Hi
thanks. I knew more or less the process and I needed all the details about where to put things in the file system.
Please do update the web pages with these instructions. If you cannot, I can volunteer to do so (slowly, but I can).
At this point I am also quite afraid about most CVS repositories. I just checked CL-UNIFICATION and there is the same constraint about the LockDir= in the config file which prevents me from checking out the repository; this happens even while I am on the cl.net machine. I am afraid other repositories are in the same situation.
I will now move all my repositories to git.
all the best
Marco
On Dec 3, 2014, at 10:07 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
this is the best walkthrough I could find:
http://stackoverflow.com/questions/881158/is-there-a-migration-tool-from-cvs...
after you are done, you can clone the repo to
/project/clazy/git/clazy.git
This is done by first cloning your repo like this:
git clone --bare /path/to/repo/with/checked/out/source/of/clazy
in an appropriate directory, and then uploading the clazy.git directory to the server. There, the directory and its contents should be chgrouped to clazy,
chgrp -R clazy clazy.git
and its mode set like this
chmod t+g clazy.git
The repo will be picked up by the mighty scripts at some point and made available to git-daemon, etc.
If you require any help, please let us know.
Regards, Mario
On Tue, 2 Dec 2014 22:04:49 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
I prefer to move to git.
Please let me know how to do it. Eventually I will move to git all my repositories.
But please update the web pages with the instructions.
Thanks
Marco
On Dec 2, 2014, at 21:42 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
Do you want to us to (help) clean up the hierarchy or do you prefer to move to git?
Regards,
Erik.
On Tue, Dec 2, 2014 at 9:32 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: BTW.
Looking at the CVS with http://common-lisp.net/viewvc/clazy/ I notice that the directory structure is rather messed up. I suppose it is a leftover of the many transfers but it is rather confusing.
I suppose I could move the whole repository to git, but in that case I need instructions. I cannot find them on the web site.
Cheers
Marco
On Dec 2, 2014, at 21:25 , Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Ok. But that is what I read on
http://common-lisp.net/project-intro/
I did a cut-n-paste from the page. Time to update the page content?
Marco
On Dec 2, 2014, at 21:16 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
ViewCVS has been renamed several years ago to ViewVC, which is available at http://common-lisp.net/viewvc/clazy/
HTH,
Erik.
On Tue, Dec 2, 2014 at 8:01 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: http://common-lisp.net/cgi-bin/viewcvs.cgi/?cvsroot=clazy
Gives me a 404...
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
Hi Marco,
did the fix work for clazy's cvs repo? If yes, I can fix the rest of the cvs repos relatively easily.
If you want to edit the web pages - next week I'll set up an appropriate git repo and send you the access (Thanks!).
Regards, Mario
On Fri, 5 Dec 2014 08:27:39 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Hi
thanks. I knew more or less the process and I needed all the details about where to put things in the file system.
Please do update the web pages with these instructions. If you cannot, I can volunteer to do so (slowly, but I can).
At this point I am also quite afraid about most CVS repositories. I just checked CL-UNIFICATION and there is the same constraint about the LockDir= in the config file which prevents me from checking out the repository; this happens even while I am on the cl.net machine. I am afraid other repositories are in the same situation.
I will now move all my repositories to git.
all the best
Marco
On Dec 3, 2014, at 10:07 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
this is the best walkthrough I could find:
http://stackoverflow.com/questions/881158/is-there-a-migration-tool-from-cvs...
after you are done, you can clone the repo to
/project/clazy/git/clazy.git
This is done by first cloning your repo like this:
git clone --bare /path/to/repo/with/checked/out/source/of/clazy
in an appropriate directory, and then uploading the clazy.git directory to the server. There, the directory and its contents should be chgrouped to clazy,
chgrp -R clazy clazy.git
and its mode set like this
chmod t+g clazy.git
The repo will be picked up by the mighty scripts at some point and made available to git-daemon, etc.
If you require any help, please let us know.
Regards, Mario
On Tue, 2 Dec 2014 22:04:49 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
I prefer to move to git.
Please let me know how to do it. Eventually I will move to git all my repositories.
But please update the web pages with the instructions.
Thanks
Marco
On Dec 2, 2014, at 21:42 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
Do you want to us to (help) clean up the hierarchy or do you prefer to move to git?
Regards,
Erik.
On Tue, Dec 2, 2014 at 9:32 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: BTW.
Looking at the CVS with http://common-lisp.net/viewvc/clazy/ I notice that the directory structure is rather messed up. I suppose it is a leftover of the many transfers but it is rather confusing.
I suppose I could move the whole repository to git, but in that case I need instructions. I cannot find them on the web site.
Cheers
Marco
On Dec 2, 2014, at 21:25 , Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Ok. But that is what I read on
http://common-lisp.net/project-intro/
I did a cut-n-paste from the page. Time to update the page content?
Marco
On Dec 2, 2014, at 21:16 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
ViewCVS has been renamed several years ago to ViewVC, which is available at http://common-lisp.net/viewvc/clazy/
HTH,
Erik.
On Tue, Dec 2, 2014 at 8:01 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: http://common-lisp.net/cgi-bin/viewcvs.cgi/?cvsroot=clazy
Gives me a 404...
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
On Dec 5, 2014, at 09:12 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
did the fix work for clazy's cvs repo? If yes, I can fix the rest of the cvs repos relatively easily.
No I have not. I will just move over to git. But you should have a go to fixing the other CVS repositories; maybe people do not use CVS anymore, but somebody out there may.
If you want to edit the web pages - next week I'll set up an appropriate git repo and send you the access (Thanks!).
Please do so. You should also set up a sandbox for the people on clo-devel, where they can see the changes before going public.
all the best
Marco
Regards, Mario
On Fri, 5 Dec 2014 08:27:39 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Hi
thanks. I knew more or less the process and I needed all the details about where to put things in the file system.
Please do update the web pages with these instructions. If you cannot, I can volunteer to do so (slowly, but I can).
At this point I am also quite afraid about most CVS repositories. I just checked CL-UNIFICATION and there is the same constraint about the LockDir= in the config file which prevents me from checking out the repository; this happens even while I am on the cl.net machine. I am afraid other repositories are in the same situation.
I will now move all my repositories to git.
all the best
Marco
On Dec 3, 2014, at 10:07 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
this is the best walkthrough I could find:
http://stackoverflow.com/questions/881158/is-there-a-migration-tool-from-cvs...
after you are done, you can clone the repo to
/project/clazy/git/clazy.git
This is done by first cloning your repo like this:
git clone --bare /path/to/repo/with/checked/out/source/of/clazy
in an appropriate directory, and then uploading the clazy.git directory to the server. There, the directory and its contents should be chgrouped to clazy,
chgrp -R clazy clazy.git
and its mode set like this
chmod t+g clazy.git
The repo will be picked up by the mighty scripts at some point and made available to git-daemon, etc.
If you require any help, please let us know.
Regards, Mario
On Tue, 2 Dec 2014 22:04:49 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
I prefer to move to git.
Please let me know how to do it. Eventually I will move to git all my repositories.
But please update the web pages with the instructions.
Thanks
Marco
On Dec 2, 2014, at 21:42 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
Do you want to us to (help) clean up the hierarchy or do you prefer to move to git?
Regards,
Erik.
On Tue, Dec 2, 2014 at 9:32 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: BTW.
Looking at the CVS with http://common-lisp.net/viewvc/clazy/ I notice that the directory structure is rather messed up. I suppose it is a leftover of the many transfers but it is rather confusing.
I suppose I could move the whole repository to git, but in that case I need instructions. I cannot find them on the web site.
Cheers
Marco
On Dec 2, 2014, at 21:25 , Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Ok. But that is what I read on
http://common-lisp.net/project-intro/
I did a cut-n-paste from the page. Time to update the page content?
Marco
> On Dec 2, 2014, at 21:16 , Erik Huelsmann ehuels@gmail.com > wrote: > > Hi Marco, > > > ViewCVS has been renamed several years ago to ViewVC, which is > available at http://common-lisp.net/viewvc/clazy/ > > HTH, > > Erik. > > > On Tue, Dec 2, 2014 at 8:01 PM, Marco Antoniotti > marcoxa@cs.nyu.edu wrote: > http://common-lisp.net/cgi-bin/viewcvs.cgi/?cvsroot=clazy > > Gives me a 404... > > -- > Marco Antoniotti > > > > _______________________________________________ > Clo-devel mailing list > Clo-devel@common-lisp.net > http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel > > > > -- > Bye, > > Erik. > > http://efficito.com -- Hosted accounting and ERP. > Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Marco Antoniotti
Hi,
I just fixed all the cvs repos.
Regards, Mario
On Fri, 5 Dec 2014 09:15:56 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
On Dec 5, 2014, at 09:12 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
did the fix work for clazy's cvs repo? If yes, I can fix the rest of the cvs repos relatively easily.
No I have not. I will just move over to git. But you should have a go to fixing the other CVS repositories; maybe people do not use CVS anymore, but somebody out there may.
If you want to edit the web pages - next week I'll set up an appropriate git repo and send you the access (Thanks!).
Please do so. You should also set up a sandbox for the people on clo-devel, where they can see the changes before going public.
all the best
Marco
Regards, Mario
On Fri, 5 Dec 2014 08:27:39 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
Hi
thanks. I knew more or less the process and I needed all the details about where to put things in the file system.
Please do update the web pages with these instructions. If you cannot, I can volunteer to do so (slowly, but I can).
At this point I am also quite afraid about most CVS repositories. I just checked CL-UNIFICATION and there is the same constraint about the LockDir= in the config file which prevents me from checking out the repository; this happens even while I am on the cl.net machine. I am afraid other repositories are in the same situation.
I will now move all my repositories to git.
all the best
Marco
On Dec 3, 2014, at 10:07 , Mario S. Mommer mommer@moss-clad.net wrote:
Hi Marco,
this is the best walkthrough I could find:
http://stackoverflow.com/questions/881158/is-there-a-migration-tool-from-cvs...
after you are done, you can clone the repo to
/project/clazy/git/clazy.git
This is done by first cloning your repo like this:
git clone --bare /path/to/repo/with/checked/out/source/of/clazy
in an appropriate directory, and then uploading the clazy.git directory to the server. There, the directory and its contents should be chgrouped to clazy,
chgrp -R clazy clazy.git
and its mode set like this
chmod t+g clazy.git
The repo will be picked up by the mighty scripts at some point and made available to git-daemon, etc.
If you require any help, please let us know.
Regards, Mario
On Tue, 2 Dec 2014 22:04:49 +0100 Marco Antoniotti marcoxa@cs.nyu.edu wrote:
I prefer to move to git.
Please let me know how to do it. Eventually I will move to git all my repositories.
But please update the web pages with the instructions.
Thanks
Marco
On Dec 2, 2014, at 21:42 , Erik Huelsmann ehuels@gmail.com wrote:
Hi Marco,
Do you want to us to (help) clean up the hierarchy or do you prefer to move to git?
Regards,
Erik.
On Tue, Dec 2, 2014 at 9:32 PM, Marco Antoniotti marcoxa@cs.nyu.edu wrote: BTW.
Looking at the CVS with http://common-lisp.net/viewvc/clazy/ I notice that the directory structure is rather messed up. I suppose it is a leftover of the many transfers but it is rather confusing.
I suppose I could move the whole repository to git, but in that case I need instructions. I cannot find them on the web site.
Cheers
Marco
> On Dec 2, 2014, at 21:25 , Marco Antoniotti > marcoxa@cs.nyu.edu wrote: > > Ok. But that is what I read on > > http://common-lisp.net/project-intro/ > > I did a cut-n-paste from the page. Time to update the page > content? > > Marco > > > > > >> On Dec 2, 2014, at 21:16 , Erik Huelsmann ehuels@gmail.com >> wrote: >> >> Hi Marco, >> >> >> ViewCVS has been renamed several years ago to ViewVC, which is >> available at http://common-lisp.net/viewvc/clazy/ >> >> HTH, >> >> Erik. >> >> >> On Tue, Dec 2, 2014 at 8:01 PM, Marco Antoniotti >> marcoxa@cs.nyu.edu wrote: >> http://common-lisp.net/cgi-bin/viewcvs.cgi/?cvsroot=clazy >> >> Gives me a 404... >> >> -- >> Marco Antoniotti >> >> >> >> _______________________________________________ >> Clo-devel mailing list >> Clo-devel@common-lisp.net >> http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel >> >> >> >> -- >> Bye, >> >> Erik. >> >> http://efficito.com -- Hosted accounting and ERP. >> Robust and Flexible. No vendor lock-in. > > -- > Marco Antoniotti > > > > _______________________________________________ > Clo-devel mailing list > Clo-devel@common-lisp.net > http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Bye,
Erik.
http://efficito.com -- Hosted accounting and ERP. Robust and Flexible. No vendor lock-in.
-- Marco Antoniotti
Clo-devel mailing list Clo-devel@common-lisp.net http://mailman.common-lisp.net/cgi-bin/mailman/listinfo/clo-devel
-- Marco Antoniotti
-- Marco Antoniotti
-
Marco Antoniotti -
Mario S. Mommer