8,388,608 + enterprises. + + It is worthwhile to note that, in its encoded + form, the messageProcessingModel value will + normally require only a single byte since, in + practice, the leftmost bits will be zero for + most messages and sign extension is suppressed + by the encoding rules. + + As of this writing, there are several values of + messageProcessingModel defined for use with SNMP. + They are as follows: + + 0 reserved for SNMPv1 + 1 reserved for SNMPv2c + 2 reserved for SNMPv2u and SNMPv2* + 3 reserved for SNMPv3 + " + SYNTAX INTEGER(0 .. 2147483647) + +SnmpSecurityLevel ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "A Level of Security at which SNMP messages can be + sent or with which operations are being processed; + in particular, one of: + + noAuthNoPriv - without authentication and + without privacy, + authNoPriv - with authentication but + without privacy, + authPriv - with authentication and + with privacy. + + These three values are ordered such that + noAuthNoPriv is less than authNoPriv and + authNoPriv is less than authPriv. + " + SYNTAX INTEGER { noAuthNoPriv(1), + authNoPriv(2), + authPriv(3) + } + +SnmpAdminString ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255t" + STATUS current + DESCRIPTION "An octet string containing administrative + information, preferably in human-readable form. + + To facilitate internationalization, this + information is represented using the ISO/IEC + IS 10646-1 character set, encoded as an octet + string using the UTF-8 transformation format + described in [RFC2279]. + + Since additional code points are added by + amendments to the 10646 standard from time + to time, implementations must be prepared to + encounter any code point from 0x00000000 to + 0x7fffffff. Byte sequences that do not + correspond to the valid UTF-8 encoding of a + code point or are outside this range are + prohibited. + + The use of control codes should be avoided. + + When it is necessary to represent a newline, + the control code sequence CR LF should be used. + + The use of leading or trailing white space should + be avoided. + + For code points not directly supported by user + interface hardware or software, an alternative + means of entry and display, such as hexadecimal, + may be provided. + + For information encoded in 7-bit US-ASCII, + the UTF-8 encoding is identical to the + US-ASCII encoding. + + UTF-8 may require multiple bytes to represent a + single character / code point; thus the length + of this object in octets may be different from + the number of characters encoded. Similarly, + size constraints refer to the number of encoded + octets, not the number of characters represented + by an encoding. + + Note that when this TC is used for an object that + is used or envisioned to be used as an index, then + a SIZE restriction MUST be specified so that the + number of sub-identifiers for any object instance + does not exceed the limit of 128, as defined by + [RFC3416]. + + Note that the size of an SnmpAdminString object is + measured in octets, not characters. + " + SYNTAX OCTET STRING (SIZE (0..255)) + +-- Administrative assignments *************************************** + +snmpFrameworkAdmin + OBJECT IDENTIFIER ::= { snmpFrameworkMIB 1 } +snmpFrameworkMIBObjects + OBJECT IDENTIFIER ::= { snmpFrameworkMIB 2 } +snmpFrameworkMIBConformance + OBJECT IDENTIFIER ::= { snmpFrameworkMIB 3 } + +-- the snmpEngine Group ******************************************** + +snmpEngine OBJECT IDENTIFIER ::= { snmpFrameworkMIBObjects 1 } + +snmpEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An SNMP engine's administratively-unique identifier. + + This information SHOULD be stored in non-volatile + storage so that it remains constant across + re-initializations of the SNMP engine. + " + ::= { snmpEngine 1 } + +snmpEngineBoots OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of times that the SNMP engine has + (re-)initialized itself since snmpEngineID + was last configured. + " + ::= { snmpEngine 2 } + +snmpEngineTime OBJECT-TYPE + SYNTAX INTEGER (0..2147483647) + UNITS "seconds" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The number of seconds since the value of + the snmpEngineBoots object last changed. + When incrementing this object's value would + cause it to exceed its maximum, + snmpEngineBoots is incremented as if a + re-initialization had occurred, and this + object's value consequently reverts to zero. + " + ::= { snmpEngine 3 } + +snmpEngineMaxMessageSize OBJECT-TYPE + SYNTAX INTEGER (484..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION "The maximum length in octets of an SNMP message + which this SNMP engine can send or receive and + process, determined as the minimum of the maximum + message size values supported among all of the + transports available to and supported by the engine. + " + ::= { snmpEngine 4 } + +-- Registration Points for Authentication and Privacy Protocols ** + +snmpAuthProtocols OBJECT-IDENTITY + STATUS current + DESCRIPTION "Registration point for standards-track + authentication protocols used in SNMP Management + Frameworks. + " + ::= { snmpFrameworkAdmin 1 } + +snmpPrivProtocols OBJECT-IDENTITY + STATUS current + DESCRIPTION "Registration point for standards-track privacy + protocols used in SNMP Management Frameworks. + " + ::= { snmpFrameworkAdmin 2 } + +-- Conformance information ****************************************** + +snmpFrameworkMIBCompliances + OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 1} +snmpFrameworkMIBGroups + OBJECT IDENTIFIER ::= {snmpFrameworkMIBConformance 2} + +-- compliance statements + +snmpFrameworkMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION "The compliance statement for SNMP engines which + implement the SNMP Management Framework MIB. + " + MODULE -- this module + MANDATORY-GROUPS { snmpEngineGroup } + ::= { snmpFrameworkMIBCompliances 1 } + +-- units of conformance + +snmpEngineGroup OBJECT-GROUP + OBJECTS { + snmpEngineID, + snmpEngineBoots, + snmpEngineTime, + snmpEngineMaxMessageSize + } + STATUS current + DESCRIPTION "A collection of objects for identifying and + determining the configuration and current timeliness + + values of an SNMP engine. + " + ::= { snmpFrameworkMIBGroups 1 } + +END

Added: trunk/mibs/SNMP-TARGET-MIB.txt ============================================================================== --- (empty file) +++ trunk/mibs/SNMP-TARGET-MIB.txt Mon Sep 24 14:47:30 2007 @@ -0,0 +1,660 @@ +SNMP-TARGET-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + snmpModules, + Counter32, + Integer32 + FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, + TDomain, + TAddress, + TimeInterval, + RowStatus, + StorageType, + TestAndIncr + FROM SNMPv2-TC + + SnmpSecurityModel, + SnmpMessageProcessingModel, + SnmpSecurityLevel, + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF; + +snmpTargetMIB MODULE-IDENTITY + LAST-UPDATED "200210140000Z" + ORGANIZATION "IETF SNMPv3 Working Group" + CONTACT-INFO + "WG-email: snmpv3@lists.tislabs.com + Subscribe: majordomo@lists.tislabs.com + In message body: subscribe snmpv3 + + Co-Chair: Russ Mundy + Network Associates Laboratories + Postal: 15204 Omega Drive, Suite 300 + Rockville, MD 20850-4601 + USA + EMail: mundy@tislabs.com + Phone: +1 301-947-7107 + + Co-Chair: David Harrington + Enterasys Networks + Postal: 35 Industrial Way + P. O. Box 5004 + Rochester, New Hampshire 03866-5005 + USA + EMail: dbh@enterasys.com + Phone: +1 603-337-2614 + + Co-editor: David B. Levi + Nortel Networks + Postal: 3505 Kesterwood Drive + Knoxville, Tennessee 37918 + EMail: dlevi@nortelnetworks.com + Phone: +1 865 686 0432 + + Co-editor: Paul Meyer + Secure Computing Corporation + Postal: 2675 Long Lake Road + + Roseville, Minnesota 55113 + EMail: paul_meyer@securecomputing.com + Phone: +1 651 628 1592 + + Co-editor: Bob Stewart + Retired" + DESCRIPTION + "This MIB module defines MIB objects which provide + mechanisms to remotely configure the parameters used + by an SNMP entity for the generation of SNMP messages. + + Copyright (C) The Internet Society (2002). This + version of this MIB module is part of RFC 3413; + see the RFC itself for full legal notices. + " + REVISION "200210140000Z" -- 14 October 2002 + DESCRIPTION "Fixed DISPLAY-HINTS for UTF-8 strings, fixed hex + value of LF characters, clarified meaning of zero + length tag values, improved tag list examples. + Published as RFC 3413." + REVISION "199808040000Z" -- 4 August 1998 + DESCRIPTION "Clarifications, published as + RFC 2573." + REVISION "199707140000Z" -- 14 July 1997 + DESCRIPTION "The initial revision, published as RFC2273." + ::= { snmpModules 12 } + +snmpTargetObjects OBJECT IDENTIFIER ::= { snmpTargetMIB 1 } +snmpTargetConformance OBJECT IDENTIFIER ::= { snmpTargetMIB 3 } + +SnmpTagValue ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255t" + STATUS current + DESCRIPTION + "An octet string containing a tag value. + Tag values are preferably in human-readable form. + + To facilitate internationalization, this information + is represented using the ISO/IEC IS 10646-1 character + set, encoded as an octet string using the UTF-8 + character encoding scheme described in RFC 2279. + + Since additional code points are added by amendments + to the 10646 standard from time to time, + implementations must be prepared to encounter any code + point from 0x00000000 to 0x7fffffff. + + The use of control codes should be avoided, and certain + + control codes are not allowed as described below. + + For code points not directly supported by user + interface hardware or software, an alternative means + of entry and display, such as hexadecimal, may be + provided. + + For information encoded in 7-bit US-ASCII, the UTF-8 + representation is identical to the US-ASCII encoding. + + Note that when this TC is used for an object that + is used or envisioned to be used as an index, then a + SIZE restriction must be specified so that the number + of sub-identifiers for any object instance does not + exceed the limit of 128, as defined by [RFC1905]. + + An object of this type contains a single tag value + which is used to select a set of entries in a table. + + A tag value is an arbitrary string of octets, but + may not contain a delimiter character. Delimiter + characters are defined to be one of the following: + + - An ASCII space character (0x20). + + - An ASCII TAB character (0x09). + + - An ASCII carriage return (CR) character (0x0D). + + - An ASCII line feed (LF) character (0x0A). + + Delimiter characters are used to separate tag values + in a tag list. An object of this type may only + contain a single tag value, and so delimiter + characters are not allowed in a value of this type. + + Note that a tag value of 0 length means that no tag is + defined. In other words, a tag value of 0 length would + never match anything in a tag list, and would never + select any table entries. + + Some examples of valid tag values are: + + - 'acme' + + - 'router' + + - 'host' + + The use of a tag value to select table entries is + application and MIB specific." + SYNTAX OCTET STRING (SIZE (0..255)) + +SnmpTagList ::= TEXTUAL-CONVENTION + DISPLAY-HINT "255t" + STATUS current + DESCRIPTION + "An octet string containing a list of tag values. + Tag values are preferably in human-readable form. + + To facilitate internationalization, this information + is represented using the ISO/IEC IS 10646-1 character + set, encoded as an octet string using the UTF-8 + character encoding scheme described in RFC 2279. + + Since additional code points are added by amendments + to the 10646 standard from time to time, + implementations must be prepared to encounter any code + point from 0x00000000 to 0x7fffffff. + + The use of control codes should be avoided, except as + described below. + + For code points not directly supported by user + interface hardware or software, an alternative means + of entry and display, such as hexadecimal, may be + provided. + + For information encoded in 7-bit US-ASCII, the UTF-8 + representation is identical to the US-ASCII encoding. + + An object of this type contains a list of tag values + which are used to select a set of entries in a table. + + A tag value is an arbitrary string of octets, but + may not contain a delimiter character. Delimiter + characters are defined to be one of the following: + + - An ASCII space character (0x20). + + - An ASCII TAB character (0x09). + + - An ASCII carriage return (CR) character (0x0D). + + - An ASCII line feed (LF) character (0x0A). + + Delimiter characters are used to separate tag values + + in a tag list. Only a single delimiter character may + occur between two tag values. A tag value may not + have a zero length. These constraints imply certain + restrictions on the contents of this object: + + - There cannot be a leading or trailing delimiter + character. + + - There cannot be multiple adjacent delimiter + characters. + + Some examples of valid tag lists are: + + - '' -- an empty list + + - 'acme' -- list of one tag + + - 'host router bridge' -- list of several tags + + Note that although a tag value may not have a length of + zero, an empty string is still valid. This indicates + an empty list (i.e. there are no tag values in the list). + + The use of the tag list to select table entries is + application and MIB specific. Typically, an application + will provide one or more tag values, and any entry + which contains some combination of these tag values + will be selected." + SYNTAX OCTET STRING (SIZE (0..255)) + +-- +-- +-- The snmpTargetObjects group +-- +-- + +snmpTargetSpinLock OBJECT-TYPE + SYNTAX TestAndIncr + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object is used to facilitate modification of table + entries in the SNMP-TARGET-MIB module by multiple + managers. In particular, it is useful when modifying + the value of the snmpTargetAddrTagList object. + + The procedure for modifying the snmpTargetAddrTagList + object is as follows: + + 1. Retrieve the value of snmpTargetSpinLock and + of snmpTargetAddrTagList. + + 2. Generate a new value for snmpTargetAddrTagList. + + 3. Set the value of snmpTargetSpinLock to the + retrieved value, and the value of + snmpTargetAddrTagList to the new value. If + the set fails for the snmpTargetSpinLock + object, go back to step 1." + ::= { snmpTargetObjects 1 } + +snmpTargetAddrTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpTargetAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of transport addresses to be used in the generation + of SNMP messages." + ::= { snmpTargetObjects 2 } + +snmpTargetAddrEntry OBJECT-TYPE + SYNTAX SnmpTargetAddrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A transport address to be used in the generation + of SNMP operations. + + Entries in the snmpTargetAddrTable are created and + deleted using the snmpTargetAddrRowStatus object." + INDEX { IMPLIED snmpTargetAddrName } + ::= { snmpTargetAddrTable 1 } + +SnmpTargetAddrEntry ::= SEQUENCE { + snmpTargetAddrName SnmpAdminString, + snmpTargetAddrTDomain TDomain, + snmpTargetAddrTAddress TAddress, + snmpTargetAddrTimeout TimeInterval, + snmpTargetAddrRetryCount Integer32, + snmpTargetAddrTagList SnmpTagList, + snmpTargetAddrParams SnmpAdminString, + snmpTargetAddrStorageType StorageType, + snmpTargetAddrRowStatus RowStatus +} + +snmpTargetAddrName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this snmpTargetAddrEntry." + ::= { snmpTargetAddrEntry 1 } + +snmpTargetAddrTDomain OBJECT-TYPE + SYNTAX TDomain + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object indicates the transport type of the address + contained in the snmpTargetAddrTAddress object." + ::= { snmpTargetAddrEntry 2 } + +snmpTargetAddrTAddress OBJECT-TYPE + SYNTAX TAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object contains a transport address. The format of + this address depends on the value of the + snmpTargetAddrTDomain object." + ::= { snmpTargetAddrEntry 3 } + +snmpTargetAddrTimeout OBJECT-TYPE + SYNTAX TimeInterval + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object should reflect the expected maximum round + trip time for communicating with the transport address + defined by this row. When a message is sent to this + address, and a response (if one is expected) is not + received within this time period, an implementation + may assume that the response will not be delivered. + + Note that the time interval that an application waits + for a response may actually be derived from the value + of this object. The method for deriving the actual time + interval is implementation dependent. One such method + is to derive the expected round trip time based on a + particular retransmission algorithm and on the number + of timeouts which have occurred. The type of message may + also be considered when deriving expected round trip + times for retransmissions. For example, if a message is + being sent with a securityLevel that indicates both + + authentication and privacy, the derived value may be + increased to compensate for extra processing time spent + during authentication and encryption processing." + DEFVAL { 1500 } + ::= { snmpTargetAddrEntry 4 } + +snmpTargetAddrRetryCount OBJECT-TYPE + SYNTAX Integer32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a default number of retries to be + attempted when a response is not received for a generated + message. An application may provide its own retry count, + in which case the value of this object is ignored." + DEFVAL { 3 } + ::= { snmpTargetAddrEntry 5 } + +snmpTargetAddrTagList OBJECT-TYPE + SYNTAX SnmpTagList + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object contains a list of tag values which are + used to select target addresses for a particular + operation." + DEFVAL { "" } + ::= { snmpTargetAddrEntry 6 } + +snmpTargetAddrParams OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object identifies an entry in the + snmpTargetParamsTable. The identified entry + contains SNMP parameters to be used when generating + messages to be sent to this transport address." + ::= { snmpTargetAddrEntry 7 } + +snmpTargetAddrStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. + Conceptual rows having the value 'permanent' need not + allow write-access to any columnar objects in the row." + DEFVAL { nonVolatile } + ::= { snmpTargetAddrEntry 8 } + +snmpTargetAddrRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + To create a row in this table, a manager must + set this object to either createAndGo(4) or + createAndWait(5). + + Until instances of all corresponding columns are + appropriately configured, the value of the + corresponding instance of the snmpTargetAddrRowStatus + column is 'notReady'. + + In particular, a newly created row cannot be made + active until the corresponding instances of + snmpTargetAddrTDomain, snmpTargetAddrTAddress, and + snmpTargetAddrParams have all been set. + + The following objects may not be modified while the + value of this object is active(1): + - snmpTargetAddrTDomain + - snmpTargetAddrTAddress + An attempt to set these objects while the value of + snmpTargetAddrRowStatus is active(1) will result in + an inconsistentValue error." + ::= { snmpTargetAddrEntry 9 } + +snmpTargetParamsTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpTargetParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of SNMP target information to be used + in the generation of SNMP messages." + ::= { snmpTargetObjects 3 } + +snmpTargetParamsEntry OBJECT-TYPE + SYNTAX SnmpTargetParamsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A set of SNMP target information. + + Entries in the snmpTargetParamsTable are created and + deleted using the snmpTargetParamsRowStatus object." + INDEX { IMPLIED snmpTargetParamsName } + ::= { snmpTargetParamsTable 1 } + +SnmpTargetParamsEntry ::= SEQUENCE { + snmpTargetParamsName SnmpAdminString, + snmpTargetParamsMPModel SnmpMessageProcessingModel, + snmpTargetParamsSecurityModel SnmpSecurityModel, + snmpTargetParamsSecurityName SnmpAdminString, + snmpTargetParamsSecurityLevel SnmpSecurityLevel, + snmpTargetParamsStorageType StorageType, + snmpTargetParamsRowStatus RowStatus +} + +snmpTargetParamsName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this snmpTargetParamsEntry." + ::= { snmpTargetParamsEntry 1 } + +snmpTargetParamsMPModel OBJECT-TYPE + SYNTAX SnmpMessageProcessingModel + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Message Processing Model to be used when generating + SNMP messages using this entry." + ::= { snmpTargetParamsEntry 2 } + +snmpTargetParamsSecurityModel OBJECT-TYPE + SYNTAX SnmpSecurityModel (1..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Security Model to be used when generating SNMP + messages using this entry. An implementation may + choose to return an inconsistentValue error if an + attempt is made to set this variable to a value + for a security model which the implementation does + not support." + ::= { snmpTargetParamsEntry 3 } + +snmpTargetParamsSecurityName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The securityName which identifies the Principal on + whose behalf SNMP messages will be generated using + this entry." + ::= { snmpTargetParamsEntry 4 } + +snmpTargetParamsSecurityLevel OBJECT-TYPE + SYNTAX SnmpSecurityLevel + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Level of Security to be used when generating + SNMP messages using this entry." + ::= { snmpTargetParamsEntry 5 } + +snmpTargetParamsStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row. + Conceptual rows having the value 'permanent' need not + allow write-access to any columnar objects in the row." + DEFVAL { nonVolatile } + ::= { snmpTargetParamsEntry 6 } + +snmpTargetParamsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row. + + To create a row in this table, a manager must + set this object to either createAndGo(4) or + createAndWait(5). + + Until instances of all corresponding columns are + appropriately configured, the value of the + corresponding instance of the snmpTargetParamsRowStatus + column is 'notReady'. + + In particular, a newly created row cannot be made + active until the corresponding + snmpTargetParamsMPModel, + snmpTargetParamsSecurityModel, + snmpTargetParamsSecurityName, + and snmpTargetParamsSecurityLevel have all been set. + + The following objects may not be modified while the + value of this object is active(1): + - snmpTargetParamsMPModel + - snmpTargetParamsSecurityModel + - snmpTargetParamsSecurityName + - snmpTargetParamsSecurityLevel + An attempt to set these objects while the value of + snmpTargetParamsRowStatus is active(1) will result in + an inconsistentValue error." + ::= { snmpTargetParamsEntry 7 } + +snmpUnavailableContexts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received by the SNMP + engine which were dropped because the context + contained in the message was unavailable." + ::= { snmpTargetObjects 4 } + +snmpUnknownContexts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of packets received by the SNMP + engine which were dropped because the context + contained in the message was unknown." + ::= { snmpTargetObjects 5 } + +-- +-- +-- Conformance information +-- +-- + +snmpTargetCompliances OBJECT IDENTIFIER ::= + { snmpTargetConformance 1 } +snmpTargetGroups OBJECT IDENTIFIER ::= + { snmpTargetConformance 2 } + +-- +-- +-- Compliance statements + +-- +-- + +snmpTargetCommandResponderCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which include + a command responder application." + MODULE -- This Module + MANDATORY-GROUPS { snmpTargetCommandResponderGroup } + ::= { snmpTargetCompliances 1 } + +snmpTargetBasicGroup OBJECT-GROUP + OBJECTS { + snmpTargetSpinLock, + snmpTargetAddrTDomain, + snmpTargetAddrTAddress, + snmpTargetAddrTagList, + snmpTargetAddrParams, + snmpTargetAddrStorageType, + snmpTargetAddrRowStatus, + snmpTargetParamsMPModel, + snmpTargetParamsSecurityModel, + snmpTargetParamsSecurityName, + snmpTargetParamsSecurityLevel, + snmpTargetParamsStorageType, + snmpTargetParamsRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects providing basic remote + configuration of management targets." + ::= { snmpTargetGroups 1 } + +snmpTargetResponseGroup OBJECT-GROUP + OBJECTS { + snmpTargetAddrTimeout, + snmpTargetAddrRetryCount + } + STATUS current + DESCRIPTION + "A collection of objects providing remote configuration + of management targets for applications which generate + SNMP messages for which a response message would be + expected." + ::= { snmpTargetGroups 2 } + +snmpTargetCommandResponderGroup OBJECT-GROUP + + OBJECTS { + snmpUnavailableContexts, + snmpUnknownContexts + } + STATUS current + DESCRIPTION + "A collection of objects required for command responder + applications, used for counting error conditions." + ::= { snmpTargetGroups 3 } + +END