slime-devel August 2007

slime-devel@common-lisp.net

32 participants
61 discussions

Start a nNew thread

[slime-devel] Post your ads where people read them!!!
by Feed＠common-lisp.net 27 Aug '07

27 Aug '07

1 0

[slime-devel] SLIME 2007-03-24 change to remove the timer for async REPL output
by Matthias Koeppe 26 Aug '07

26 Aug '07

Helmut, the change below (from 2007-03-24) causes the output and the REPL result to be displayed in the wrong order (occasionally, non-deterministically), when *use-dedicated-output-stream* = t. (This was reported on the mailing list on 2007-04-22 and I can reproduce it; however, I am normally not using this mode myself.) The reason is a race between the REPL results (sent through SLIME events) and the regular process output (sent through the dedicated stream). The removed code worked around this race by waiting a small amount of time. 2007-03-24 Helmut Eller <heller(a)common-lisp.net> * slime.el (slime-repl-insert-prompt): Use insert-before-markers. This fixes some redisplay problems, but I don't know why. Also: remove the timer for async output. (slime-repl-move-output-mark-before-prompt): Removed. I would like to re-introduce (and document the rationale of) the removed code using the patch below, for the benefit of users of *use-dedicated-output-stream* = t. Any objections? Matthias --- slime.el 25 Aug 2007 13:02:47 -0700 1.815 +++ slime.el 25 Aug 2007 16:53:15 -0700 @@ -3710,11 +3716,30 @@ (insert-before-markers prompt)) (set-marker slime-repl-prompt-start-mark prompt-start) (goto-char slime-repl-prompt-start-mark) - (slime-mark-output-start) + ;;(slime-mark-output-start) + ;;; We wish to distinguish between the output of a command + ;;; and asynchronous output (caused by another thread) that happens to be sent. + ;;; The command output should appear before the REPL result; + ;;; the asynchronous output should appear after it. + ;;; + ;;; However, when a dedicated output stream is used, there is a + ;;; race between the REPL results (which appear as a SLIME event) + ;;; and the regular output (which appears on the dedicated + ;;; stream). As a workaround, after a small amount of time, + ;;; decide that all following output is asynchronous output. + (run-at-time 0.2 nil 'slime-repl-move-output-mark-before-prompt + (current-buffer)) (goto-char (point-max)) (slime-mark-input-start)) (slime-repl-show-maximum-output)) +(defun slime-repl-move-output-mark-before-prompt (buffer) + (when (buffer-live-p buffer) + (with-current-buffer buffer + (save-excursion + (goto-char slime-repl-prompt-start-mark) + (slime-mark-output-start))))) + (defun slime-repl-show-maximum-output (&optional force) "Put the end of the buffer at the bottom of the window." (assert (eobp)) -- Matthias Köppe -- http://www.math.uni-magdeburg.de/~mkoeppe (currently @math.ucdavis.edu)

3 4

[slime-devel] M-. causes errors like "Symbol's value as variable is void: OLDEND+91591"
by Matthias Koeppe 26 Aug '07

26 Aug '07

Tobias, I am frequently getting Emacs Lisp errors like the following when I use M-. in Lisp buffers. slime-goto-location-position: Symbol's value as variable is void: OLDEND+91591 I believe this is related to this change, but I have not tried to debug it. 2007-08-15 Tobias C. Rittweiler <tcr(a)freebits.de> Make `M-.' work on definitions outside the current restriction. `M-,' will also properly restore the narrowing as of before the jump. Similiarly for quiting from the compilation notes buffer and the Xref buffers. Can you look into that? Matthias -- Matthias Köppe -- http://www.math.uni-magdeburg.de/~mkoeppe (currently @math.ucdavis.edu)

2 2

[slime-devel] Evaluate forms from within Lisp buffers and displaying the result in the REPL
by Rainer Joswig 26 Aug '07

26 Aug '07

Hi, I'm a bit used to the behavior of MCL when it comes to Lisp buffers and listeners. Maybe SLIME developers know how to achieve a similar behavior or would like to provide something similar. MCL allowed multiple Lisp text editor windows and listener windows. If there are multiple listeners one is the front most. If the cursor is behind a Lisp form in a Lisp editor window, one can press Enter (or control-return) and the form will be enqueued into the REPL of the front most listener. Doing this in a listener, the form will be displayed at the prompt and enqueued in the listener's REPL. Pressing Enter only has the effect that the form and the result is shown in the listener. In the Editor window, nothing happens (no cursor moved, no character entered, no window focus changed). The listener REPL gets the forms from its queue and displays the form and the result at the end of the current buffer. This way you get interaction histories in the listener. Currently SLIME lets me evaluate a form in a text buffer and the form gets printed into the listener and the result gets printed in the mini-buffer. I can see then in the listener the history of evaluated forms, but not the history of results. Additionally the form will be printed with additional characters before and after. SLIME displays several forms evaluated from a text buffer in the REPL like this: ;;;; (+ 1 2) ... ;;;; (+ 1 2) ... ;;;; (+ 1 2) ... The normal REPL interaction display would be like: CL-USER> (+ 1 2) 3 CL-USER> (+ 1 2) 3 CL-USER> (+ 1 2) 3 Both ways look different. Why not use the latter for both interactions? Useful is then also a command to rotate between the various listeners (next, previous) and Lisp buffers (next, previous). Advantages I see for MCL: * With MCL you get the same REPL listener display if you evaluate forms from the Lisp editor buffer (via RETURN) or if you use the REPL in the listener. * Using the enter key (vs. Return) to evaluate code in the editor gets rid of one complex keystroke. * One gets reusable interaction histories in the listener where form and result are displayed together. Is SLIME already providing something similar? Would others find this way of interaction between Lisp buffers and a REPL buffer useful? Regards, Rainer Joswig -- http://lispm.dyndns.org

9 21

[slime-devel] Daily ChangeLog diff
by mbaringer＠common-lisp.net 26 Aug '07

26 Aug '07

Index: slime/ChangeLog diff -u slime/ChangeLog:1.1162 slime/ChangeLog:1.1165 --- slime/ChangeLog:1.1162 Fri Aug 24 20:52:06 2007 +++ slime/ChangeLog Sat Aug 25 16:05:00 2007 @@ -1,3 +1,39 @@ +2007-08-25 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> + + New command slime-redirect-trace-output creates a separate Emacs + buffer, where all subsequent trace output is sent. + + * slime.el (slime-last-output-target-id): New variable. + (slime-output-target-to-marker): New variable. + (slime-write-string): Handle general "target" arguments using + slime-output-target-to-marker. + (slime-redirect-trace-output): New command. + (slime-easy-menu): Add a menu item for it. + + * slime.el (slime-mark-presentation-start) + (slime-mark-presentation-end): Make "target" argument optional. + + * swank.lisp (make-output-stream-for-target): New function, + factored out from open-streams. + (open-streams): Use it here. + + * swank.lisp (connection): New slot "trace-output". + (call-with-redirected-io): Use it here. + (redirect-trace-output): New slimefun; set the slot to a new + target stream. + +2007-08-25 Tobias C. Rittweiler <tcr(a)freebits.de> + + * slime.el (save-restriction-if-possible): Fixed typo in + macroexpansion. Thanks to Matthias Koeppe for reporting. + +2007-08-24 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> + + * slime.el (slime-insert-arglist): Removed, superseded by + slime-complete-form since 2005-02-20. + + * swank.lisp (arglist-for-insertion): Now unused, removed. + 2007-08-24 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> Some fixes to the presentation-streams contrib.

1 0

[slime-devel] swank:arglist-for-insertion & slime-insert-arglist
by Tobias C. Rittweiler 25 Aug '07

25 Aug '07

Hi, is anybody still using `slime-insert-arglist' in any way? It seems that it got superseded by `slime-complete-form' (C-c C-s) back in 2002. I hereby request removal. (Matthias, any comments from your part?) -T.

2 3

[slime-devel] Daily ChangeLog diff
by mbaringer＠common-lisp.net 25 Aug '07

25 Aug '07

Index: slime/ChangeLog diff -u slime/ChangeLog:1.1153 slime/ChangeLog:1.1162 --- slime/ChangeLog:1.1153 Thu Aug 23 18:50:57 2007 +++ slime/ChangeLog Fri Aug 24 20:52:06 2007 @@ -1,14 +1,108 @@ +2007-08-24 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> + + Some fixes to the presentation-streams contrib. + + * slime.el (slime-dispatch-event): Handle new optionals args of + messages :presentation-start and :presentation-end. + + * slime.el (slime-mark-presentation-start) + (slime-mark-presentation-end): New arg "target"; record + presentation boundaries separately for REPL results and regular + process output. This fixes the presentation markup of REPL + results when the presentation-streams contrib is loaded. + +2007-08-24 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> + + Make the fancy presentation-streams feature a contrib. + Previously, it was only available if "present.lisp" was loaded + manually. Now it can be loaded automatically using: + + (add-hook 'slime-load-hook + (lambda () (require 'slime-presentation-streams))) + + Note that the normal presentations that are created by REPL + results, the inspector, and the debugger are NOT dependent on this + code. + + * present.lisp: Moved to contrib/swank-presentation-streams.lisp. + * swank-loader.lisp (*contribs*): Add swank-presentation-streams. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + Move typeout frame to contrib. + + * slime.el (slime-message-function, slime-background-message-function) + (slime-autodoc-message-function): New variables. + (slime-message, slime-background-message) + (slime-autodoc-message): Call the function in the respective + variable, so that the typeout window can be plugged in. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + Move xref and class browser to contrib. + + * slime.el (slime-browse-classes, slime-browse-xrefs): Gone. The + Common Lisp part is still there. + +2007-08-24 Tobias C. Rittweiler <tcr(a)freebits.de> + + * slime.el (slime-forward-blanks): Wrapped w/ `ignore-errors.' + (slime-sexp-at-point): Return results as a list of strings, rather + than just one big string if called with arg > 1. + (slime-parse-extended-operator-name): Wrapping some movement code + in `ignore-errors'. Adapted to new return value of + `slime-enclosing-form-specs'. Minor cosmetic changes. + (slime-make-extended-operator-parser/look-ahead): Adapted to + changes of the ``raw form spec'' format; returns a form of + strings, instead of a string of a form. + (slime-parse-extended-operator/declare): Simplified. Adapted to + changes of the ``raw form spec'' format; passes decl-identifiers, + or typespec-operators respectively, along the decl/type-spec. + (%slime-in-mid-of-typespec-p): Removed. Replaced by an regexp + based approach. + (%slime-nesting-until-point): New helper for + `slime-parse-extended-operator/declare'. + + * swank.lisp (parse-form-spec): Adapted to new ``raw form spec'' + format. Updated format description in docstring accordingly. The + new format allows less interning of wrong symbols names comming + from Slime. Thanks to Matthias Koeppe for spotting this. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + Move slime-highlight-edits-mode to contrib. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + Move slime-scratch to contrib. + + * slime.el (slime-scratch): Gone. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + Various cleanups related to slime-insert-propertized. + + * slime.el (slime-with-rigid-indentation): Fix evaluation order. + (slime-indent-rigidly): New. + (slime-insert-possibly-as-rectange): Don't set mark. + (slime-insert-propertized): Use plain insert instead of + slime-insert-possibly-as-rectange. + +2007-08-24 Helmut Eller <heller(a)common-lisp.net> + + * swank-sbcl.lisp (sbcl-inspector): Fix typo. + 2007-08-23 Matthias Koeppe <mkoeppe(a)mail.math.uni-magdeburg.de> Repair inspection of presentations. - + * swank.lisp (inspect-presentation): New slimefun. * slime.el (slime-inspect-presentation-at-mouse): Use it here. 2007-08-23 Helmut Eller <heller(a)common-lisp.net> Move Marco Baringer's inspector to contrib. - + * swank.lisp (*default-inspector*): New variable. Set this variable dispatch to different inspectors. (inspect-object): Use it.

1 0

[slime-devel] "How would you like to have your ad on 2 Million Websites ?"
by BlogBlaster＠common-lisp.net 24 Aug '07

24 Aug '07

1 0

[slime-devel] CVS repository permissions for "contrib" directory
by Matthias Koeppe 24 Aug '07

24 Aug '07

Hi, could some fix the CVS repository permissions for the "contrib" subdirectory of SLIME? I was unable to add new files: cvs commit: ERROR: cannot write file /project/slime/cvsroot/slime/contrib/swank-presentation-streams.lisp,v: Permission denied cvs commit: ERROR: cannot write file /project/slime/cvsroot/slime/contrib/slime-presentation-streams.el,v: Permission denied Matthias -- Matthias Köppe -- http://www.math.uni-magdeburg.de/~mkoeppe (currently @math.ucdavis.edu)

2 1

[slime-devel] Vanilla SLIME broken
by Dan Farina 24 Aug '07

24 Aug '07

As of this moment after freshly checking out vanilla SLIME and deleting all my stale fasls in ~/.slime I can no longer start SLIME successfully. I suspect it is probably a trivial bug that has to do with the recent work with the inspector. Attached is a full trace of emacs attempting to start up SLIME and failing on a condition. df

4 5

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

slime-devel August 2007