So, is it working when you use the quicklisp one?

On Sun, Apr 7, 2019 at 6:47 PM David Dmytryk ddmytryk@icloud.com wrote:

Thanks for responding Stas

Yes - it is

David

...

On Apr 7, 2019, at 11:45 AM, Stas Boukarev stassats@gmail.com wrote:

Is your cl-ppcre not coming from quicklisp?

...

On Sun, Apr 7, 2019 at 6:23 PM David Dmytryk ddmytryk@icloud.com wrote:

Hi

Wondering if anybody could help with solution or advice on installing McCLIM on macOS Mojave, running CCL under Emacs / Slime (Clozure Common Lisp Version 1.12-dev (v1.12-dev.4-6-gc3b1e184) DarwinX8664).

I tried to install using Quicklisp and received error response as below.

I am new to lisp, and heavily in learning-mode - would appreciate any help.

Kind Regards

David Dmytryk

CL-USER> (ql:quickload 'mcclim) To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" . Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>.

Here is result of loading and testing cl-ppcre, then loading mcclim:

CL-USER> (ql:quickload :cl-ppcre) To load "cl-ppcre": Load 1 ASDF system: cl-ppcre ; Loading "cl-ppcre"

(:CL-PPCRE) CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre) #<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302003D29B6D> CL-USER> (ql:quickload 'mcclim) To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" . Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>. CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre)

#<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302004049A2D>

On Apr 7, 2019, at 11:57 AM, David Dmytryk ddmytryk@icloud.com wrote:

It is installed in home folder ~quicklisp/dists/quicklisp/software/cl-ppcre-20180831-git/cl-ppcre-unicode

May have made a mess with location?

...

On Apr 7, 2019, at 11:48 AM, Stas Boukarev stassats@gmail.com wrote:

So, is it working when you use the quicklisp one?

...

On Sun, Apr 7, 2019 at 6:47 PM David Dmytryk ddmytryk@icloud.com wrote:

Thanks for responding Stas

Yes - it is

David

...

On Apr 7, 2019, at 11:45 AM, Stas Boukarev stassats@gmail.com wrote:

Is your cl-ppcre not coming from quicklisp?

...

On Sun, Apr 7, 2019 at 6:23 PM David Dmytryk ddmytryk@icloud.com wrote:

Hi

Wondering if anybody could help with solution or advice on installing McCLIM on macOS Mojave, running CCL under Emacs / Slime (Clozure Common Lisp Version 1.12-dev (v1.12-dev.4-6-gc3b1e184) DarwinX8664).

I tried to install using Quicklisp and received error response as below.

I am new to lisp, and heavily in learning-mode - would appreciate any help.

Kind Regards

David Dmytryk

CL-USER> (ql:quickload 'mcclim) To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" . Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>.

CL-USER> (asdf:asdf-version) "3.2.0" CL-USER>

The error message is:

Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.

The installation is using …util.lisp from the cl-unicode folder, different than the cl-ppcre folder. Not sure whether this is a problem

On Apr 7, 2019, at 12:05 PM, Stas Boukarev stassats@gmail.com wrote:

Where does Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" come frome?

And what's your (asdf:asdf-version)?

On Sun, Apr 7, 2019 at 7:03 PM David Dmytryk ddmytryk@icloud.com wrote:

...

Here is result of loading and testing cl-ppcre, then loading mcclim:

CL-USER> (ql:quickload :cl-ppcre) To load "cl-ppcre": Load 1 ASDF system: cl-ppcre ; Loading "cl-ppcre"

(:CL-PPCRE) CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre) #<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302003D29B6D> CL-USER> (ql:quickload 'mcclim) To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" . Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>. CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre)

#<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302004049A2D>

...

On Apr 7, 2019, at 11:57 AM, David Dmytryk ddmytryk@icloud.com wrote:

It is installed in home folder ~quicklisp/dists/quicklisp/software/cl-ppcre-20180831-git/cl-ppcre-unicode

May have made a mess with location?

...

On Apr 7, 2019, at 11:48 AM, Stas Boukarev stassats@gmail.com wrote:

So, is it working when you use the quicklisp one?

...

On Sun, Apr 7, 2019 at 6:47 PM David Dmytryk ddmytryk@icloud.com wrote:

Thanks for responding Stas

Yes - it is

David

...

On Apr 7, 2019, at 11:45 AM, Stas Boukarev stassats@gmail.com wrote:

Is your cl-ppcre not coming from quicklisp?

> On Sun, Apr 7, 2019 at 6:23 PM David Dmytryk ddmytryk@icloud.com wrote: > > Hi > > Wondering if anybody could help with solution or advice on installing McCLIM on macOS Mojave, running CCL under Emacs / Slime (Clozure Common Lisp Version 1.12-dev (v1.12-dev.4-6-gc3b1e184) DarwinX8664). > > I tried to install using Quicklisp and received error response as below. > > I am new to lisp, and heavily in learning-mode - would appreciate any help. > > Kind Regards > > David Dmytryk > > > CL-USER> (ql:quickload 'mcclim) > To load "mcclim": > Load 1 ASDF system: > mcclim > ; Loading "mcclim" > Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" > . > Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. > Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. > Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>.

Stas

Your suggestion to check asdf version prompted me to check version of CL-PPCRE. It was old - I replaced it with latest version and placed the entire cl-ppre-master folder in my home quicklisp/local-projects/libraries folder. It solved the “standard-optimize-settings” problem.

However, when loading McCLIM now getting an error:

NOTE:

   * McCLIM was unable to configure itself automatically using
     fontconfig. Therefore you must configure it manually.

While executing: MCCLIM-TRUETYPE::WARN-ABOUT-UNSET-FONT-PATH, in process Listener(4).

I checked for availability of truetype, and found a TTF folder which I also copied to my Quicklisp local-projects folder. Tried re-running load McCLIM and still shows same problem. The detailed lisp response is below.

Again, would appreciate any advice from you or anyone else who might help resolve.

Thanks

David __________________________________________

Details:

? (ql:quickload 'mcclim)

To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" ...

Error:

   NOTE:
   * McCLIM was unable to configure itself automatically using
     fontconfig. Therefore you must configure it manually.

While executing: MCCLIM-TRUETYPE::WARN-ABOUT-UNSET-FONT-PATH, in process Listener(4). Type cmd-/ to continue, cmd-. to abort, cmd-\ for a list of available restarts. If continued: Proceed Type :? for other options.

1 > ? The following toplevel commands are available: <n> the same as (:C <n>) (:FUNCTION FRAME-NUMBER) Returns the function invoked in backtrace frame <frame-number>. This may be useful for, e.g., disassembly (:FORM FRAME-NUMBER) Return a form which looks like the call which established the stack frame identified by <frame-number>. This is only well-defined in certain cases: when the function is globally named and not a lexical closure and when it was compiled with *SAVE-LOCAL-SYMBOLS* in effect. (:SET-LOCAL NAME FRAME-NUMBER NEW) Set value of argument denoted <name> (see :LOCAL) in frame <frame-number> to value <new>. (:LOCAL NAME FRAME-NUMBER) Return value of local denoted by <name> in frame <frame-number> <name> can either be a symbol - in which case the most recent binding of that symbol is used - or an integer index into the frame's set of local bindings. (:SET-ARG NAME FRAME-NUMBER NEW) Set value of argument named <name> in frame <frame-number> to value <new>. (:ARG NAME FRAME-NUMBER) Return value of argument named <name> in frame <frame-number> (:V N FRAME-NUMBER) Return value <n> in frame <frame-number> (:RAW N) Show raw contents of backtrace frame <n> (:APPLY-IN-FRAME I FUNCTION &REST ARGS) Applies FUNCTION to ARGS in the execution context of the Ith stack frame (:RETURN-FROM-FRAME I &REST VALUES) Return VALUES from the I'th stack frame (:F N) Show backtrace frame <n> (:C &OPTIONAL N) Choose restart <n>. If no <n>, continue (:B &KEY START COUNT SHOW-FRAME-CONTENTS) backtrace :NFRAMES print the number of stack frames accessible from this break loop :R list restarts :Q return to toplevel :GO continue :A exit current break loop :POP exit current break loop :KAP Release (but don't reestablish) *LISTENER-AUTORELEASE-POOL* :SAP Log information about current thread's autorelease-pool(s) to C's standard error stream :RAP Release and reestablish *LISTENER-AUTORELEASE-POOL* :? help :PWD Print the pathame of the current directory (:CD DIR) Change to directory DIR (e.g., #p"ccl:" or "/some/dir") (:PROC &OPTIONAL P) Show information about specified process <p>/all processes (:KILL P) Kill process whose name or ID matches <p> (:Y &OPTIONAL P) Yield control of terminal-input to process whose name or ID matches <p>, or to any process if <p> is null Any other form is evaluated and its results are printed out. 1 > q ?

On Apr 7, 2019, at 12:20 PM, Stas Boukarev stassats@gmail.com wrote:

I can only suggest deleting quicklisp and retrying.

On Sun, Apr 7, 2019 at 7:19 PM David Dmytryk ddmytryk@icloud.com wrote:

...

CL-USER> (asdf:asdf-version) "3.2.0" CL-USER>

The error message is:

Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.

The installation is using …util.lisp from the cl-unicode folder, different than the cl-ppcre folder. Not sure whether this is a problem

...

On Apr 7, 2019, at 12:05 PM, Stas Boukarev stassats@gmail.com wrote:

Where does Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" come frome?

And what's your (asdf:asdf-version)?

On Sun, Apr 7, 2019 at 7:03 PM David Dmytryk ddmytryk@icloud.com wrote:

...

Here is result of loading and testing cl-ppcre, then loading mcclim:

CL-USER> (ql:quickload :cl-ppcre) To load "cl-ppcre": Load 1 ASDF system: cl-ppcre ; Loading "cl-ppcre"

(:CL-PPCRE) CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre) #<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302003D29B6D> CL-USER> (ql:quickload 'mcclim) To load "mcclim": Load 1 ASDF system: mcclim ; Loading "mcclim" Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" . Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>. CL-USER> (asdf:oos 'asdf:test-op :cl-ppcre)

#<TEST-OP> #<ASDF/PLAN:SEQUENTIAL-PLAN #x302004049A2D>

...

On Apr 7, 2019, at 11:57 AM, David Dmytryk ddmytryk@icloud.com wrote:

It is installed in home folder ~quicklisp/dists/quicklisp/software/cl-ppcre-20180831-git/cl-ppcre-unicode

May have made a mess with location?

...

On Apr 7, 2019, at 11:48 AM, Stas Boukarev stassats@gmail.com wrote:

So, is it working when you use the quicklisp one?

> On Sun, Apr 7, 2019 at 6:47 PM David Dmytryk ddmytryk@icloud.com wrote: > > Thanks for responding Stas > > Yes - it is > > David > >> On Apr 7, 2019, at 11:45 AM, Stas Boukarev stassats@gmail.com wrote: >> >> Is your cl-ppcre not coming from quicklisp? >> >>> On Sun, Apr 7, 2019 at 6:23 PM David Dmytryk ddmytryk@icloud.com wrote: >>> >>> Hi >>> >>> Wondering if anybody could help with solution or advice on installing McCLIM on macOS Mojave, running CCL under Emacs / Slime (Clozure Common Lisp Version 1.12-dev (v1.12-dev.4-6-gc3b1e184) DarwinX8664). >>> >>> I tried to install using Quicklisp and received error response as below. >>> >>> I am new to lisp, and heavily in learning-mode - would appreciate any help. >>> >>> Kind Regards >>> >>> David Dmytryk >>> >>> >>> CL-USER> (ql:quickload 'mcclim) >>> To load "mcclim": >>> Load 1 ASDF system: >>> mcclim >>> ; Loading "mcclim" >>> Invoking restart: Ignore attempt to IMPORT "*STANDARD-OPTIMIZE-SETTINGS*" from package "CL-PPCRE" >>> . >>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp. >>> Invoking restart: Retry getting the value of CL-UNICODE::*STANDARD-OPTIMIZE-SETTINGS*. >>> Read error between positions 7396 and 7665 in /Users/daviddmytryk/quicklisp/dists/quicklisp/software/cl-unicode-20180328-git/util.lisp.; Evaluation aborted on #<UNBOUND-VARIABLE #x302003F8238D>. >