This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "CMU Common Lisp".
The branch, rearrange-dir has been updated via 26f37caf6696a9a8816c5872526c88d94845c187 (commit) from 4f7056212a2c6de20d0ae59776e9c29cdb4e9d26 (commit)
Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.
- Log ----------------------------------------------------------------- commit 26f37caf6696a9a8816c5872526c88d94845c187 Author: Raymond Toy toy.raymond@gmail.com Date: Sat Nov 5 22:51:11 2011 -0700
Update paths to new locations.
diff --git a/BUILDING b/BUILDING index 675cb99..c11ef26 100644 --- a/BUILDING +++ b/BUILDING @@ -55,17 +55,14 @@ Setting up a build environment
or, if you want to use the git sources directly:
- git clone git://common-lisp.net/projects/cmucl/cmucl.git src - - (The "src" is important to keep everything the same with git as it - was with cvs.) + git clone git://common-lisp.net/projects/cmucl/cmucl.git
Whatever you do, the sources must be in a directory named src inside the base directory. Since the build tools keep all generated files in separate target directories, the src directory can be read-only (e.g. mounted read-only via NFS, etc.)
- The build tools are all in the src/tools directory. + The build tools are all in the bin directory.
That's it, you are now ready to build CMU CL.
@@ -82,7 +79,7 @@ a) Simple builds Use this to build from a version of CMUCL that is very close to the sources you are trying to build now:
- src/tools/build.sh -C "" -o "<name-of-old-lisp> <options-to-lisp>" + bin/build.sh -C "" -o "<name-of-old-lisp> <options-to-lisp>"
This will build CMUCL 3 times, each time with the result of the previous build. The last time, the additional libraries like CLX, @@ -101,7 +98,7 @@ b) Slightly more complicated builds
For these, you can use this:
- src/tools/build.sh -C "" -o "<old-lisp>" -B boot1.lisp -B boot2.lisp + bin/build.sh -C "" -o "<old-lisp>" -B boot1.lisp -B boot2.lisp
The bootstrap files listed with the -B option (as many as needed) are loaded in order, so be sure to get them right. @@ -124,8 +121,8 @@ read the bootfiles for additional instructions, if any.
If there are no bootfiles, then you can use a) above.
-The build.sh script supports other options, and src/tools/build.sh -? -will give a quick summary. Read src/tools/build.sh for more +The build.sh script supports other options, and bin/build.sh -? +will give a quick summary. Read bin/build.sh for more information.
A general outline of the build process @@ -219,10 +216,10 @@ To complete the build so that you something similar to what the releases of CMUCL do, there are a few more steps:
e) Build the utilities like Gray streams, simple streams, CLX, CLM, - and Hemlock. Use the src/tools/build-utils.sh script for this, as + and Hemlock. Use the bin/build-utils.sh script for this, as described below
-f) Create tarfiles using the src/tools/make-dist.sh script, as +f) Create tarfiles using the bin/make-dist.sh script, as explained below.
With these tarfiles, you can install them anywhere. The contents of @@ -246,13 +243,13 @@ the scripts included with this little text? Overview of the included build scripts --------------------------------------
-* src/tools/build.sh [-123obvuBCU?] +* bin/build.sh [-123obvuBCU?]
This is the main build script. It essentially calls the other build scripts described below in the proper sequence to build cmucl from an existing binary of cmucl.
-* src/tools/create-target.sh target-directory [lisp-variant [motif-variant]] +* bin/create-target.sh target-directory [lisp-variant [motif-variant]]
This script creates a new target directory, which is a shadow of the source directory, that will contain all the files that are created by @@ -290,7 +287,7 @@ sample setenv.lisp includes a set of features that should work for the intended configuration. Note also that some adding or removing some features may require a cross-compile instead of a normal compile.
-* src/tools/clean-target.sh [-l] target-directory [more dirs] +* bin/clean-target.sh [-l] target-directory [more dirs]
Cleans the given target directory, so that all created files will be removed. This is useful to force recompilation. If the -l flag is @@ -298,7 +295,7 @@ given, then the C runtime is also removed, including all the lisp executable, any lisp cores, all object files, lisp.nm, internals.h, and the config file.
-* src/tools/build-world.sh target-directory [build-binary] [build-flags...] +* bin/build-world.sh target-directory [build-binary] [build-flags...]
Starts a complete world build for the given target, using the lisp binary/core specified as a build host. The recompilation step will @@ -309,13 +306,13 @@ step of the world build will inform you of that fact. In that case, you'll have to use the rebuild-lisp.sh script, and then restart the world build process with build-world.sh
-* src/tools/rebuild-lisp.sh target-directory +* bin/rebuild-lisp.sh target-directory
This script will force a complete recompilation of the C runtime code of CMU CL (aka the lisp executable). Doing this will necessitate building a new kernel.core file, using build-world.sh.
-* src/tools/load-world.sh target-directory version +* bin/load-world.sh target-directory version
This will finish the CMU CL rebuilding process, by loading the remaining compiled files generated in the world build process into the @@ -330,14 +327,14 @@ ISO8601 format is often a good idea, e.g. "18d+ 2002-05-06" for a binary that is based on sources current on the 6th May, 2002, which is post the 18d release.
-* src/tools/build-utils.sh target-directory +* bin/build-utils.sh target-directory
This script will build auxiliary libraries packaged with CMU CL, including CLX, CMUCL/Motif, the Motif debugger, inspector, and control panel, and the Hemlock editor. It will use the lisp executable and core of the given target.
-* src/tools/make-dist.sh [-bg] [-G group] [-O owner] target-directory version arch os +* bin/make-dist.sh [-bg] [-G group] [-O owner] target-directory version arch os
This script creates both main and extra distribution tarballs from the given target directory, using the make-main-dist.sh and @@ -369,7 +366,7 @@ names will have the form: Of course, the "bz2" will be "gz" if you specified gzip compression instead of bzip.
-* /src/tools/make-main-dist.sh target-directory version arch os +* /bin/make-main-dist.sh target-directory version arch os
This is script is not normally invoked by the user; make-dist will do it appropriately. @@ -382,7 +379,7 @@ simple streams.
This is intended to be run from make-dist.sh.
-* src/tools/make-extra-dist.sh target-directory version arch os +* bin/make-extra-dist.sh target-directory version arch os
This is script is not normally invoked by the user; make-dist will do it appropriately. @@ -426,7 +423,7 @@ Set up everything as described in the setup section above. Then execute:
# Create a new target directory structure/config for OpenBSD: -src/tools/create-target.sh openbsd OpenBSD_gencgc OpenBSD +bin/create-target.sh openbsd OpenBSD_gencgc OpenBSD
# edit openbsd/setenv.lisp to contain what we want: cat <<EOF > openbsd/setenv.lisp @@ -452,7 +449,7 @@ cat <<EOF > openbsd/setenv.lisp EOF
# Recompile the lisp world, and dump a new kernel.core: -src/tools/build-world.sh openbsd lisp # Or whatever you need to invoke your +bin/build-world.sh openbsd lisp # Or whatever you need to invoke your # current lisp binary+core
# If build-world tells you (as it will the first time) that: @@ -462,15 +459,15 @@ src/tools/build-world.sh openbsd lisp # Or whatever you need to invoke your # build-world.sh:
# Recompile lisp binary itself: -src/tools/rebuild-lisp.sh openbsd +bin/rebuild-lisp.sh openbsd
# Restart build-world.sh now: -src/tools/build-world.sh openbsd lisp +bin/build-world.sh openbsd lisp
# Now we populate the kernel.core with further compiled files, # and dump the final lisp.core file:
-src/tools/load-world.sh openbsd "18d+ 2002-05-06" +bin/load-world.sh openbsd "18d+ 2002-05-06"
# The second argument above is the version number that the built # core will announce. Please always put the build-date and some @@ -555,8 +552,8 @@ up-to-date with the current sources. Create a cross-compiler directory to hold the cross-compiler and a target directory to hold the result:
- src/tools/create-target.sh xcross - src/tools/create-target.sh xtarget + bin/create-target.sh xcross + bin/create-target.sh xtarget
2. Adjust cross-compilation script
@@ -592,13 +589,13 @@ up-to-date with the current sources. 3. Build the cross compiler and target Now compile the result:
- src/tools/cross-build-world.sh xtarget xcross xtarget/cross.lisp [v9 binary] + bin/cross-build-world.sh xtarget xcross xtarget/cross.lisp [v9 binary]
4. Rebuild the lisp files:
When this finishes, you need to compile the C code:
- src/tools/rebuild-lisp.sh xtarget + bin/rebuild-lisp.sh xtarget
At this point, you may want to run cross-build-world.sh again to generate a new kernel.core. It shouldn't build anything; @@ -608,7 +605,7 @@ up-to-date with the current sources.
With the new kernel.core, we need to create a lisp.core:
- src/tools/load-world.sh xtarget "new lisp" + bin/load-world.sh xtarget "new lisp"
Test the result with
@@ -635,8 +632,8 @@ same file system, via NFS or something else. compiled target. We assume we are on ppc/darwin. So, when running create-target.sh we need to specify the target:
- src/tools/create-target.sh x86-cross x86 - src/tools/create-target.sh x86-target x86 + bin/create-target.sh x86-cross x86 + bin/create-target.sh x86-target x86
2. Adjust the cross-compilation script. An example for ppc/darwin to x86/linux is in src/tools/cross-scripts/cross-ppc-x86.lisp. @@ -644,7 +641,7 @@ same file system, via NFS or something else. 3. Build the cross compiler and target, as above, using the specified cross-compile script:
- src/tools/cross-build-world.sh x86-target x86-cross cross.lisp [ppc binary] + bin/cross-build-world.sh x86-target x86-cross cross.lisp [ppc binary]
where cross.lisp is the cross-compile script from 2) above.
@@ -661,13 +658,13 @@ same file system, via NFS or something else.
Compile the lisp code:
- src/tools/rebuild-lisp.sh x86-target + bin/rebuild-lisp.sh x86-target
5. Now run load-world.sh to create the desired lisp.core from lisp and kernel.core. As above, PCL has not been compiled, so select restart 3 (return nil from pclload) to create lisp.core
- src/tools/load-world.sh x86-target "new x86" + bin/load-world.sh x86-target "new x86"
At this point, you will have a shiny new lisp on the new platform. Since it's missing PCL, you will need to do at least one normal build
-----------------------------------------------------------------------
Summary of changes: BUILDING | 69 +++++++++++++++++++++++++++++-------------------------------- 1 files changed, 33 insertions(+), 36 deletions(-)
hooks/post-receive