[hunchentoot-devel] Problem with SBCL 1.0.18
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL 1.0.12 and Hunchentoot 0.15.2. Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED] I also got this error when I returned to Hunchentoot 0.15.2. I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7) andy peterson.
Andrew, could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only available through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of the compilation. Thanks, Hans 2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL 1.0.12 and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
Hans, The Hunchentoot development version compiles fine in SBCL 1.0.18 (Linux 64 bits) using all libraries in the ediware tree. SBCL 1.0.18 was compiled from the source using SBCL 1.0.12. I do this by removing all *.fasl in the libraries. then enter (require :hunchentoot) But (defvar *server* (hunchentoot:start-server :port 8080)) does not return. It hangs REPL. But it is running. http://localhost:8080/ returns the default hunchentoot page. The same holds true for SBCL 1.0.17 (binary download). But SBCL 1.0.12 compiles and runs right, start-server does return and my code runs fine. Thanks Andy On Tue, Jul 8, 2008 at 12:54 AM, Hans Hübner <hans@huebner.org> wrote:
Andrew,
could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only available through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of the compilation.
Thanks, Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL 1.0.12 and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log
Andy, did you build SBCL 1.0.18 with threads? From what you write I would guess that you are using a non-threaded Lisp. START-SERVER does not return in this case, as all request processing is done in the foreground. The SBCL 1.0.17 binary that you downloaded should be threaded, though. -Hans 2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Hans,
The Hunchentoot development version compiles fine in SBCL 1.0.18 (Linux 64 bits) using all libraries in the ediware tree. SBCL 1.0.18 was compiled from the source using SBCL 1.0.12.
I do this by removing all *.fasl in the libraries. then enter (require :hunchentoot) But (defvar *server* (hunchentoot:start-server :port 8080)) does not return. It hangs REPL. But it is running. http://localhost:8080/ returns the default hunchentoot page.
The same holds true for SBCL 1.0.17 (binary download).
But SBCL 1.0.12 compiles and runs right, start-server does return and my code runs fine.
Thanks
Andy
On Tue, Jul 8, 2008 at 12:54 AM, Hans Hübner <hans@huebner.org> wrote:
Andrew,
could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only available through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of the compilation.
Thanks, Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL 1.0.12 and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log _______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
Hans, This appears to be the case with SBCL 1.0.18 and SBCL 1.0.17. In both cases :sb-thread is not in *features* and if I (pushnew :sb-thread *features) (defvar *server* (hunchentoot:start-server :port 8080)) now returns the error: Not supported in unithread builds. I built 1.0.18 with the instructions on SBCL site (sh make.sh). So it is built with whatever default configuration is within the make files. I will advise SBCL of the problem and try to figure out how to build with threads. Thanks for being so responsive, andy On Tue, Jul 8, 2008 at 10:16 AM, Hans Hübner <hans@huebner.org> wrote:
Andy,
did you build SBCL 1.0.18 with threads? From what you write I would guess that you are using a non-threaded Lisp. START-SERVER does not return in this case, as all request processing is done in the foreground. The SBCL 1.0.17 binary that you downloaded should be threaded, though.
-Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Hans,
The Hunchentoot development version compiles fine in SBCL 1.0.18 (Linux 64 bits) using all libraries in the ediware tree. SBCL 1.0.18 was compiled from the source using SBCL 1.0.12.
I do this by removing all *.fasl in the libraries. then enter (require :hunchentoot) But (defvar *server* (hunchentoot:start-server :port 8080)) does not return. It hangs REPL. But it is running. http://localhost:8080/ returns the default hunchentoot page.
The same holds true for SBCL 1.0.17 (binary download).
But SBCL 1.0.12 compiles and runs right, start-server does return and my code runs fine.
Thanks
Andy
On Tue, Jul 8, 2008 at 12:54 AM, Hans Hübner <hans@huebner.org> wrote:
Andrew,
could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only available through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of the compilation.
Thanks, Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL
1.0.12
and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log _______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log
There isn't an SBCL problem, you just need to enable threads when you build SBCL. See Christophe Rhode's recent message to sbcl-devel:
You need to create a file called customize-target-features.lisp in the sbcl source directory, containing something like (lambda (list) (list* :sb-thread list)) (see section 2.2 of the INSTALL file)
Cyrus On Jul 8, 2008, at 8:46 AM, Andrew Peterson wrote:
Hans,
This appears to be the case with SBCL 1.0.18 and SBCL 1.0.17. In both cases :sb-thread is not in *features* and if I (pushnew :sb- thread *features) (defvar *server* (hunchentoot:start-server :port 8080)) now returns the error: Not supported in unithread builds.
I built 1.0.18 with the instructions on SBCL site (sh make.sh). So it is built with whatever default configuration is within the make files.
I will advise SBCL of the problem and try to figure out how to build with threads.
Thanks for being so responsive,
andy
On Tue, Jul 8, 2008 at 10:16 AM, Hans Hübner <hans@huebner.org> wrote: Andy,
did you build SBCL 1.0.18 with threads? From what you write I would guess that you are using a non-threaded Lisp. START-SERVER does not return in this case, as all request processing is done in the foreground. The SBCL 1.0.17 binary that you downloaded should be threaded, though.
-Hans
Hans,
The Hunchentoot development version compiles fine in SBCL 1.0.18 (Linux 64 bits) using all libraries in the ediware tree. SBCL 1.0.18 was compiled from the source using SBCL 1.0.12.
I do this by removing all *.fasl in the libraries. then enter (require :hunchentoot) But (defvar *server* (hunchentoot:start-server :port 8080)) does not return. It hangs REPL. But it is running. http://localhost:8080/ returns the default hunchentoot page.
The same holds true for SBCL 1.0.17 (binary download).
But SBCL 1.0.12 compiles and runs right, start-server does return and my code runs fine.
Thanks
Andy
On Tue, Jul 8, 2008 at 12:54 AM, Hans Hübner <hans@huebner.org> wrote:
Andrew,
could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only
available
through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>: the
compilation.
Thanks, Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL 1.0.12 and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log _______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log _______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
Yes, You need to create customize-target-features.lisp in the source code directory with (lambda (features) (flet ((enable (x) (pushnew x features)) (disable (x) (setf features (remove x features)))) ;; Threading support, available only on x86/x86-64 Linux, x86 Solaris ;; and x86 Mac OS X (experimental). (enable :sb-thread))) I rebuilt SBCL 1.0.18 and hunchentoot svn version and version 0.15.7 work fine. Thanks, andy On Tue, Jul 8, 2008 at 12:43 PM, Cyrus Harmon <ch-tbnl@bobobeach.com> wrote:
There isn't an SBCL problem, you just need to enable threads when you build SBCL. See Christophe Rhode's recent message to sbcl-devel:
You need to create a file called customize-target-features.lisp in the sbcl source directory, containing something like (lambda (list) (list* :sb-thread list)) (see section 2.2 of the INSTALL file)
Cyrus
On Jul 8, 2008, at 8:46 AM, Andrew Peterson wrote:
Hans,
This appears to be the case with SBCL 1.0.18 and SBCL 1.0.17. In both cases :sb-thread is not in *features* and if I (pushnew :sb-thread *features) (defvar *server* (hunchentoot:start-server :port 8080)) now returns the error: Not supported in unithread builds.
I built 1.0.18 with the instructions on SBCL site (sh make.sh). So it is built with whatever default configuration is within the make files.
I will advise SBCL of the problem and try to figure out how to build with threads.
Thanks for being so responsive,
andy
On Tue, Jul 8, 2008 at 10:16 AM, Hans Hübner <hans@huebner.org> wrote:
Andy,
did you build SBCL 1.0.18 with threads? From what you write I would guess that you are using a non-threaded Lisp. START-SERVER does not return in this case, as all request processing is done in the foreground. The SBCL 1.0.17 binary that you downloaded should be threaded, though.
-Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Hans,
The Hunchentoot development version compiles fine in SBCL 1.0.18 (Linux 64 bits) using all libraries in the ediware tree. SBCL 1.0.18 was compiled from the source using SBCL 1.0.12.
I do this by removing all *.fasl in the libraries. then enter (require :hunchentoot) But (defvar *server* (hunchentoot:start-server :port 8080)) does not return. It hangs REPL. But it is running. http://localhost:8080/ returns the default hunchentoot page.
The same holds true for SBCL 1.0.17 (binary download).
But SBCL 1.0.12 compiles and runs right, start-server does return and my code runs fine.
Thanks
Andy
On Tue, Jul 8, 2008 at 12:54 AM, Hans Hübner <hans@huebner.org> wrote:
Andrew,
could you check whether you have the same problem when you're using the Hunchentoot development version? It is currently only available through Subversion by checking out http://bknr.net/svn/ediware - If that does not work, too, please send a complete error message of the compilation.
Thanks, Hans
2008/7/8 Andrew Peterson <andy.arvid@gmail.com>:
Today, I upgraded to SBCL 1.0.18 and Hunchentoot 0.15.7 from SBCL
1.0.12
and Hunchentoot 0.15.2.
Unfortunately, when SBCL compiles I got this error: erred while invoking #<COMPILE-OP NIL {1002F3BE11}> on #<CL-SOURCE-FILE "port-sbcl" {10031BF5B1}> [Condition of type ASDF:COMPILE-FAILED]
I also got this error when I returned to Hunchentoot 0.15.2.
I returned to SBCL 1.0.12 and Hunchentoot works in both versions (0.15.2 and 0.15.7)
andy peterson.
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log _______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
-- My Exercise Logs: http://andyarvid.infogami.com http://decenturl.com/spreadsheets.google/andys-exercise-log_________________... tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
_______________________________________________ tbnl-devel site list tbnl-devel@common-lisp.net http://common-lisp.net/mailman/listinfo/tbnl-devel
participants (3)
-
Andrew Peterson -
Cyrus Harmon -
Hans Hübner